Search results

In the stock market, herding behavior occurs when investors mimic the actions of others in their investment decisions. As a result, the market becomes inefficient and speculative bubbles form. This study aims to investigate the relationship between information, overconfidence, market sentiment, experience and national culture, and herding behavior among Malaysian investors. A total of 400 questionnaires are distributed to bank institutions' investors. The survey design based on cross-sectional data is analyzed using the Partial Least Squares Structural Equation Model. The results indicate that information, market sentiment, experience, and national culture are positively related to herding behavior, while overconfidence has no effect. With this, the government should strengthen regulations to prevent the dissemination of misleading information. Moreover, investors are encouraged to overcome narrow thinking by expanding their understanding of different cultures when making investment decisions.

This study aims to investigate the effect of V doping on the microstructure, chemical stability, mechanical and vacuum tribological behavior of sputtered MoS₂ coatings.

The MoS₂-V coatings are fabricated via tuning V target current by magnetron sputtering technique. The structural characteristic and elemental content of the coatings are measured by field emission scanning electron microscopy, X-ray diffractometer, electron probe X-ray micro-analyzer, Raman, X-ray photoelectron spectroscopy, high resolution transmission electron microscope and energy dispersive spectrometer. The hardness of the deposited coatings are tested by a nanoindentation technique. The vacuum tribological properties of MoS₂-V coatings are studied by a ball-on-disc tribometer.

Introducing V into the MoS₂ coatings results in a more compact microstructure. The hardness of the coatings increases with the doping of V. The MoS₂-V coating deposited at a current of 0.2 A obtains the lowest friction coefficient (0.043) under vacuum. As the amount of V doping increases, the wear rate of the coating decreases first and then increases, among which the coating deposited at a current of 0.5 A has the lowest wear rate of 2.2 × 10–6 mm³/N·m.

This work elucidates the role of V doping on the lubrication mechanism of MoS₂ coatings in a vacuum environment, and the MoS₂-V coating is expected to be applied as a solid lubricant in space environment.

The metallic alloys and their components fabricated via laser powder bed fusion (LPBF) suffer from the microvoids formed inevitably due to the extreme solidification rate during fabrication, which are impossible to be removed by heat treatment. This paper aims to remove those microvoids in as-built AlSi10Mg alloys by hot forging and enhance their mechanical properties.

AlSi10Mg samples were built using prealloyed powder with a set of optimized LPBF parameters, viz. 350 W of laser power, 1,170 mm/s of scan speed, 50 µm of layer thickness and 0.24 mm of hatch spacing. As-built samples were preheated to 430°C followed by immediate pressing with two different thickness reductions of 10% and 35%. The effect of hot forging on the microstructure was analyzed by means of X-ray diffraction, scanning electron microscopy, electron backscattered diffraction and transmission electron microscopy. Tensile tests were performed to reveal the effect of hot forging on the mechanical properties.

By using hot forging, the large number of microvoids in both as-built and post heat-treated samples were mostly healed. Moreover, the Si particles were finer in forged condition (∼150 nm) compared with those in heat-treated condition (∼300 nm). Tensile tests showed that compared with heat treatment, the hot forging process could noticeably increase tensile strength at no expense of ductility. Consequently, the toughness (integration of tensile stress and strain) of forged alloy increased by ∼86% and ∼24% compared with as-built and heat-treated alloys, respectively.

Hot forging can effectively remove the inevitable microvoids in metals fabricated via LPBF, which is beneficial to the mechanical properties. These findings are inspiring for the evolution of the LPBF technique to eliminate the microvoids and boost the mechanical properties of metals fabricated via LPBF.

This paper investigates the buy online and pick up in-store cooperation (BOPSC) of online and offline retailers. Specifically, this study solves the following questions: (1) What is the impact of BOPSC on their optimal price and sales volume of products? (2) When should an online retailer and an offline retailer conduct the BOPSC strategy with each other?

