Search results

The purpose of this paper is to investigate whether is Belgrade (Serbia) suitable candidate for introduction of Heat Health Warning System (HHWS). Belgrade has high population density, considerable share of built up area and lot of multi floor buildings that are factors of heat-health vulnerability.

The authors analyzed the impact of weather conditions on human health in Belgrade during the summer 2007 that was extremely warm in Southeastern Europe and Serbia. Daily cardiovascular, cerebrovascular and respiratory mortality counts were used in Poisson regression model with air temperature as predictor variable. Also, three different heat wave indices (Warm Spell Duration Index, apparent temperature and index based on daily minimum temperature) were tested in order to estimate their ability to capture episodes with mortality higher than expected.

The temperature has the highest influence on cerebrovascular and cardiovascular mortality, while slightly modifies respiratory mortality. According to regression equation, a 1°C increase in mean daily temperature is associated with a 4.6 percent (p<0.0001), 2.2 percent (p<0.0001) and 1.6 percent (insignificant for p<0.10) increase in cerebrovascular, cardiovascular and respiratory mortality, respectively.

Even thought the Law recognizes the heat wave as natural hazard, there is no concrete measures and action for prevention of excess mortality. It is shown that extreme temperature had numerous social consequences on city's residents in the summer 2007. Given the results the authors got, it is recommended that the HHWS should be implemented in health protection plans in Belgrade.

The construction industry remains one of the most hazardous industries worldwide, with a higher number of fatalities and injuries each year. The safety and well-being of workers at a job site are paramount as they face both immediate and long-term risks such as falls and musculoskeletal disorders. To mitigate these dangers, sensor-based technologies have emerged as a crucial tool to promote the safety and well-being of workers on site. The implementation of real-time sensor data-driven monitoring tools can greatly benefit the construction industry by enabling the early identification and prevention of potential construction accidents. This study aims to explore the innovative method of prototype development regarding a safety monitoring system in the form of smart personal protective equipment (PPE) by taking advantage of the recent advances in wearable technology and cloud computing.

The proposed smart construction safety system has been meticulously crafted to seamlessly integrate with conventional safety gear, such as gloves and vests, to continuously monitor construction sites for potential hazards. This state-of-the-art system is primarily geared towards mitigating musculoskeletal disorders and preventing workers from inadvertently entering high-risk zones where falls or exposure to extreme temperatures could occur. The wearables were introduced through the proposed system in a non-intrusive manner where the safety vest and gloves were chosen as the base for the PPE as almost every construction worker would be required to wear them on site. Sensors were integrated into the PPE, and a smartphone application which is called SOTER was developed to view and interact with collected data. This study discusses the method and process of smart PPE system design and development process in software and hardware aspects.

This research study posits a smart system for PPE that utilises real-time sensor data collection to improve worksite safety and promote worker well-being. The study outlines the development process of a prototype that records crucial real-time data such as worker location, altitude, temperature and hand pressure while handling various construction objects. The collected data are automatically uploaded to a cloud service, allowing supervisors to monitor it through a user-friendly smartphone application. The worker tracking ability with the smart PPE can help to alleviate the identified issues by functioning as an active warning system to the construction safety management team. It is steadily evident that the proposed smart PPE system can be utilised by the respective industry practitioners to ensure the workers' safety and well-being at construction sites through monitoring of the workers with real-time sensor data.

The proposed smart PPE system assists in reducing the safety risks posed by hazardous environments as well as preventing a certain degree of musculoskeletal problems for workers. Ultimately, the current study unveils that the construction industry can utilise cloud computing services in conjunction with smart PPE to take advantage of the recent advances in novel technological avenues and bring construction safety management to a new level. The study significantly contributes to the prevailing knowledge of construction safety management in terms of applying sensor-based technologies in upskilling construction workers' safety in terms of real-time safety monitoring and safety knowledge sharing.

The purpose of this paper is to apply a 3D methodology to assess the heating hazard on transformer covers and present a practical tool to design amagnetic inserts arrangement.

