Search results

1 – 10 of 141
Article
Publication date: 10 December 2019

Muhammad Ijaz Khan, Sohail Ahmad Khan, Tasawar Hayat, Muhammad Waqas and Ahmed Alsaedi

The purpose of this paper is to investigate the entropy optimization in magnetohydrodynamic hybrid nanomaterials flows toward a stretchable surface. The energy expression is…

Abstract

Purpose

The purpose of this paper is to investigate the entropy optimization in magnetohydrodynamic hybrid nanomaterials flows toward a stretchable surface. The energy expression is modeled subject to dissipation, heat generation/absorption and Joule heating. Here silicon dioxide (SiO2) and molybdenum disulfide (MoS2) as nanoparticles and propylene glycol (C3H8O2) as base fluid, respectively. Furthermore, the authors discussed the comparative study of molybdenum disulfide and silicon dioxide diluted in propylene glycol. The total entropy optimization rate is computed through implementation of the second law of thermodynamics.

Design/methodology/approach

The nonlinear partial differential system is reduced to an ordinary one through implementation of transformation. Newton built-in shooting method is used for computational results for the given system. Influences of various flow variables on the temperature, Bejan number, velocity, concentration and entropy generation rate are examined graphically for both nanoparticles (SiO2 and MoS2). Gradients of velocity and temperature are computed numerically for various physical parameters. Also, take the comparison between the present and previously published results in tabulated form.

Findings

For higher estimation of ϕ both temperature and velocity are enhanced. Entropy optimization and Bejan number have the opposite outcome for viscosity parameter. Temperature and velocity have opposite behaviors for larger values of magnetic parameter. Molybdenum disulfide (MoS2) is more efficient than silicon dioxide (SiO2).

Originality/value

No such work is yet published in the literature.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 30 no. 8
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 24 September 2019

Sumaira Qayyum, Muhammad Ijaz Khan, Tasawar Hayat and Ahmed Alsaedi

The purpose of this study is to analyze the Entropy generation analysis and heat transport in three-dimensional flow between two stretchable disks. Joule heating and heat

Abstract

Purpose

The purpose of this study is to analyze the Entropy generation analysis and heat transport in three-dimensional flow between two stretchable disks. Joule heating and heat generation/absorption are incorporated in the thermal equation. Thermo-diffusion effect is also considered. Flow is conducting for time-dependent applied magnetic field. Induced magnetic field is not taken into consideration. Velocity and thermal slip conditions at both the disks are implemented. The flow problem is modeled by using Navier–Stokes equations with entropy generation rate and Bejan number.

Design/methodology/approach

Von Karman transformations are used to reduce the nonlinear governing expressions into an ordinary one and then tackled by homotopy analysis method for convergent series solutions. The nonlinear expressions for total entropy generation rate are obtained with appropriate transformations. The impacts of different flow variables on velocity, temperature, entropy generation rate and Bejan number are described graphically. Velocity, temperature and concentration gradients are discussed in the presence of flow variables.

Findings

Axial, radial and tangential velocity profiles show decreasing trend for larger values of velocity slip parameters. For a larger Brinkman number, the entropy generation increases, while a decreasing trend is noticed for Bejan number.

Originality/value

To the best of the authors’ knowledge, no such analyses have been reported in the literature.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 29 no. 10
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 6 December 2020

S. Das, Akram Ali and R.N. Jana

In this communication, a theoretical simulation is aimed to characterize the Darcy–Forchheimer flow of a magneto-couple stress fluid over an inclined exponentially stretching…

Abstract

Purpose

In this communication, a theoretical simulation is aimed to characterize the Darcy–Forchheimer flow of a magneto-couple stress fluid over an inclined exponentially stretching sheet. Stokes’ couple stress model is deployed to simulate non-Newtonian microstructural characteristics. Two different kinds of thermal boundary conditions, namely, the prescribed exponential order surface temperature (PEST) and prescribed exponential order heat flux, are considered in the heat transfer analysis. Joule heating (Ohmic dissipation), viscous dissipation and heat source/sink impacts are also included in the energy equation because these phenomena arise frequently in magnetic materials processing.

