Search results

The proposed method is to generate the 3 D model of frame assemblies based on their topological model automatedly. It was a very demanding task and there was no appropriate automated method to facilitate this work.

The proposed method includes two stages. The first stage is decisive. In this stage, a deep learning network and the Chu–Liu–Edmonds algorithm are used to recognize contact relations among parts. Based on this recognition, the authors perform a geometrical computation in the second stage to finalize the 3 D model.

The authors verify the feasibility of the proposed method using a case study and find that the classification rate of the deep learning network for part contact relations is higher than 75 per cent. Furthermore, more accurate results could be achieved with modification by the Chu–Liu–Edmonds algorithm. The proposed method has lower computational complexity compared with traditional heuristic methods, and its results are more consistent with existing designs.

The paper introduces machine learning method into assembly modelling issue. The proposed method divides the assembly modelling into two steps and solves the assemble relation creatively.

Frame assemblies are fundamental to many areas. The proposed method could automate frame assembly modelling in a viable way. It could benefit design and manufacture process significantly.

The proposed method expands the application of machine learning into a new field. It would be more useful than simple machine learning in industry. The proposed method is better than general heuristic algorithms. It outputs identical results when the inputs are the same. Meanwhile, the algorithmic complexity in worst situation is better than general heuristic algorithms.

Green space is one of the main measures to alleviate urban heat islands (UHI). The transformation mechanism of daytime and nighttime scale sensitivity of vegetation coverage to reduce the UHI effect in a daily cycle has been unclear. As a result, we propose a scale sensitivity measurement algorithm to study the spatial and temporal response relationship between UHI and green coverage. Based on the scale theory of landscape ecology and the method of geostatistical analysis, we adopted ArcGIS, MATLAB, SPSS, and other data processing software as well as a large amount of measured and high-resolution satellite imagery data of Beijing and Tianjin to quantitatively study their spatial scale sensitivity and daily variation features of urban green spaces to reduce summer UHI. The results show that first, the green coverage rate and the UHI intensity experience positive and negative correlations during the daytime, and negative correlations at night. When the correlation coefficient is significant, there is a linear relationship between the UHI intensity and the core green rate. Second, the reduction of the UHI by green spaces displays spatial and temporal change scale sensitivity characteristics. The radius scale of daytime sensitivity is 15m, and the radius scale of nighttime sensitivity is 60m. The study's conclusion enriches the theoretical parameters of landscape ecological scales and patterns, and provides spatial and temporal scales for systematic planning of green space to reduce UHI.

The purpose of this paper is to present an automated method for complicated truss structure subassembly identification.

A community-detecting algorithm is introduced and adapted to reach the target. The ratio between oriented bounding boxes of parts is used as the weight to reflect the compact degree of assembly relationships. The authors also propose a method to merge nodes together at cut-vertex in model, by which the solving process could be accelerated.

This method could identify the subassemblies of complex truss structures according to the specific requirements.

This research area is limited to truss structures. This research offers a new method in assembly sequences planning area. It could identify subassemblies in complex truss structures, with which the existing method is not adequate to deal.

This method could facilitate the complex truss structures assembly planning, lower the human errors and reduce the planning time.

The method could inspire general assembly analysis planning.

All authors of this paper confirm that this manuscript is original and has not been submitted or published elsewhere.

Due to social transformation in China, more than 100,000,000 people are migrating within the country. Many parents are forced to leave their children behind when they migrate. In 2008, 58,000,000 children were living as left‐behind children, mainly in the rural parts of China (Zhang, 2009).Migration and its accompanying stressors may affect the mental health of the left‐behind children. This unique literature review of Chinese literature summarises the present state of knowledge and reviews the influential factors. Possible approaches to intervention and system reforms are discussed.A literature review was performed of published studies between 2001 and 2008. Databases used were Fujian Medical University Library Interface, Chinese National Knowledge Infrastructure, Wanfang Data, and VIP Information. The Chinese word for ‘left‐behind’ was used as a key word. Books, book chapters, monographs and studies on caring were searched electronically and by hand. Altogether, 53 items were found, discussed and grouped together. Migration affected the mental health of the left‐behind children in a passive way, especially their emotions and social behaviour.There is still controversy over how serious mental health problems are among children who have been left behind. Life events, personality, coping strategies and social suppor t can be regarded as four main factors that are predictive of mental health, which provides theoretical guidance for intervention. Suppor t and prevention of mental health problems in schools, in families and in primary care should be developed and studied.

Sedimentary facies type of the Shanxi Formation in northeastern Ordos Basin is an ongoing debate. Based on field measurements, sample collection and identification, and laboratory analysis, we systematically evaluated the sedimentary characteristics of the sandstone bodies of Shanxi Formation of Chengjiazhuang section in Liulin. Analysis included identifying sample composition, grain size, texture, sedimentary structure and spatial distribution. We came to the conclusion that the sedimentary environment of Shanxi Formation is deltaic. This deltaic environment included deltaic front and deltaic plain. It can be further divided into five sedimentary microfacies: subfluvial distributary channel, subfluvial distributary interchannel, distributary channel, levee, and peat bog. And lastly, the evolution of sedimentary environment of Shanxi Formation is discussed.