A practical 3D methodology linking an electromagnetic analytical formulation with thermal finite element method is used for computation. Such methodology allows the evaluation of the temperature on metallic device elements heated by electromagnetic induction. This is a 3D problem which in the case of power transformers becomes especially difficult to apply due to the discretization requirement into the thin skin depth penetration compared to big machine dimensions.

From the numerical solution of the temperature field, decisions on dimensions and different amagnetic inserts arrangements can be taken to avoid hot spots on transformer covers.

Some parameters presented in the model as heat exchange coefficients and material properties are difficult to determine from formulae or from the literature. The accuracy of the results strongly depends on the proper identification of those parameters, which the authors adjust based on measurements.

Differing from previous works found in the literature, which focus their results in power loss computation methods, this paper evaluates losses in terms of temperature distribution, which is easier to measure and validate over transformer covers. Moreover, an experimental work is presented where the temperature distribution is measured over a steel cover plate and a cover plate with amagnetic insert.

This study aims to investigate the potential impacts of rapid prototyping systems on the health and safety of operators and the environment, a growing concern given its wide-spread use in industry and academia.

Materials, processing and equipment features were used to identify potential health and safety risks and hazards, as well as environmental effects.

The study concludes with a “best practices” guide for rapid prototyping laboratories and service bureaus.

A thorough literature search revealed that Stephen M. Deak, the Rapid Prototyping Department Manager at Hasbro Inc., is the pioneer of the safety and health concerns in the rapid prototyping area. He is the only person to publish papers in this field in addition to these authors’ recent publications. His papers focused on the rapid prototyping laboratory safety guidelines and safe work practices in the rapid prototyping area.

This paper aims to present phenomenological extensions and technical improvements of a recent research path on a potential operational scheme aiming at promoting an effective disasters risk reduction of built urban areas, namely, the proposal of a Certification of the Predisposition of Resistance of Edifices to Disasters.

The authors illustrate new steps of a multidisciplinary research conducted by merging different fields of study, such as disaster risk analysis, sustainable land use and urban planning, environmental assessment methods, different buildings safety topics and certification and auditing management systems tools.

This work is based on research developed in Italy by carrying out new tests in the coastal regions of Liguria and Tuscany to validate improvements and to confirm in different territories the assessment process of most significant natural and man-made hazards already included in the certification scheme previously developed on the basis of the continental regions of Lombardy and Piedmont.

Investigations and results give firmer foundations and exploitability to a certification such as the one presented here.

Responding to emergency incidents by emergency response organizations such as fire, ambulance and police during large disaster and emergency events is very important. The purpose of this paper is to provide some insights into response patterns during the 2013 ice storm in the city of Vaughan, Ontario, Canada, using temporal and spatial analyses.

The City of Vaughan Fire and Rescue Service data set containing all responses to fire and other emergency incidents from January 1, 2009 to December 31, 2016 was used. The 2013 Southern Ontario ice storm occurred from December 20, 2013 to January 1, 2014, and, for this study, December 20–31 is considered the “study period.” Temporal, spatial and spatiotemporal analyses of responses during the study period are carried out and are compared with the same period in other years (2009–2012 and 2014–2016).

The findings show that temporal patterns of response attributes changed significantly during the 2013 ice storm. Similarly, the spatial pattern of responses during the 2013 ice storm showed some major differences with other years. The spatiotemporal analyses also demonstrate significant variations in responses in the city during different hours of the day in the ice storm days.

This study is the first study to examine the spatiotemporal patterns of responses made by a fire department during the 2013 ice storm in Canada. It provides some insights into the differences between response volumes, temporal and spatial distributions during large emergency events (e.g. ice storm) and normal situations. The results will help in mitigating the number of responses in the future through public education and technological changes. Moreover, the results will provide fire departments with information that could help them prepare for such events by possible reallocation of resources.