Design/methodology/approach

The governing partial differential equations are transformed into nonlinear ordinary differential equations (ODEs) by adopting suitable similar transformations. The resulting system of nonlinear ODEs is tackled numerically by using the Runge–Kutta fourth (RK4)-order numerical integration scheme based on the shooting technique. The impacts of sundry parameters on stream function, velocity and temperature profiles are viewed with the help of graphical illustrations. For engineering interests, the physical implication of the said parameters on skin friction coefficient, Nussult number and surface temperature are discussed numerically through tables.

Findings

As a key outcome, it is noted that the augmented Chandrasekhar number, porosity parameter and Forchhemeir parameter diminish the stream function as well as the velocity profile. The behavior of the Darcian drag force is similar to the magnetic field on fluid flow. Temperature profiles are generally upsurged with the greater magnetic field, couple stress parameter and porosity parameter, and are consistently higher for the PEST case.

Practical implications

The findings obtained from this analysis can be applied in magnetic material processing, metallurgy, casting, filtration of liquid metals, gas-cleaning filtration, cooling of metallic sheets, petroleum industries, geothermal operations, boundary layer resistors in aerodynamics, etc.

Originality/value

From the literature review, it has been found that the Darcy–Forchheimer flow of a magneto-couple stress fluid over an inclined exponentially stretching surface with heat flux conditions is still scarce. The numerical data of the present results are validated with the already existing studies under limited cases and inferred to have good concord.

Details

World Journal of Engineering, vol. 18 no. 2
Type: Research Article
ISSN: 1708-5284

Keywords

Article
Publication date: 2 April 2019

S.S. Ghadikolaei, Kh. Hosseinzadeh and D.D. Ganji

The purpose of this study is, mixed convection on magnetohydrodynamic (MHD) flow of Eyring–Powell nanofluid over a stretching cylindrical surface in the presence of thermal…

Abstract

Purpose

The purpose of this study is, mixed convection on magnetohydrodynamic (MHD) flow of Eyring–Powell nanofluid over a stretching cylindrical surface in the presence of thermal radiation, chemical reaction, heat generation and Joule heating effect is investigated and analyzed. The Brownian motion and thermophoresis phenomenon are used to model nanoparticles (Buongiorno’s model).

Design/methodology/approach

The numerical method is applied to solve the governing equations. Obtained results from the effects of different parameters changes on velocity, temperature and concentration profiles are reported as diagrams.

Findings

As a result, velocity profile has been reduced by increasing the Hartman number (magnetic field parameter) because of the existence of Lorentz force and increasing Eyring–Powell fluid parameter. In addition, the nanoparticle concentration profile has been reduced because of increase in chemical reaction parameter. At the end, the effects of different parameters on skin friction coefficient and local Nusselt number are investigated.

Originality/value

Eyring–Powell nanofluid and MHD have significant influence on flow profile.

Details

World Journal of Engineering, vol. 16 no. 1
Type: Research Article
ISSN: 1708-5284

Keywords

Article
Publication date: 23 October 2020

Muhammad Waqas, Ubaid Ahmed Nisar, Muhammad Ijaz Khan and Sabir Ali Shehzad

The purpose of this paper is to address the impact of gravity induced stretching flow of second grade liquid subject to thermal radiation. The flow is generated by the stretching…

68

Abstract

Purpose

The purpose of this paper is to address the impact of gravity induced stretching flow of second grade liquid subject to thermal radiation. The flow is generated by the stretching of an impermeable cylinder. Stagnation point flow is considered. Convective type boundary conditions are applied on temperature and concentration. The present investigation further includes the aspects of magnetohydrodynamics, Joule heating, chemical reaction and viscous dissipation and heat generation/absorption.

Design/methodology/approach

The ordinary differential expressions are formed using suitable similarity transformations from the governing partial differential expressions. The subsequent nonlinear ordinary differential expressions are solved analytically using homotopy concept to report the consequences of different dimensionless physical parameters in graphical and tabular forms.

Findings

The results witnessed that increasing values of curvature parameter corresponds to higher temperature and concentration. Besides this, the impacts of destructive and constructive chemical processes on the concentration distribution are noted opposite.