The purpose of this paper is to investigate the hydrodynamic performance of liquid film seals with oblique grooves (OGs) and spiral grooves (SGs), considering cavitation, compare and analyze the differences between them.

Considering cavitation effect, the incompressible steady-state Reynolds equation was solved to obtain the sealing performance parameters of the liquid film seal with oblique groove and spiral groove.

The hydrodynamic performance of oblique groove seal (OGS) and spiral groove seal (SGS) shows a similar trend with the change of operating parameters. When the groove angle is less than 20°, the load-carrying capacity of SGS is better than that of OGS, while when the groove angle continues to increase, the hydrodynamic performance of OGS is slightly better than that of SGS, and more suitable for use under small differential pressure and high speed.

The hydrodynamic characteristics of liquid film seals with oblique grooves and spiral grooves considering cavitation effect were studied, which provides a theoretical reference for the application of oblique groove seal.

This study aims to investigate the effect of V doping on the microstructure, chemical stability, mechanical and vacuum tribological behavior of sputtered MoS₂ coatings.

The MoS₂-V coatings are fabricated via tuning V target current by magnetron sputtering technique. The structural characteristic and elemental content of the coatings are measured by field emission scanning electron microscopy, X-ray diffractometer, electron probe X-ray micro-analyzer, Raman, X-ray photoelectron spectroscopy, high resolution transmission electron microscope and energy dispersive spectrometer. The hardness of the deposited coatings are tested by a nanoindentation technique. The vacuum tribological properties of MoS₂-V coatings are studied by a ball-on-disc tribometer.

Introducing V into the MoS₂ coatings results in a more compact microstructure. The hardness of the coatings increases with the doping of V. The MoS₂-V coating deposited at a current of 0.2 A obtains the lowest friction coefficient (0.043) under vacuum. As the amount of V doping increases, the wear rate of the coating decreases first and then increases, among which the coating deposited at a current of 0.5 A has the lowest wear rate of 2.2 × 10–6 mm³/N·m.

This work elucidates the role of V doping on the lubrication mechanism of MoS₂ coatings in a vacuum environment, and the MoS₂-V coating is expected to be applied as a solid lubricant in space environment.

Roots of global Terrorism are in ‘failed’ states carved out of multiracial empires after World Wars I and II in name of ‘national self‐determination’. Both sides in the Cold War competed to exploit the process of disintegration with armed and covert interventions. In effect, they were colluding at the expense of the ‘liberated’ peoples. The ‘Vietnam Trauma’ prevented effective action against the resulting terrorist buildup and blowback until 9/11. As those vultures come home to roost, the war broadens to en vision overdue but coercive reforms to the postwar system of nation states, first in the Middle East. Mirages of Vietnam blur the vision; can the sole Superpower finish the job before fiscal and/or imperial overstretch implode it?

The purpose of this paper is to summarize the advances in grey system theory research and various application achievements in science and engineering. At the same time, it commemorates the 40th anniversary of the birth of grey system theory and the 10th anniversary of Grey Systems–Theory and Application.

Firstly, the innovations of theoretical research in grey system theory were summarized and some of the widely recognized new results are briefly described. By searching and combing the research results of grey system theory in China national knowledge infrastructure (CNKI) database and Web of Science by Institute for Scientific Information (ISI), this paper shows the rapid development trend of grey system theory in the past 40 years, and the successful applications of grey system theory in the fields of social sciences, natural sciences and engineering technologies.

More than 227 thousands literature were found by input 10 phrases such as grey system, grey number and sequence operator etc. in CNKI database. After entering the new century, the number of grey system papers included in CNKI database is increasing rapidly. Since 2008, more than 10 thousands papers have been included per year and more than 15 thousands papers have been included per year since 2014. Grey system method and model are widely used in physics, chemistry, biology and other fields of natural science, as well as transportation, electric power, machinery and other fields of engineering technology, and a large number of valuable results have been achieved.

It can be seen that the grey system theory plays an important role in promoting China’s scientific and technological progress, innovation and development and high-level talent training from tens of thousands of literatures marked with important national science and technology projects and a large number of grey system literatures published by China’s double first-class universities and double first-class discipline construction universities.

Both innovations of theoretical research and practical application play important role in the growth of new theory. The innovations of theoretical research provide methods and tools for practical application, which is conducive to improve application efficiency and broaden application fields. A large number of practical applications needs have become the source of theoretical innovation and the solid background for the birth of theoretical innovation achievements.

The purpose of this paper is to investigate the effects of surface topography, including surface roughness, waviness and taper, on the cavitation of liquid film lubricated mechanical seals (LFL-MS).

A universal governing equation considering cavitation is established, and an equivalent relative density is defined to characterize the cavitation degree. The equation is discretized by the finite volume method and solved by the Gauss–Seidel relaxation scheme.

Results indicate that both radial length and a circumferential width of the cavitation zone and cavitation degree are affected significantly by the waviness amplitude and taper, but the effect of surface roughness is limited.

Effect mechanism of surface topography on the cavitation of LFL-MS is investigated and cavitation degree is reflected by an equivalent relative density. The results further help to comprehensively explore the cavitation mechanism.