The case, briefly reported in the last issue of BFJ, an appeal to a Milk and Dairies Tribunal arising out of a local authority's refusal to grant a licence to a milk distributor because he failed to comply with a requirement that he should provide protective curtains to his milk floats, was a rare and in many ways, an interesting event. The Tribunal in this case was set up under reg. 16(2) (f), Milk (Special Designation) Regulations, 1963, constituted in accordance with Part I, clause 2 (2), Schedule 4 of the Regulations. Part II outlines procedure for such tribunals. The Tribunal is similar to that authorized by S.30, Food and Drugs Act, 1955, which deals with the registration of dairymen, dairy farms and farmers, and the Milk and Dairies (General) Regulations, 1959. Part II, Schedule 2 of the Act provided for reference to a tribunal of appeals against refusal or cancellation of registration by the Ministry, but of producers only. A local authority's power to refuse to register or cancellation contained in Part I, Schedule 2 provided for no such reference and related to instances where “public health is or is likely to be endangered by any act or default” of such a person, who was given the right of appeal against refusal to register, etc., to a magistrates' court. No such limitation exists in respect of the revoking, suspending, refusal to renew a licence under the Milk (Special Designation) Regulations, 1963; an appeal against same lies to the Minister, who must refer the matter to a tribunal, if the person so requests. This occurred in the case under discussion.

A re‐opening of negotiations for Britain, either unilaterally or with other States, to enter the European Economic Community appears distinctly likely in the coming year. It is more than four years since we discussed, in these columns, the subject of the Common Market and its possible effects on food standards and legislation generally, if Britain linked its economic fortunes and future with the Community. The main obstacles at the time were a chariness to accept the full implications of the Treaty of Rome and the agricultural policy of France. In fact, one gained the impression from all the reports that but for the intransigence of France, we might have joined in 1963.

The purpose of this paper is to investigate the functionality and main results of the ImmoRisk tool. The aim of the project of the Federal Ministry for Transport, Building and Urban Development (BMVBS), in corporation with the Federal Institute for Research on Building, Urban Affairs and Spatial Development (BBSR), was to develop a user-friendly tool that provides a sound basis with respect to the risk situation caused by extreme weather events.

The tool calculates the annual expected losses (AEL) for different types of extreme weather hazard and the damage rate as the proportion of AEL on building value, based on a trinomial approach: natural hazard, vulnerability and the value of the property.

The paper provides property-specific risk profiles of both the present and future risk situation caused by various extreme weather events.

The approach described in the paper can serve as a model for the realization of subsequent tools in further countries bound with other climatic risks.

The real estate industry is affected by a significant rise in monetary damages caused by extreme weather events. Accordingly, the approach is suitable for implementation in the companies’ real estate risk management systems.

The tool offers homeowners a profound basis for investment decisions with regard to adaptation measures.

The approach pioneers fourfold: first, by meeting the needs of the housing and real estate industry based on a trinomial approach; second, by using a property-specific bottom-up approach; third, by offering both a comprehensive risk assessment of the hazards storms, flood and hailstorm and finally, by providing results with respect to the future climatic risk situation.

The purpose of this study is to determine the effect of ventilation openings and fire intensity on heat transfer and fluid flow within the microclimate between 3D human body and clothing.

On account of interaction effects of fire and ventilation openings on heat transfer process, a 3D transient computational fluid dynamics model considering the real shape of human body and clothing was developed. The model was validated by comparing heat flux history and distribution with experimental results. Heat transfer modes and fluid flow were investigated under three levels of fire intensity for the microclimate with ventilation openings and closures.

Temperature distribution on skin surface with open microclimate was heavily depended on the heat transfer through ventilation openings. Higher temperature for the clothing with confined microclimate was affected by the position and direction of flames injection. The presence of openings contributed to the greater velocity at forearms, shanks and around neck, which enhanced the convective heat transfer within microclimate. Thermal radiation was the dominant heat transfer mode within the microclimate for garment with closures. On the contrary, convective heat transfer within microclimate for clothing with openings cannot be neglected.

The findings provided fundamental supports for the ease and pattern design of the improved thermal protective systems, so as to realize the optimal thermal insulation of the microclimate on the garment level in the future.

The outcomes broaden the insights of results obtained from the mesoscale models. Different high skin temperature distribution and heat transfer modes caused by thermal environment and clothing structure provide basis for advanced thermal protective clothing design.