Originality/

No such analysis has yet been reported.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 31 no. 4
Type: Research Article
ISSN: 0961-5539

Keywords

Article
Publication date: 29 November 2018

Jayarami Reddy Konda, Madhusudhana Reddy N.P., Ramakrishna Konijeti and Abhishek Dasore

The purpose of this paper is to examine the influence of magnetic field on Williamson nanofluid embedded in a porous medium in the presence of non-uniform heat source/sink…

Abstract

Purpose

The purpose of this paper is to examine the influence of magnetic field on Williamson nanofluid embedded in a porous medium in the presence of non-uniform heat source/sink, chemical reaction and thermal radiation effects.

Design/methodology/approach

The governing physical problem is presented using the traditional Navier–Stokes theory. Consequential system of equations is transformed into a set of non-linear ordinary differential equations by means of scaling group of transformation, which are solved using the Runge–Kutta–Fehlberg method.

Findings

The working fluid is examined for several sundry parameters graphically and in a tabular form. It is noticed that with an increase in Eckert number, there is an increase in velocity and temperature along with a decrease in shear stress and heat transfer rate.

Originality/value

A good agreement of the present results has been observed by comparing with the existing literature results.

Details

Multidiscipline Modeling in Materials and Structures, vol. 15 no. 2
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 24 September 2019

Himanshu Upreti and Manoj Kumar

The purpose of this paper is to examine the effect of non-linear thermal radiation, Joule heating and viscous dissipation on the mixed convection boundary layer flow of MHD…

Abstract

Purpose

The purpose of this paper is to examine the effect of non-linear thermal radiation, Joule heating and viscous dissipation on the mixed convection boundary layer flow of MHD nanofluid flow over a thin moving needle.

Design/methodology/approach

The equations directing the flow are reduced into ODEs by implementing similarity transformation. The Runge–Kutta–Fehlberg method with a shooting technique was implemented.

Findings

Numerical outcomes for the coefficient of skin friction and the rate of heat transfer are tabulated and discussed. Also, the boundary layer thicknesses for flow and temperature fields are addressed with the aid of graphs.

Originality/value

Till now, no numerical study investigated the combined influence of Joule heating, non-linear thermal radiation and viscous dissipation on the mixed convective MHD flow of silver-water nanofluid flow past a thin moving needle. The numerical results for existing work are new and their novelty verified by comparing them with the work published earlier.

Details

Multidiscipline Modeling in Materials and Structures, vol. 16 no. 1
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 22 December 2020

Saima Batool, Muhammad Nawaz and Mohammed Kbiri Alaoui

This study presents a mathematical approach and model that can be useful to investigate the thermal performance of fluids with microstructures via hybrid nanoparticles in…

Abstract

Purpose

This study presents a mathematical approach and model that can be useful to investigate the thermal performance of fluids with microstructures via hybrid nanoparticles in conventional fluid. It has been found from the extensive literature survey that no study has been conducted to investigate buoyancy effects on the flow of Maxwell fluid comprised of hybrid microstructures and heat generation aspects through the non-Fourier heat flux model.

Design/methodology/approach

Non-Fourier heat flux model and non-Newtonian stress–strain rheology with momentum and thermal relaxation phenomena are used to model the transport of heat and momentum in viscoelastic fluid over convectively heated surface. The role of suspension of mono and hybrid nanostructures on an increase in the thermal efficiency of fluid is being used as a medium for transportation of heat energy. The governing mathematical problems with thermo-physical correlations are solved via shooting method.

Findings

It is noted from the simulations that rate of heat transfer is much faster in hybrid nanofluid as compare to simple nanofluid with the increasing heat-generation coefficient. Additionally, an increment in the thermal relaxation time leads to decrement in the reduced skin friction coefficient; however, strong behavior of Nusselt number is shown when thermal relaxation time becomes larger for hybrid nanofluid as well as simple nanofluid.

Originality/value

According to the literature survey, no investigation has been made on buoyancy effects of Maxwell fluid flow with hybrid microstructures and heat generation aspects through non-Fourier heat flux model. The authors confirm that this work is original, and it has neither been published elsewhere nor is it currently under consideration for publication elsewhere.

