Search results

Multiple attribute decision making (MADM) is a conceptual agenda used for evaluation and selection of optimal nanofluid to assure best performance of heat exchanger. Most of the studies focus on nanofluids focus on individual ability at one time. Relatively, not even a single study is available for selection of nanofluid for heat exchanger using concurrent design and MADM approach. The purpose of this paper is to propose a concurrent design methodology using MADM approach to assist improved design of heat exchanger concurrently for all the x-abilities in an integrated manner.

A combined methodology of applying MADM approach using concurrent design for x-abilities is called CE-MADM approach. Implementation of nanofluid to improve thermal performance of heat exchanger entails thorough evaluation of nanofluids in various x-abilities (performance, maintenance, thermophysical properties and modelisation) to make exhaustive management decision. Sensitivity analysis is also proposed to study the behaviour of height of variation of density, heat capacity, thermal expansion and thermal conductivity with varying particle volume fraction and variation of relative closeness of available alternates from ideally best possible solution.

MADM approach considering various x-abilities concurrently provide an approach for relative ranking of available nanofluids for optimum performance. Fishbone diagrams of all x-abilities are constructed to identify all the attributes and converge large number of attributes into single numerical index that are concurrently responsible for the cause thus saving time for easy evaluation, comparison and ranking by decision makers. Sensitivity analysis to demonstration height of variation of pertinent attributes with varying particle volume fraction. A MATLAB programming is established to execute calculations involved in the procedure.

This paper comprises a predictable and effective mathematical approach to improve design of heat exchanger with nanofluid bearing in mind all the required x-abilities concurrently. This combined approach of CE-MADM is never applied before in the field of nanofluid to predict best possible results in feasible conditions considering all the x-abilities. Sensitivity analysis is also presented from the assumed mathematical equations of thermophysical properties.

The purpose of this paper is to present a novel and applied method for optimum designing of plate-finned heat exchanger network. Considering the total annual cost as the objective function, a network of plate-finned heat exchanger is designed and optimized.

Accurate evaluation of plate-finned heat exchanger networks depends on different fin types with 10 different geometrical parameters of heat exchangers. In this study, fin numbers are considered as the main decision variables and geometrical parameters of fins are considered as the secondary decision variables. The algorithm applies heat transfer and pressure drop coefficients correction method and differential evolution (DE) algorithm to obtain the optimum results. In this paper, optimization and minimization of the total annual cost of heat exchanger network is considered as the objective function.

In this study, a novel and applied method for optimum designing of plate-finned heat exchanger network is presented. The comprehensive algorithm is applied into a case study and the results are obtained for both counter-flow and cross-flow plate-finned heat exchangers. The total annual cost and total area of the network with counter-flow heat exchangers were 12.5% and 23.27%, respectively, smaller than the corresponding values of the network with cross-flow heat exchanger.

In this paper, a reliable method is used to design, optimize parameters and the economic optimization of heat exchanger network. Taking into account the importance of plate-finned heat exchangers in industrial applications and the complexity in their geometry, the DE methodology is adopted to obtain an optimal geometric configuration. The total annual cost is chosen as the objective function. Applying this technique to a case study illustrates its capability to accurate design plate-finned heat exchangers to improve the objective function of the heat exchanger network from the economic viewpoint with the design of details.

To study the thermal performance of both co‐current and counter‐current parallel flow heat exchangers. The hot stream is assumed to flow in the middle of two cold streams and exchange heat with them.

The dimensionless governing equations are derived based on the conservation of energy principle and solved using FEM based on subdomain collocation method and Galerkin's method. The results show that the subdomain collocation method is more accurate than the Galerkin's method, as observed when the results obtained are compared with the analytical results for the classical two‐fluid heat exchangers.

The results are presented in terms of effectiveness and number of transfer units (Ntu) for different values of the governing parameters. The governing parameters are the Ntu, the heat capacity ratios, the overall heat transfer coefficient ratio, and the inlet temperatures parameter. The results show that the effectiveness of the three‐fluid heat exchanger is always higher than that of classical two‐fluid flow heat exchanger for fixed values of the governing parameters. The results also show that for fixed values of the governing parameters, the effectiveness of the counter‐current is higher than the co‐current parallel flow three‐fluid heat exchangers.

One‐dimensional governing equations are derived based on the conservation of energy principle. The ranges of the governing parameters are: Ntu (0:5), the heat capacity ratios (0:1,000), the overall heat transfer coefficient ratio (0:2), and the inlet temperatures parameter (0:1).

Both co‐current and counter‐current parallel flow heat exchangers are used in the thermal engineering applications. The design and performance analysis of these heat exchangers are of practical importance.

