Search results

Textiles as clothing material must fit the human body and senses. This fitting is an important performance of the textiles besides the utility performance of textiles such as fabric strength. For many years, the performance concerning this fitness has been evaluated subjectively by hand judgement. The fabric property judged in such a way is called fabric handle. Instead of the subjective method, the objective evaluation system of fabric handle has been developed. The system is introduced firstly. In this objective method, the handle is evaluated based on the fabric mechanical and surface properties measured by the KESF instrument. The mechanical parameters of fabric measured by the instrument are useful not only for the fabric handle evaluation but also for textile and apparel engineering through the direct use of the parameters. The applications of the objective measurement of fabric handle and properties to textile and apparel engineering are introduced.

Examines the tenth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

The main targets of the work are analysis and simulation of flying laboratory performance. In particular, synthesis of control system for handling qualities change and evaluation in flight are taken into consideration.

Modification of handling qualities is obtained by applying indirect flight control system (FBW). The properties of the optimal controller are calculated through the indirect (implicit) model‐following method. In particular, the modified version based on the computer simulations is used.

Calculation and simulation concern the synthesis of desired handling qualities of the general aviation aircraft PZL‐M20 “Mewa” equipped with indirect (FBW) experimental flight control system. Results of the simulation show that the flying laboratory has the same properties as modeled aircraft, and it is possible to say that handling properties concern attitude orientation of the experimental aircraft is similar to modeled commuter aircraft.

The result of research can be implemented on a project of the flying laboratory based on general aviation aircraft PZL M20 “Mewa”.

The paper presents the practical approach for synthesis of the “Simplified total in flight simulator” performance which can be used for analysis of handling qualities of general aviation aircraft equipped with FBW. Research of this type focuses on military and transport airplanes however, there are no published works in the area of small aircraft so far.

Examines the ninth published year of the ITCRR. Runs the whole gamut of textile innovation, research and testing, some of which investigates hitherto untouched aspects. Subjects discussed include cotton fabric processing, asbestos substitutes, textile adjuncts to cardiovascular surgery, wet textile processes, hand evaluation, nanotechnology, thermoplastic composites, robotic ironing, protective clothing (agricultural and industrial), ecological aspects of fibre properties – to name but a few! There would appear to be no limit to the future potential for textile applications.

Looks at the eighth published year of the ITCRR and the research, from far and near, involved in this. Muses on the fact that, though all the usual processes are to the fore, the downside part of the industry is garment making which is the least developed side. Posits that the manufacture of clothing needs to become more technologically advanced as does retailing. Closes by emphasising support for the community in all its efforts.

The purpose of this paper is to present the proposal of a Product Line (PL)-based approach for Business Process Management (BPM) projects that cover the entire BPM lifecycle and proposes integrating it with dynamic techniques still not used together.

The authors carried out this work using the design science research methodology. The authors assessed the proposed approach using a classification procedure created through a series of specific attributes, which enables a comparison of the proposed integrated approach with related works selected from a systematic literature review.

The comparative assessment has shown that the proposed approach presents the most comprehensive solution than any other similar one suggested for the same purpose, mainly in terms of the coverage of the entire BPM lifecycle and dynamic techniques.

Due to the high-level conceptual nature of the proposed approach, the authors could not evaluate it also in terms of some controlled experiment or a case study.

The proposed approach aims at improving the management of business processes in organizations in a systematic way using concepts and techniques that exist in other areas, but not widely used together yet, such as BPM, service-oriented computing, and Software PL.

This paper aims to explore how branding theory can be used to understand corporate real estate management's (CREM's) relationships with its customers. Specifically, the perspectives of CREM executives and customers are used to develop a statement of a CREM brand.

A multiple case study approach from four industry sections that consist of telecommunications, logistic, retail, and education from an emerging real estate market (Malaysia) and a mature real estate market (Australia). CREM executives and CREM customers from each case were interviewed to obtain information on CREM within organisations.

The findings indicate that CREM supports the business by managing organisations' strategic real estate resources as its brand. CREM executives focus more on the technicality of real estate functions, while CREM customers expect corporate real estate (CRE) to support their business functions.