Details

Multidiscipline Modeling in Materials and Structures, vol. 17 no. 3
Type: Research Article
ISSN: 1573-6105

Keywords

Article
Publication date: 9 December 2020

S. Das, S. Sarkar and R.N. Jana

To amend the efficiency of engineering processes and electronic devices, it is very urgent to assess the irreversibility in the term entropy generation (EG). The efficiency of…

Abstract

Purpose

To amend the efficiency of engineering processes and electronic devices, it is very urgent to assess the irreversibility in the term entropy generation (EG). The efficiency of energy transportation in a system can be improved by minimization of the rate of EG. In this context, the aim of the present study is to estimate irreversible losses of an unsteady magnetohydrodynamic (MHD) flow of a viscous incompressible electrically conducting non-Newtonian molybdenum disulfide-polyethylene glycol Casson nanofluid past a moving vertical plate with slip condition under the influence of Hall current, thermal radiation, internal heat generation/absorption and first-order chemical reaction. Molybdenum disulfide (MoS2) nanoparticles are dispersed in the base fluid polyethylene glycol (PEG) to make Casson nanofluid. Casson fluid model is considered to characterize the rheology of the non-Newtonian fluid, whereas Rosseland approximation is adopted to simulate the thermal radiative heat flux in the energy equation.

Design/methodology/approach

The closed-form solutions are obtained for the model equations by using the Laplace transform method (LTM). Graphs and tables are prepared to examine the impact of pertinent flow parameters on the pertinent flow characteristics. The energy efficiency of the system via the Bejan number is studied extensively.

Findings

Analysis reveals that Hall current has diminishing behavior on entropy production of the thermal system. Strengthening of the magnetic field declines the velocity components and prop-ups the rate of EG. Adding nanoparticles into the base fluid reduces the EG, whereas there are an optimum volume fraction of nanoparticles for which the EG is minimized. Further, the rate of decay of EG is prominent in molybdenum disulfide-polyethylene glycol in comparison to PEG.

Practical implications

The results of this study would benefit the industrial sector in achieving the maximum heat transfer at the cost of minimum irreversibilities with an optimal choice of embedded thermophysical parameters. In view of this agenda, this study would be adjuvant in powder technology, polymer dynamics, metallurgical process, manufacturing dynamics of nano-polymers, petroleum industries, chemical industries, magnetic field control of material processing, synthesis of smart polymers, etc.

Originality/value

The novelty of this study is to encompass the analytical solution by using the LTM. Such an exact solution of non-Newtonian fluid flow is rare in the literature. Limited research articles are available in the field of EG analysis during the flow of non-Newtonian nanoliquid subject to a strong magnetic field.

Article
Publication date: 6 February 2017

S. Sivasankaran, H. Niranjan and M. Bhuvaneswari

The purpose of this paper is to investigate the Newtonian heating and slip effect on mixed convective flow near a stagnation point in a porous medium with thermal radiation in the…

Abstract

Purpose

The purpose of this paper is to investigate the Newtonian heating and slip effect on mixed convective flow near a stagnation point in a porous medium with thermal radiation in the presence of magnetohydrodynamic (MHD), heat generation/absorption and chemical reaction.

Design/methodology/approach

The governing nonlinear coupled equations are converted into ordinary differential equations by similarity transformation. These equations are solved numerically using a Runge–Kutta–Fehlberg method with shooting technique and analytically using the homotopy analysis method (HAM).

Findings

The effects of different parameters on the fluid flow and heat transfer are investigated. It is found that the velocity and temperature profiles increase on an increase in the Biot number. The velocity and concentration profiles increase on decreasing the chemical reaction parameter.

Practical implications

This paper is helpful to the engineers and scientists in the field of thermal and manufacturing engineering.

Originality/value

The two-dimensional boundary layer flow over a vertical plate with slip and convective boundary conditions near the stagnation-point is analysed in the presence of magnetic field, radiation and heat generation/absorption. This paper is helpful to the engineers and scientists in the field of thermal and manufacturing engineering.

Details

International Journal of Numerical Methods for Heat & Fluid Flow, vol. 27 no. 2
Type: Research Article
ISSN: 0961-5539

Keywords

1 – 10 of 141