Search results

This paper aims to investigate the hydrodynamic instability properties of a mixed convection flow of nanofluid in a porous channel.

The treated single-phase nanofluid is a suspension consisting of water as the working fluid and alumina as a nanoparticle. The anisotropy of the porous medium and the effects of the inclination of the magnetic field are highlighted. The effects of viscous dissipation and thermal radiation are incorporated into the energy equation. The eigenvalue equation system resulting from the stability analysis is processed numerically by the spectral collocation method.

Analysis of the results in terms of growth rate reveals that increasing the volume fraction of nanoparticles increases the critical Reynolds number. Parameters such as the mechanical anisotropy parameter and Richardson number have a destabilizing effect. The Hartmann number, permeability parameter, magnetic field inclination, Prandtl number, wave number and thermal radiation parameter showed a stabilizing effect. The Eckert number has a negligible effect on the growth rate of the disturbances.

Linear stability analysis of Magnetohydrodynamics (MHD) mixed convection flow of a radiating nanofluid in porous channel in presence of viscous dissipation.

This paper aims to investigate the thermal performance of equivalent square and circular thermal systems and compare the heat transport and irreversibility of magnetohydrodynamic (MHD) nanofluid flow within these systems.

The research uses a constraint-based approach to analyze the impact of geometric shapes on heat transfer and irreversibility. Two equivalent systems, a square cavity and a circular cavity, are examined, considering identical heating/cooling lengths and fluid flow volume. The analysis includes parameters such as magnetic field strength, nanoparticle concentration and accompanying irreversibility.

This study reveals that circular geometry outperforms square geometry in terms of heat flow, fluid flow and heat transfer. The equivalent circular thermal system is more efficient, with heat transfer enhancements of approximately 17.7%. The corresponding irreversibility production rate is also higher, which is up to 17.6%. The total irreversibility production increases with Ra and decreases with a rise in Ha. However, the effect of magnetic field orientation (γ) on total EG is minor.

Further research can explore additional geometric shapes, orientations and boundary conditions to expand the understanding of thermal performance in different configurations. Experimental validation can also complement the numerical analysis presented in this study.

This research introduces a constraint-based approach for evaluating heat transport and irreversibility in MHD nanofluid flow within square and circular thermal systems. The comparison of equivalent geometries and the consideration of constraint-based analysis contribute to the originality and value of this work. The findings provide insights for designing optimal thermal systems and advancing MHD nanofluid flow control mechanisms, offering potential for improved efficiency in various applications.

Ohmic heating generates temperature with the help of electrical current and resists the flow of electricity. Also, it generates heat rapidly and uniformly in the liquid matrix. Electrically conducting biofluid flows with Ohmic heating have many biomedical and industrial applications. The purpose of this study is to provide the significance of the effects of Ohmic heating and viscous dissipation on electrically conducting Casson nanofluid flow driven by peristaltic pumping through a vertical porous channel.

In this analysis, the non-Newtonian properties of fluid will be characterized by the Casson fluid model. The long wavelength approach reduces the complexity of the governing system of coupled partial differential equations with non-linear components. Using a regular perturbation approach, the solutions for the flow quantities are established. The fascinating and essential characteristics of flow parameters such as the thermal Grashof number, nanoparticle Grashof number, magnetic parameter, Brinkmann number, permeability parameter, Reynolds number, Casson fluid parameter, thermophoresis parameter and Brownian movement parameter on the convective peristaltic pumping are presented and thoroughly addressed. Furthermore, the phenomenon of trapping is illustrated visually.

The findings indicate that intensifying the permeability and Casson fluid parameters boosts the temperature distribution. It is observed that the velocity profile is elevated by enhancing the thermal Grashof number and perturbation parameter, whereas it reduces as a function of the magnetic parameter and Reynolds number. Moreover, trapped bolus size upsurges for greater values of nanoparticle Grashof number and magnetic parameter.

There are some interesting studies in the literature to explain the nature of the peristaltic flow of non-Newtonian nanofluids under various assumptions. It is observed that there is no study in the literature as investigated in this paper.

The purpose of this paper to analyze the effect of Soret with heat and mass transfer on an unsteady two-dimensional Magnetohydrodynamics flow through a porous medium under the influence of the uniform transverse magnetic field in a rotating parallel plate is considered.

A mathematical model was developed using the slip conditions under unsteady state situations. Analytical expressions for the velocity, temperature and concentration profiles, wall shear stress, rates of heat and mass transfer and volumetric flow rate were obtained and computationally discussed with respect to the non-dimensional parameters. Further, the velocity reduces with increasing Hartmann number M and increases with Grashof number Gr and permeability parameter K.

It is observed that temperature reduces with an increase in Prandtl number Pr and ω. It is noted that the thermal radiation increases with increase in Soret number Sr, Schmidt number Sc, Prandtl number pr and ω.

Concentration decreases with an increase in radiation parameter R and chemical reaction parameter Kc.

The purpose of this study is to analyse the magnetic field effect on Fe₃O₄/H₂O Ferrofluid flowing in a sudden expansion tube, which has specific behaviour in terms of rheology, with convex dimple fins. Because the investigation of flow separation is a prominent application in performance, the effect of magnetic field and convex dimple on the thermo-hydraulic performance of sudden expansion tube are examined, in detail.

During the solution of the boundary conditions of the sudden expansion tube, finite volume method was used. Analyses have been conducted considering the single-phase solution, steady-state, incompressible fluid and no-slip condition of the wall under forced convection conditions. In the analyses, it has been assumed that the flow was developing thermally and has been fully developed hydrodynamically.