This paper provides the details of the performance analysis of co‐current and counter‐current parallel flow heat exchangers, which can be used in thermal design.

Heat exchangers are devices for exchanging energy between two or more fluids. They find applications in various industries like power, process, electronics, refining, cryogenics, chemicals, metals and manufacturing sector. Even though heat exchanger designs have been reported quite extensively, they are generally limited to steady‐state performance, single phase fluids, a few of the many possible flow arrangements and only two fluid heat exchangers. While these designs encompass the majority of the heat exchanger applications, there are some designs, which involve several fluids such as in cryogenics or fault‐tolerant heat exchangers. The governing differential equations for a three‐fluid heat exchanger are written based on the conservation of energy. The finite element method is used to solve the governing differential equations along with the appropriate boundary conditions. The case of a Buoyonet heat exchanger (used for pasteurizing milk) is analysed and the results are compared with the analytical solution available in the literature. The Buoyonet heat exchanger, treated as a three‐fluid heat exchanger is also analysed. The effect of heat loss to the ambient from a parallel flow double pipe heat exchanger is also investigated and the results are compared with those available in the literature. The results are presented both in terms of the temperature distribution along the length of the heat exchanger and the variation of effectiveness with NTU. The methodology presented in this paper can be extended to heat exchangers with any number of streams and any combination of the flow arrangements.

The purpose of this study is to provide a method for designing the shell and tube heat exchangers and examine the total annual cost of heat exchanger networks from the economic view based on the careful design of equipment.

Accurate evaluation of heat exchanger networks performance depends on detailed models of heat exchangers design. The simulations variables include nine design variables such as flow direction determination of each of the two fluids, number of tubes, number of tube passes, length of tubes, the arrangement of tubes, size and percentage of baffle cut, tube diameter and tube pitch. The optimal designing of the heat exchangers is based on geometrical and hydraulic modeling and using a hybrid genetic particle swarm optimization algorithm (PSO-GA) technique. In this paper, optimization and minimization of the total annual cost of heat exchanger networks are considered as the objective function.

In this study, a fast and reliable method is used to simulate, optimize design parameters and evaluate heat transfer enhancement. PSO-GA algorithms have been used to minimize the total annual cost, which includes investment costs of heat exchangers and pumps, operating costs (pumping) and energy costs for utilities. Three case studies of four, six and nine streams are selected to demonstrate the accuracy of the method. Reductions of 0.55%, 23.5% and 14.78% are obtained in total annual cost for the selected streams, respectively.

In the present study, a reliable method is used to simulate and optimize design parameters and the economic optimization of the heat exchanger networks. Taking into account the importance of shell and tube heat exchangers in industrial applications and the complexity in their geometry, the PSO-GA methodology is adopted to obtain an optimal geometric configuration. The total annual cost is chosen as the objective function. Applying this technique to case studies demonstrates its ability to accurately design heat exchangers to optimize the objective function of the heat exchanger networks by giving the detail of design.

This paper aims to examine total annual cost from economic view mixed materials heat exchangers based on three optimization algorithms. This study compares the use of three optimization algorithms in the design of economic optimization shell and tube mixed material heat exchangers.

A shell and tube mixed materials heat exchanger optimization design approach is expanded based on the total annual cost measured by dividing the costs of the heat exchanger to area of surface and power consumption. In this study, optimization and minimization of the total annual cost is considered as the objective function. There are three types of exchangers: cheap, expensive and mixed. Mixed materials are used in corrosive flows in the heat exchanger network. The present study explores the use of three optimization techniques, namely, hybrid genetic-particle swarm optimization, shuffled frog leaping algorithm techniques and ant colony optimization.

There are three parameters as decision variables such as tube outer diameter, shell diameter and central baffle spacing considered for optimization. Results have been compared with the findings of previous studies to demonstrate the accuracy of algorithms.

The present study explores the use of three optimization techniques, namely, hybrid genetic-particle swarm optimization, shuffled frog leaping algorithm techniques and ant colony optimization. This study has demonstrated successful application of each technique for the optimal design of a mixed material shell and tube heat exchanger from the economic view point.

In this paper three‐dimensional numerical simulations were conducted for the periodically developed laminar flow in the sinusoid wavy fin‐and‐tube heat exchanger.

A novel CLEARER algorithm is adopted to guarantee the fully coupling between the pressure and velocity, and it can not only speed up the convergence rate, but also overcome the severe grid non‐orthogonality in the wavy fin‐and‐tube heat exchanger. The influence of wave amplitude, fin pitch, tube diameter and wave density on fluid flow and heat transfer characteristics is analyzed under different Reynolds numbers.

