Search results

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

The study aims to identify the determinants of customer satisfaction in the electronic commerce (e-commerce) industry in Bangladesh. It also investigates whether acceptance of IT innovation mediates the relationship between the determinants of e-commerce and customer satisfaction.

A survey questionnaire had been designed and distributed among the customers of e-commerce businesses. Data were collected from 408 respondents, who were mostly from urban areas of the country. The collected data had been analysed with the application of the partial least square approach using SmartPLS4. First, the measurement model was applied to determine the validity and reliability of the dataset. Then, the structural model was utilized to justify the hypothesis.

The results showed that customer service, perceived ease of use and customer trust in e-commerce services have a significant positive impact on customer satisfaction. The acceptance of IT innovation, which showed a positive influence on customer satisfaction, enhanced customer satisfaction when accompanied by perceived ease of use and digital literacy.

The results would have valuable insight for the e-commerce business in designing their products and services and taking policies to achieve long-term customer loyalty.

This is the first study that incorporates IT innovation acceptance as a mediating variable. Although a number of factors have been identified as the determinants of customer satisfaction, the specific mechanism of IT innovation acceptance as a mediator between predictors and customer satisfaction is unique in this study.

While existing literature extensively explores manufacturing firms expanding into services, little is known about the modes of servitisation, the means by which they carry it out. This paper concentrates on acquisitions as a mode of servitisation. Post-acquisition integration is when the potential of an acquisition is realised. The paper therefore aims to categorise types of integrations following the acquisition of servitised firms and discusses their consequences for servitisation.

The empirical part of the paper is based on two case studies, each involving the acquisition of servitised firms. Both acquirers changed their integration approach over time.

The paper conceptualises three types of integrations: rhetorical, insulated and transformative integrations, indicating whether and how the acquirer becomes servitised following the integration. These highlight the analysis of integration based on business models and customer orientation in relation to servitisation.

This paper contributes to research on servitisation by emphasising acquisitions as a mode of servitisation and conceptualising three integration types related to business models and customer orientations. Furthermore, the paper highlights how an acquirer's servitisation leads to new offerings targeting new customers, as opposed to strengthening existing relationships.

Air transport accounts for nearly 40% worth of the global trade cargo volume, where more than 50% of the air cargo is carried on passenger flights. Therefore, this paper aims to focus on identifying the influencing factors for both passenger and cargo demand-driven networks to smoothen the global supply chain.

The data for the study was collected through literature reviews and interviews with industry experts. The analytical hierarchy process was used to analyze the expert's opinions on the critical factors affecting air cargo demand growth. Regression analysis was conducted using the selected variables to develop a model to calculate air cargo demand growth.

According to the expert opinion, it was identified that facilities under airport capacities and facilities are mainly affected by the air cargo carried by combi carriers. The model was developed considering the air connectivity index and air cargo demand at destination variables.

The factors identified here are mainly related to the current situation in Sri Lanka. Applying this methodology to other economic zones will add new factors related to their economic contexts and could be generalized as the influencing factors for the growth of air cargo demand by finding more results.

Previous studies have been conducted using different factors and models to forecast air cargo demand, and those did not consider demand from combi and all-cargo carriers together. More than 98% of air cargo trades in Sri Lanka are happening through combi carriers. Hence, Sri Lanka will be a best case study to analyze the behavior of combi carriers.

The integration of industry 4.0 has become a priority for many organizations. However, not all organizations are suitable and capable of implementing industry 4.0 because it requires a dynamic and flexible implementation strategy. The implementation of industry 4.0 often involves overcoming several tensions between internal and external stakeholders. This paper aims to explore the paradoxical tensions that arise for health-care organizations when integrating industry 4.0. Moreover, it discusses how a paradox lens can support the conceptualization and proposes techniques for handling tensions during the integration of industry 4.0.

This qualitative and in-depth study draws upon 32 semi-structured interviews. The empirical case concerns how two health-care organizations handle paradoxical tensions during the integration of industry 4.0.

The exploration resulted in six recurring technology tensions: technology invention (modularized design vs. flexible design), technology collaboration (automation vs. human augmentation), technology-driven patient experience (control vs. autonomy), technology uncertainty (short-term experimentation vs. long-term planning), technology invention and diffusion through collaborative efforts among stakeholders (selective vs. intensive collaboration) and technological innovation (market maintenance vs. disruption).

A paradox theory-informed conceptual model is proposed for how to handle tensions during the integration of industry 4.0. To the best of the authors’ knowledge, this is the first paper to introduce paradox theory for quality management, including lean and Six Sigma.

Seekers who visit professional virtual communities (PVCs) are usually motivated by knowledge-seeking, which is a complex cognitive process. How do seekers search for knowledge, and how is their search linked to prior knowledge or PVC situation factors? From the cognitive process and interactional psychology perspectives, this study investigated the three-way interactions between seekers’ expertise, task complexity, and perceptions of PVC features (i.e. knowledge quality and system quality) on knowledge-seeking strategies and resultant outcomes.

A field experiment was conducted with 119 seekers in a PVC using a 2 × 2 factorial design of seekers’ expertise (i.e. expert versus novice) and task complexity (i.e. low versus high).

The study reveals three significant insights: (1) For a high-complexity task, experts adopt an ask-directed searching strategy compared to novices, whereas novices adopt a browsing strategy; (2) For a high-complexity task, experts who perceive a high system quality are more likely than novices to adopt an ask-directed searching strategy; and (3) Task completion time and task quality are associated with the adoption of ask-directed searching strategies, whereas knowledge seekers’ satisfaction is more associated with the adoption of browsing strategy.