The paper first establishes two game models to explore the equilibriums of online and offline retailers in non-BOPSC and BOPSC. Then the condition for online and offline retailers to implement BOPSC strategy are determined. Furthermore, the applicability of the BOPSC strategy is enhanced by incorporating numerical analysis.

The study’s findings reveal that BOPSC strategy will not always beneficial to online and offline retailers, which depends on the total cost of online shopping and the product valuation of consumers. BOPSC strategy leads to the increase of prices and online orders, and the demand of offline retailer is eroded. Moreover, BOPS cooperation between different retailers is easier to achieve than omni-channel integration strategy. When the convenience difference between offline shopping and BOPSC pick-up is moderate, the effectiveness of BOPSC strategy can be improved.

This study has the following two main contributions: Firstly, the authors investigate the effects of BOPSC strategy on the prices of online and offline retailers. The study results show that the BOPSC strategy alleviates price competition and promotes a win–win situation between online retailers and offline retailers. Secondly, this paper mainly studies the cooperative behavior between online and offline retailers and reveals the optimal conditions for online and offline retailers to adopt BOPSC strategy. It can help small- and medium-sized online and offline retailers to choose suitable products for BOPSC strategy, so as to achieve the purpose of increasing profit.

The study aims to draw lessons from other countries and propose a framework for developing smart libraries in transformation in South Africa. The framework will be useful to policymakers and scholars in library and information science.

This study used a qualitative approach based on a systematic literature review and the researchers’ experience concerning the transformation of smart libraries in South Africa. The researchers selected databases to access full-text, abstract or full-text linking facilities. The researchers generated the study’s literature review using keywords derived from themes. The keywords used include “smart libraries,” “functions of smart libraries” and “smart library infrastructure,” based on the objectives of the study.

The findings reveal that developing smart libraries in South Africa is feasible, but all stakeholders must cooperate and collaborate to create smart libraries. The findings of this study show that South Africa can draw lessons from other countries on the way forward in developing smart libraries. The results indicate that lack of funding, digital infrastructure and technical skills are among the factors inhibiting the development of smart libraries.

The issue of smart libraries has become a key on the agenda on a global scale, and South Africa is no exception to such developments. This study proposes a framework for developing smart libraries based on lessons learned within and outside South Africa.

The COVID-19 pandemic has caused significant mortality and morbidity worldwide. However, the role of dietary patterns as a potential risk factor for COVID-19 has not been well established, especially in studies with large samples. Therefore, this study aims to identify and evaluate the association between major dietary patterns and COVID-19 among adults from Iran.

In this cross-sectional study, the authors included 9,189 participants aged 20–70 who participated in the Yazd Health Study (YaHS) and Taghzieh Mardom-e-Yazd study (TAMIZ). They used factor analysis to extract dietary patterns based on a food frequency questionnaire (FFQ). Then, they assessed the relationship between these dietary patterns and the odds of COVID-19.

This study identified two major dietary patterns: “high protein and high fiber” and “transitional”. Participants in the highest tertile of the “high protein and high fiber” dietary pattern, which included vegetables, fruits, dairy and various kinds of meats such as red meat, fish and poultry, had a lower odds of COVID-19 compared with those in the lowest tertile. However, the “transitional” dietary pattern did not affect the risk of COVID-19.

In conclusion, a “high protein, high fiber” diet may lower the odds of COVID-19. This study suggests that dietary patterns may influence the severity and spread of future similar pandemics.

This study aims to discuss the influences of surface severe plastic deformation (S²PD) on the electrochemical corrosion, pitting corrosion, intergranular corrosion, stress corrosion cracking of aluminum (Al) alloys and attempt to correlate the microstructural/compositional changes with the performances.

This study provides a novel gradient design of structure/composition caused by S²PD for the purpose of enhancing Al alloys’ corrosion resistance.

S²PD has a significant effect on corrosion behavior of Al alloys through tuning the grain size, residual stress, composition, grain boundary phase and second phase particle distribution.