The numerical results show that with the increase of wave amplitude, tube diameter or wave density, both the friction factor and Nusselt number will increase, and the increase rate of friction factor is higher than that of Nusselt number. It is interesting to note that, at low Reynolds numbers the Nusselt number increases with the decrease of fin pitch, while at high Reynolds numbers, the Nusselt number increases with the increase of fin pitch.

The numerical results presented in this paper may provide some useful guidance in the design of the wavy fin‐and‐tube heat exchanger with large number of rows of tubes.

The knowledge of the heat transfer coefficient is important for the proper design of heat exchangers as well as for the determination of the working medium outlet temperatures. This paper aims to present a method of simultaneous determination of coefficients in correlation formulas for the Nusselt number on both sides of the heat transfer surface.

The idea of the developed method is based on determining such a values of the coefficients in Nusselt number correlations that fulfill the condition of equality between the measured and calculated temperature at the outlet of heat exchanger in terms of least squares method. To test the proposed method, a special experimental installation was built. The heat transfer in helically coiled tube-in-tube heat exchanger was examined for the wide range of temperature changes and volumetric flow rates of working fluid.

The simulation results were validated with an experimental data. The results show that the heat transfer coefficient of the counter-current is higher than the co-current flow in helically coiled heat exchanger. This phenomenon can be beneficial particularly in the laminar flow regime.

The correlation for the Nusselt number as a function of the Reynolds and Prandtl numbers for hot and cold liquid was obtained with the least squares method for the experimental data.

The presented method allows for the simultaneous determination of heat transfer coefficient on both sides of the wall without the necessity of indirect calculation of the overall heat transfer coefficient. The presented method can be used in the thermal design of various type heat exchangers.

This work presents the new methodology of determination correlations for the helically coiled tube-in-tube heat exchanger for co-current and counter-current arrangement, which can be used in thermal design.

The purpose of this study is to numerically and experimentally survey the thermal efficiency of a block-type heat exchanger operated in different working conditions by using pure water and two nanofluids as heat transfer fluids.

An aluminum block-type heat exchanger integrated with Peltier thermoelectric element was designed and installed to operate in a cycle, and the thermal performance of the heat exchanger, heat transfer rate, Nusselt and heat transfer coefficient variations were examined at different bath water temperatures by using recycled nanofluids. New generation surface-modified Fe₃O₄@SiO₂-mix-(CH₂)₃Cl@Imidazol/water nanofluid was used as heat transfer fluid in the cycle. In addition, CFD simulation was performed using ANSYS/Fluent to investigate the temperature distribution and fluid flow structure in the used heat exchanger.

Experiments were carried out by using numerical and experimental methods. In the experiments, the operating conditions such as flow rate, volume fraction of the nanofluid and water bath temperature were changed to find the effect of each parameter on the thermal efficiency. The Reynolds number varied depending on the test conditions, which was calculated in the range of approximately 100 < Re < 350. In addition, Nusselt number and heat transfer coefficient of test fluids were very close to each other. For 0.4% nanofluid, the maximum h value was obtained as 3837.1, when the Reynolds number was measured as 314.4.

In the scientific articles published in the field of heat exchangers operated by nanofluids, little attention has been paid to the stability of the nanofluids and sedimentation of particles in the base fluids. In addition, in most cases, experiments were implemented using an electrical resistance as a heat source. In this research, stable surface-modified nanofluids were used as heat transfer fluids, and it was found that the Peltier thermoelectric can be used as heat sources with acceptable efficiency in flat-type heat exchangers and even non-circular channels.

Heat exchangers working in cryogenic temperature ranges are strongly affected by heat ingression from the ambient. This paper aims to investigate the effect of ambient heat-in-leak on the performance of a three-fluid cross-flow cryogenic heat exchanger.

The governing equations are derived for a three-fluid cross-flow cryogenic heat exchanger based on the conservation of energy principle. For given fluid inlet temperatures, the governing equations are solved using the finite element method to obtain exit temperatures of the three-fluid exchanger. The performance of the heat exchanger is determined using effectiveness-number of transfer units (e-NTU) method. In the present analysis, the amount of ambient heat-in-leak to the heat exchanger is accounted by two parameters H_t and H_b. The variation of the heat exchanger effectiveness due to ambient heat-in-leak is analyzed for various non-dimensional parameters defined to study the heat exchanger performance.

The effect of ambient heat in leak to the heat exchanger from the surrounding is to increase the dimensionless exit mean temperature of all three fluids. An increase in heat in leak parameter (H_t = H_b) value from 0 to 0.1 reduces hot fluid effectiveness by 32 per cent for an NTU value of 10.

The effect of heat-in-leak on a three-fluid cross-flow cryogenic heat exchanger is significant, but so far, no investigations are carried out. The results establish the efficacy of the method and throw light on important considerations involved in the design of such heat exchangers.