The present study focuses on exploring the influence of the magnetic field, nanofluid concentration and convex dimple fins on the thermo-hydraulic performance of sudden expansion tube. The results indicate that the strength of the magnetic field, nanofluid concentration and convex dimple fins have a positive effect on the convective heat transfer in the system.

The authors conducted numerical studies, determining through a literature search that no one had yet investigated enhancing heat transfer on a sudden expansion tube using combinations of magnetic fields, nanofluids and convex dimple fins. The results of the numerical analyses provide valuable information about the improvement of heat transfer and system performance in electronic device cooling and heat exchangers.

A novel type of heat transfer fluid known as hybrid nanofluids is used to improve the efficiency of heat exchangers. It is observed from literature evidence that hybrid nanofluids outperform single nanofluids in terms of thermal performance. This study aims to address the stagnation point flow induced by Williamson hybrid nanofluids across a vertical plate. This fluid is drenched under the influence of mixed convection in a Darcy–Forchheimer porous medium with heat source/sink and entropy generation.

By applying the proper similarity transformation, the partial differential equations that represent the leading model of the flow problem are reduced to ordinary differential equations. For the boundary value problem of the fourth-order code (bvp4c), a built-in MATLAB finite difference code is used to tackle the flow problem and carry out the dual numerical solutions.

The shear stress decreases, but the rate of heat transfer increases because of their greater influence on the permeability parameter and Weissenberg number for both solutions. The ability of hybrid nanofluids to strengthen heat transfer with the incorporation of a porous medium is demonstrated in this study.

The findings may be highly beneficial in raising the energy efficiency of thermal systems.

The originality of the research lies in the investigation of the Darcy–Forchheimer stagnation point flow of a Williamson hybrid nanofluid across a vertical plate, considering buoyancy forces, which introduces another layer of complexity to the flow problem. This aspect has not been extensively studied before. The results are verified and offer a very favorable balance with the acknowledged papers.

Today, individuals use social media to express their opinions and feelings, which offers a living laboratory to researchers in various fields, such as management, innovation, technology development, environment and marketing. It is therefore necessary to understand how the language used in user-generated content and the emotions conveyed by the content affect responses from other social media users.

In this study, almost 700,000 posts from Twitter (as well as Facebook, Instagram and forums in the appendix) are used to test a conceptual model grounded in signaling theory to explain how the language of user-generated content on social media influences how other users respond to that communication.

Extending developments in linguistics, this study shows that users react negatively to content that uses self-inclusive language. This study also shows how emotional content characteristics moderate this relationship. The additional information provided indicates that while most of the findings are replicated, some results differ across social media platforms, which deserves users' attention.

This article extends research on Internet behavior and social media use by providing insights into how the relationship between self-inclusive language and emotions affects user responses to user-generated content. Furthermore, this study provides actionable guidance for researchers interested in capturing phenomena through the social media landscape.

The COVID pandemic has prompted B2B and industrial marketing scholars to understand more about how external disruptions impact parties involved in B2B transactions. This paper aims to adopt an ecosystem perspective to conceptually classify the interactions between actors involved in B2B ecosystems.

This conceptual paper presents a framework across multiple levels of ecosystem interactions (at micro, meso and macrolevels) to illustrate how value cocreation and knowledge flows (as mechanisms underlying B2B relationships) are related to firm performance.

Based on this framework, this paper offers propositions and several research questions about the effects of disruptions and how they propagate among these essential business ecosystem elements.

This conceptual framework underscores the vital role of relationships and interactions in shaping B2B ecosystems, especially during disruptive periods. With a greater understanding of how these interactions operate across levels (micro, meso and macro), scholars and practitioners may be better able to navigate disruptive periods.

This research explores the differential effects of pixel-level and object-level visual complexity in firm-generated content (FGC) on consumer engagement in terms of the number of likes and shares, and further investigates the moderating role of image brightness.

Drawing on a deep learning analysis of 85,975 images on a social media platform in China, this study investigates visual complexity in FGC.

The results indicate that pixel-level complexity increases both the number of likes and shares. Object-level complexity has a U-shaped relationship with the number of likes, while it has an inverted U-shaped relationship with the number of shares. Moreover, image brightness mitigates the effect of pixel-level complexity on likes but amplifies the effect on shares; contrarily, it amplifies the effect of object-level complexity on likes, while mitigating its effect on shares.

Although images play a critical role in FGC, visual data analytics has rarely been used in social media research. This study identified two types of visual complexity and investigated their differential effects. We discuss how the processing of information embedded in visual content influences consumer engagement. The findings enrich the literature on social media and visual marketing.

The COVID-19 pandemic has led to major sales strategy and process changes as many interactions migrated from face-to-face to virtual environments. The nature of the interactions changed, and sales firms, the sales function and salespeople created new processes to excel in virtual environments. As sales processes evolve further, this paper aims to focus on understanding the enduring shifts in sales strategy and processes. In addition, this study seeks to understand the characteristics of enduring shifts and how they are distinct from temporary shifts.

This qualitative analysis provides a comprehensive overview of the sales organizations and salespeople over the period from the start of the pandemic to early 2022. The authors interviewed 66 sales professionals from different countries and industries to better understand the temporary and enduring shifts in sales strategy and processes, adopting ad inductive and narrative approach.

There are four major findings. First, four key themes emerged: increased digitalization, resistance to digitalization, sales process changes and sales organization transformation. Second, changes are classified as temporary, permanent and accelerated changes. Third, some proposed changes were not supported. Finally, five findings were found that were not discussed in previous literature.

This paper finds distinctive findings that offer additional valuable insights that connect to and extend existing literature. These include emerging themes, classification shifts, unsupported proposed changes and unique findings.