We draw on the perspectives of cognitive process and interactional psychology to explore potential two- and three-way interactions of seekers’ expertise, task complexity, and PVC features on the adoption of knowledge-seeking strategies in a PVC context. Our findings provide deep insights into seekers’ behavior in a PVC, given the popularity of the search for knowledge in PVCs.

This study aims to explore the empirical correlation between patient flow issues, quality of green health services and patient satisfaction in specialist medical department factors from patients’ perspectives as service consumers.

This research is a type of nonintervention empirical research that uses an open survey to explore the views and experiences of users of specialist medical department services. The targeted population is hospital patients included in the top five national PERSI (Indonesian Hospital Association) Award 2022 Green Hospital Category, with a total number of respondents of 572 people. This study uses the partial least square-structural equation modeling analysis method with the SmartPLS application.

Patient flow problems generally affect the quality of eco-friendly health services, except for the waiting time problem, which affects service quality. It should be understood as a top priority for patients to receive services from medical specialists without risking time as a core service aspect from the patient’s perspective. In addition, all variables in eco-friendly hospital services affect patient satisfaction, except in the case of visits to specialist medical departments, which do not affect medical support services and hospital practices that are responsive to the delivery of care services resulting from medical support services that are inseparable in integrated services as well as health care following medical ethics.

This study has a novelty in understanding the implications of green practice in determining patient satisfaction in medical specialist department as the epicenter of hospital services and the main object of assessment for the quality of hospital services.

The purpose of this study is to identify the level of quality of work life (QWL) of employees working in the Garment industries using a validated scale.

Survey methods were used for this study. A questionnaire was designed to collect the data and information, and it is validated through exploratory factor analysis, confirmatory factor analysis.

The majority of employees are not satisfied with the present status of QWL in garment units. Followings are the predominant components, which influence the QWL of employees compensation and rewards; job security; grievance handling; work environment; training and development; job nature; satisfaction in job; facilities and relation and cooperation.

The study was conducted in 133 garment industries where sample responses were obtained from 851 workers working in Indian Garment industries. In the competitive business environment, retaining a talented workforce is one of the big challenges to the organization. An unsatisfied employee is the first enemy of the organization, it is the prime task of the employers to keep the workforce at a satisfying level, otherwise, it will lead to employee turnover, performance and productivity. This paper helps to identify and quantify the components of the quality of work-life of employees if employers address these components job satisfaction level of employees will increase; therefore, our results will help the HR managers and policymakers to take appropriate decisions to enhance QWL.

The aim of this study is to empirically explore and analyze the concrete tasks of output measurement and the inherent challenges related to these tasks in a traditional and autonomous professional public work setting – the judicial system.

The analysis of the tasks is based on a categorization of general performance measurement motives (control-motivate-learn) and main stakeholder levels (society-organization-professionals). The analysis is exploratory and conducted as an empirical content analysis on materials and reports produced in two performance improvement projects conducted in European justice organizations.

The identified main tasks in the different categories are related to managing resources, controlling performance deviations, and encouraging improvement and development of performance. Based on the results, key improvement areas connected to output measurement in professional public organizations are connected to the improvement of objectivity and fairness in budgeting and work allocation practices, improvement of output measures' versatility and informativeness to highlight motivational and learning purposes, improvement of professional self-management in setting output targets and producing outputs, as well as improvement of organizational learning from the output measurement.

The paper presents empirically founded practical examples of challenges and improvement opportunities related to the tasks of output measurement in professional public organization.

This paper fulfils an identified need to study how general performance management motives realize as concrete tasks of output measurement in justice organizations.

Cotton fibre lots are graded and selected for yarn spinning based on their quality value which is a function of certain fibre properties. Cotton grading and selection has created a domain of emerging interest among the researchers. Several researchers have addressed the said issue using a few exponents of multi-criteria decision-making (MCDM) technique. The purpose of this study is to demonstrate a cotton selection problem using a recently developed measurement of alternatives and ranking according to compromise solution (MARCOS) method which can handle almost any decision problem involving a finite number of alternatives and multiple conflicting decision criteria.

The MARCOS method of the MCDM technique was deployed in this study to rank 17 cotton fibre lots based on their quality values. Six apposite fibre properties, namely, fibre bundle strength, elongation, fineness, upper half mean length, uniformity index and short fibre content are considered as the six decision criteria assigning weights previously determined by an earlier researcher using analytic hierarchy process.

Among the 17 alternatives, C9 secured rank 1 (the best lot) with the highest utility function (0.704) and C7 occupied rank 17 (the worst lot) with the lowest utility function (0.596). Ranking given by MARCOS method showed high degree of congruence with the earlier approaches, as evidenced by high rank correlation coefficients (Rs > 0.814). During sensitivity analyses, no occurrence of rank reversal is observed. The correlations between the quality value-based ranking and the yarn tenacity-based rankings are better than many of the traditional methods. The results can be improved further by adopting other efficient method of weighting the criteria.

The properties of raw cotton have significant impact on the quality of final yarn. Compared to the traditional methods, MCDM is reported as the most viable solution in which fibre parameters are given their due importance while formulating a single index known as quality value. The present study demonstrates the application of a recently developed exponent of MCDM in the name of MARCOS for the first time to address a cotton fibre selection problem for textile spinning mills. The same approach can also be extended to solve other decision problems of the textile industry, in general.

Novelty of the present study lies in the fact that the MARCOS is a very recently developed MCDM method, and this is a maiden application of the MARCOS method in the domain of textile, in general, and cotton industry, in particular. The approach is very simple, highly effective and quite flexible in terms of number of alternatives and decision criteria, although highly robust and stable.