Although Al alloys are known to form a protective Al₂O₃ film, corrosion is a major challenge for the longevity of Al structures across numerous industries, especially for the infrastructures made of high-strength Al alloys. Traditional strategies of improving corrosion resistance of Al alloys heavily relied on alloying and coatings. In this review, gradient design of structure/composition caused by S²PD provides a novel strategy for corrosion protection of Al alloys, especially in the enhancement of localized corrosion resistance.

It is of a great significance for the health monitoring of a liquid rocket engine to build an accurate and reliable fault prediction model. The thrust of a liquid rocket engine is an important indicator for its health monitoring. By predicting the changing value of the thrust, it can be judged whether the engine will fail at a certain time. However, the thrust is affected by various factors, and it is difficult to establish an accurate mathematical model. Thus, this study uses a mixture non-parametric regression prediction model to establish the model of the thrust for the health monitoring of a liquid rocket engine.

This study analyzes the characteristics of the least squares support vector regression (LS-SVR) machine . LS-SVR is suitable to model on the small samples and high dimensional data, but the performance of LS-SVR is greatly affected by its key parameters. Thus, this study implements the advanced intelligent algorithm, the real double-chain coding target gradient quantum genetic algorithm (DCQGA), to optimize these parameters, and the regression prediction model LSSVRDCQGA is proposed. Then the proposed model is used to model the thrust of a liquid rocket engine.

The simulation results show that: the average relative error (ARE) on the test samples is 0.37% when using LS-SVR, but it is 0.3186% when using LSSVRDCQGA on the same samples.

The proposed model of LSSVRDCQGA in this study is effective to the fault prediction on the small sample and multidimensional data, and has a certain promotion.

The original contribution of this study is to establish a mixture non-parametric regression prediction model of LSSVRDCQGA and properly resolve the problem of the health monitoring of a liquid rocket engine along with modeling the thrust of the engine by using LSSVRDCQGA.

Charitable giving in China has moved from being subjected to government attention and public skepticism to receiving government encouragement and public support. The role played by political connections in philanthropy is indisputable, although very few studies have explored their association from the perspective of the country’s first Charity Law of 2016. This study aims to contribute to the ongoing debate about the 2016 Charity Law and offers an understanding of the future trends in corporate charitable giving.

Using empirical analysis of data collected from listed companies in China, this study analyzes the impact of political connections on corporate charitable giving before and after the 2016 Charity Law. The study adopts three leading theories from previous research into corporate charitable giving and political connections: corporate social responsibility, resource dependence theory and stakeholder theory. A conceptual framework is outlined, and hypotheses are formulated accordingly.

The results show that political connections have a substantial positive impact on corporate charitable giving, both before and after the implementation of the 2016 Charity Law, which has significantly promoted and increased the amount and proportion of charitable giving. Although the 2016 Charity Law attempted to weaken the political connections of enterprises, the influence of political connections on corporate charitable giving has proved difficult to diminish or eliminate, as charity is dominated by the state.

This study explores the association between political connections and corporate charitable giving from the perspective of China’s Charity Law of 2016.

Common institutional ownership is a phenomenon that has extended throughout the capital markets in recent years and has a significant impact on business strategy decisions. The study intends to investigate the effect of common institutional ownership on corporate over-financialization and potential functioning mechanisms.

Using panel data from Chinese-listed companies over the period of 2003–2021, the authors conduct regression models which controlled year-, industry- and regional fixed effects to explore the impact of common institutional ownership on corporate over-financialization.

This study concludes that corporate over-financialization may be prevented via common institutional ownership. The mechanism test suggests that common institutional ownership inhibits corporate over-financialization by improving internal control quality and enhancing financial flexibility. Besides, heterogeneity analysis shows that the inhibiting effect of common institutional ownership on corporate over-financialization is more pronounced in stability-oriented institutional investors and high financing constraints firms.

This paper makes a valuable contribution to the current studies on effective strategies to prevent enterprises from becoming overly financialized by recognizing common institutional ownership. Furthermore, this paper adds to the research on common institutional ownership’s economic consequences. Finally, this study provides management implications for how to optimize corporate governance structures, curb the financialization of entities in practice and promote the development of the real economy.