Search results

The poor corrosion resistance of the ferrite-pearlite steel limits its application in marine engineering because of the enhanced galvanic effect caused by continuously accumulated cementite. Cr as one principal alloying element is commonly used to improve the corrosion resistance of steels. This paper aims to study the effect of Cr on corrosion behaviors of ferrite-pearlite steels in an acidic environment.

The tested steels were immersed in a simulated solution of 10 Wt.% NaCl with pH 0.85 for 72 h to evaluate the corrosion rate. After the immersion test, the corrosion morphologies and products were tested by scanning electron microscopy, energy dispersive X-ray analysis and X-ray diffraction. Meanwhile, an electrochemical workstation was used to study the electrochemical behaviors of samples.

At the initial corrosion stage, the corrosion rate increased in the sequence of Cr₀, Cr_0.5 and Cr₁ steels, which was because of the competitive effect between the area ratio and the driving force caused by alloyed Cr. However, Cr₁ steel exhibited the best corrosion resistance after a 72-h immersion test. This was because the alloyed Cr promoted the formation of protective Fe₂O₃ and FeCr₂O₄, which suppressed the preferential dissolution of ferrite and, thus, reduced the accumulation rate of carbides, resulting in the weakened galvanic corrosion.

This paper reports the role that Cr plays in the galvanic corrosion of ferrite-pearlite steels, which is important for the engineering application of ferrite-pearlite steels in marine environment.

This study aims to investigate the effect of V doping on the microstructure, chemical stability, mechanical and vacuum tribological behavior of sputtered MoS₂ coatings.

The MoS₂-V coatings are fabricated via tuning V target current by magnetron sputtering technique. The structural characteristic and elemental content of the coatings are measured by field emission scanning electron microscopy, X-ray diffractometer, electron probe X-ray micro-analyzer, Raman, X-ray photoelectron spectroscopy, high resolution transmission electron microscope and energy dispersive spectrometer. The hardness of the deposited coatings are tested by a nanoindentation technique. The vacuum tribological properties of MoS₂-V coatings are studied by a ball-on-disc tribometer.

Introducing V into the MoS₂ coatings results in a more compact microstructure. The hardness of the coatings increases with the doping of V. The MoS₂-V coating deposited at a current of 0.2 A obtains the lowest friction coefficient (0.043) under vacuum. As the amount of V doping increases, the wear rate of the coating decreases first and then increases, among which the coating deposited at a current of 0.5 A has the lowest wear rate of 2.2 × 10–6 mm³/N·m.

This work elucidates the role of V doping on the lubrication mechanism of MoS₂ coatings in a vacuum environment, and the MoS₂-V coating is expected to be applied as a solid lubricant in space environment.

With the increase in population, the energy needs of countries are also increasing. These countries have difficulties in meeting these increasing needs. Countries that cannot meet this need have to import energy from abroad. This situation adversely affects the current account balance of countries. Nuclear energy investments allow countries to obtain their own energy, although there are some criticisms. In this framework, while some countries in the world increase their nuclear energy investments, some countries do not have any nuclear power plants (NPP). There are 32 such countries where nuclear energy projects are running till date. Therefore, it is very important to determine the socio-economic variables of countries that have nuclear energy investments. In this context, a detailed literature analysis will be made first to determine socio-economic criteria. Then, the importance weights of these factors will be calculated using the Decision Making Trial and Evaluation Laboratory (DEMATEL) method. The profiles of the countries that make nuclear energy investments demonstrate that education level is the most essential socio-economic factor for the improvement of nuclear energy investments. Also, income inequality is another important variable in this regard. However, consumption behaviour and saving behaviour have the lowest weights.

This study aims to examine how the knowledge breadth and depth of a patent affect its likelihood of being pledged. It also seeks to explore whether these relationships change diversely in different technological environments.

A complementary log-log model with random effects was conducted to test the hypotheses using a unique data set consisting of 348,927 invention patents granted by the China National Intellectual Property Administration from 1985 to 2015 belonging to 74,996 firms.