A CREM brand is important to CREM relationship building with the targeted customers. Successful brand development is able to increase CREM visibility to customers and at the same time gain appreciation of its contributions to the organisations.

This is the first study that investigates CREM from a branding perspective. The mechanism for communicating CREM contributions using branding helps to increase acceptance from the customers.

The paper aims to present the design, validation and integration of a universal fabric gripper. Flexible material handling is one of the most challenging problems occurring in the field of manipulator robots. Because textile products shape and properties can widely vary, each textile and each technological operation should have its own specialized gripper. The objective of the work described here is therefore to design a universal gripper able to grip and transfer every kind of textile.

The design objectives are the ability to handle panels of varying shapes and sizes without material deformation and/or folding, and the easy integration with commercially available manipulator robots. To answer initial requirements and increase the textile gripping reliability, we opted to combine three different gripping technologies: vacuum, intrusion and pinch.

Each system was first validated independently through static tests. The vacuum technology offers a high reliability to handle impermeable materials. The intrusion technology is reliable for the manipulation of high porosity materials, while the pinch technology shows good results for all soft fabrics when combined with the vacuum technology. Then, the limits of the new gripper in terms of gripping capacity, compressed air consumption and characteristics and limitations of the flexible material handled were put in evidence using a robot arm. An automated selection program of the gripper based on the material characteristics has also been developed and implemented.

This paper fulfills an identified need to design a universal gripper able to grip and transfer every different kind of cut textile.

Due to the excellent functionality of graphene, the research on fiber modification by graphene has been receiving more and more attentions recently, and many research findings have been conducted. However, the purpose of this paper is to focus on the fiber modification method and corresponding modified fiber properties, but the research on processing of the modified fiber, especially the textile process, is little. Therefore, in the paper, the properties of one kind of textile GN fiber and the spinning method of the GN fiber blend yarn and the functionalities of corresponding fabric are studied.

In the paper, the properties of nylon fiber modified by graphene (GN) were studied first. Then, according to the tested results, one new blending process of the GN fiber and cotton fiber was given, and corresponding properties of the blend yarns were tested and analyzed. Finally, the knitted fabrics were produced using the spun blend yarns, and the antibacterial property, electromagnetic shielding property, anti-ultraviolet performance, anti-static performance and conventional mechanical, and appearance thermal-wet comfort properties were tested and comparatively analyzed.

The tested results showed that the functionality of all fabrics was effective due to the addition of the graphene in the fiber, especially the antibacterial property. With the increasing of the GN fiber in the blend yarns, the functionality of all fabrics was also increased first and then achieved stability.

One new blending process of the GN fiber and cotton fiber was given. In the spinning, the combed cotton sliver was produced first, and then was torn into small parts of combed cotton sliver fiber by hand. Then, the treated GN fibers and cotton fibers were mixed for the first time, and corresponding GN/C carding sliver was produced. In this blend processing, the mixed cotton fiber was used to improve the sliver processing of the GN fiber. Then, in the drawing process, the required number of GN/C carding sliver and combed cotton sliver were fed simultaneously, and GN fibers and cotton fibers were mixed for the second time, and corresponding four kinds of GN/JC blend yarns were produced. In this blend processing, the mixed cotton fiber was used to regulate the blending ratio.

Eri silk fiber has superior thermal insulation behavior, better softness than cotton fiber. However, Eri silk’s use in the commercial arena has not yet taken off. The purpose of the study is to explore the comfort properties of the fabric, which enhances the commercial acceptance of Eri silk clothing.

In this investigation, three different single knit Eri silk structures were produced with different loop lengths and yarn counts to analyze the influence of process variables on low-stress mechanical properties. To execute the research work, Eri silk spun yarn of three different linear densities (15 tex, 20 tex, 25 tex) were chosen. Three different knitted structures were produced, such as single jersey, popcorn and cellular blister, and two different loop lengths were also selected.

The cellular blister structure has shown appreciable low-stress properties next highest position was attained by the popcorn structure. Yarn fineness and loop length were significant with most of the low-stress properties.

The findings of this research will contribute to a greater awareness of Eri silk knitted fabric and its process parameters in relation to its commercial utility.

This study was conducted to explore the influence of knit structure, loop length and yarn count on the low-stress properties of Eri silk-based thermal clothing.