The findings reveal that both knowledge breadth and depth of a patent positively affect its likelihood of being pledged. Furthermore, the knowledge breadth and depth entail different degrees of superiority in different technological environments.

This study focuses on the effect of an individual patent’s knowledge base on its likelihood of being selected as collateral. It does not consider the influence of the overall knowledge characteristics of the selected patent portfolio.

Managers need to pay attention to patents’ knowledge characteristics and the changes in technological environments to select the most suitable patents as collateral and thus improve the success rate of pledge financing.

This study explores the impact of multidimensional characteristics of knowledge base on patent pledge financing within a systematic theoretical framework and incorporates technological environments into this framework.

The purpose of this paper is to explore the factors that influence migrant workers' household registration transfer willingness at both individual and urban levels and to provide empirical evidence on adjusting the household registration system to accommodate economic development and migrant workers' imbalances.

This paper adopts a hierarchical nonlinear model and examines individual and urban influencing factors of migrant workers' household registration transfer willingness, based on the data from China Migrants Dynamic Survey (CMDS) and the Urban Statistical Yearbooks.

This paper shows that: (1) multi-factors, such as age, education, marital status, household demographics, industry and migrant workers' contract coverage, have significant effects on migrant workers' household registration transfer willingness; (2) The urban public service equalization indicators, such as regional economic, educational resources, medical care and ecological quality, have significant effects on migrant workers' willingness to transfer household registration; (3) The heterogeneity of migrant workers' willingness to transfer household registration is significant in central, eastern and western China.

The authors provide a fresh perspective on population migration research in China and other countries worldwide based on the pull–push migration theory, which incorporates both individual and macro (urban) factors, enabling a comprehensive examination of the factors influencing household registration transfer willingness. This hierarchical ideology and approach (hierarchical nonlinear model) could be extended to investigate the influencing factors of various other human intentions and behaviors.

Micro approaches (individual perspective) have dominated existing studies examining the factors influencing migrant workers' household registration transfer willingness. The authors combine individual and urban perspectives and adopt a more comprehensive hierarchical nonlinear model to extend the empirical evidence and provide theoretical explanations for the above issues.

Vision, audition, olfactory, tactile and taste are five important senses that human uses to interact with the real world. As facing more and more complex environments, a sensing system is essential for intelligent robots with various types of sensors. To mimic human-like abilities, sensors similar to human perception capabilities are indispensable. However, most research only concentrated on analyzing literature on single-modal sensors and their robotics application.

This study presents a systematic review of five bioinspired senses, especially considering a brief introduction of multimodal sensing applications and predicting current trends and future directions of this field, which may have continuous enlightenments.

This review shows that bioinspired sensors can enable robots to better understand the environment, and multiple sensor combinations can support the robot’s ability to behave intelligently.

The review starts with a brief survey of the biological sensing mechanisms of the five senses, which are followed by their bioinspired electronic counterparts. Their applications in the robots are then reviewed as another emphasis, covering the main application scopes of localization and navigation, objection identification, dexterous manipulation, compliant interaction and so on. Finally, the trends, difficulties and challenges of this research were discussed to help guide future research on intelligent robot sensors.

The increasing urgency to address climate change in construction has made green construction (GC) and sustainability critical topics for academia and industry professionals. However, the volume of literature in this field has made it impractical to rely solely on traditional systematic evidence mapping methodologies.

This study employs machine learning (ML) techniques to analyze the extensive evidence-base on GC. Using both supervised and unsupervised ML, 5,462 relevant papers were filtered from 10,739 studies published from 2010 to 2022, retrieved from the Scopus and Web of Science databases.

Key themes in GC encompass green building materials, construction techniques, assessment methodologies and management practices. GC assessment and techniques were prominent, while management requires more research. The results from prevalence of topics and heatmaps revealed important patterns and interconnections, emphasizing the prominent role of materials as major contributors to the construction sector. Consistency of the results with VOSviewer analysis further validated the findings, demonstrating the robustness of the review approach.

Unlike other reviews focusing only on specific aspects of GC, use of ML techniques to review a large pool of literature provided a holistic understanding of the research landscape. It sets a precedent by demonstrating the effectiveness of ML techniques in addressing the challenge of analyzing a large body of literature. By showcasing the connections between various facets of GC and identifying research gaps, this research aids in guiding future initiatives in the field.

In the context of innovation-driven development strategy, open innovation has become an important way for enterprises to gain competitive advantages on the path of innovation and development. However, with the increasing competition, enterprises' open innovation is restricted by some constraints. How to promote open innovation in the restricted situations has become an existing research gap. Based on the perspective of digital transformation, this paper discusses how to promote the open innovation of enterprises under the restricted situations and find its breakthrough path, and analyzes the moderating effect of innovation persistence and political relevance.

Due to the complexity and confidentiality of military–civilian integration enterprises, they have become typical innovation-restricted enterprises. In this study, it selects a-share listed companies in the field of military–civilian integration in China in 2016–2020 as the research sample, and uses the two-way fixed-effect model to analyze the proposed variables. Finally, the robustness of the results in this paper is verified by a series of robustness tests and endogeneity tests.

The results show that digital transformation facilitates open innovation in military–civil integration enterprises, and that innovation persistence and political relevance positively moderate the relationship between the two. Further, digital transformation can promote open innovation in military–civil integration enterprises by easing the financing constraints and reducing information asymmetry. Innovation persistence has a more pronounced positive moderating effect among civilian-to-military and SMEs, and digital transformation of firms in the South has a negative effect on open innovation, but innovation persistence and political relevance dampen this negative effect.

Previous studies on the restrictions of open innovation or its dark side are mostly case studies and qualitative research. In contrast, the superiority and novelty of this study is in the form of a typical innovation-restricted enterprises “civil-military integration enterprise” as the research sample, based on the perspective of digital transformation, through empirical analysis method to explore how to better implementation of open innovation in the restricted situations. The findings of the study can not only enrich the application of digital transformation and open innovation theory, but also provide practical guidance for military–civil integration innovation in restricted situations.

A successful process of design concept evaluation has positive influence on subsequent processes. This study aims to consider the evaluation information at multiple stages and the interaction among evaluators and improve the credibility of evaluation results.

This paper proposes a multi-stage approach for design concept evaluation based on complex network and bounded confidence. First, a network is constructed according to the evaluation data. Depending on the consensus degree of evaluation opinions, the number of evaluation rounds is determined. Then, bounded confidence rules are applied for the modification of preference information. Last, a planning function is constructed to calculate the weight of each stage and aggregate information at multiple evaluation stages.

The results indicate that the opinions of the evaluators tend to be consistent after multiple stages of interactive adjustment, and the ordering of design concept alternatives tends to be stable with the progress of the evaluation.

Updating preferences according to the bounded confidence rules, only the opinions within the trust threshold are considered. The attribute information of the node itself is inadequately considered.

This method addresses the need for considering the evaluation information at each stage and minimizes the impact of disagreements within the evaluation group on the evaluation results.

This study investigates the relationships among digital transformation, technological innovation, industry–university–research collaborations and labor income share in manufacturing firms.

The relationships are tested using an empirical method, constructing regression models, by collecting 1,240 manufacturing firms and 9,029 items listed on the A-share market in China from 2013 to 2020.

The results indicate that digital transformation has a positive effect on manufacturing companies’ labor income share. Technological innovation can mediate the effect of digital transformation on labor income share. Industry–university–research cooperation can positively moderate the promotion effect of digital transformation on labor income share but cannot moderate the mediating effect of technological innovation. Heterogeneity analysis also found that firms without service-based transformation and nonstate-owned firms are better able to increase their labor income share through digital transformation.

This study provides a new path to increase the labor income share of enterprises to achieve common prosperity, which is important for manufacturing enterprises to better transform and upgrade to achieve high-quality development.