Search results

Severe airborne particulate pollution frequently occurs over the North China Plain (NCP) region in recent years. To better understand the characteristics of carbonaceous components in particulate matter (PM) over the NCP region.

PM samples were collected at a typical area affected by industrial emissions in Handan, in January 2016. The concentrations of organic carbon (OC) and elemental carbon (EC) in PM of different size ranges (i.e. PM_2.5, PM₁₀ and TSP) were measured. The concentrations of secondary organic carbon (SOC) were estimated by the EC tracer method.

The results show that the concentration of OC ranged from 14.9 μg m⁻³ to 108.4 μg m⁻³, and that of EC ranged from 4.0 μg m⁻³ to 19.4μg m⁻³, when PM_2.5 changed from 58.0μg m⁻³ to 251.1μg m⁻³ during haze days, and the carbonaceous aerosols most distributed in PM_2.5 rather than large fraction. The concentrations of OC and EC PM_2.5 correlated better (r = 0.7) than in PM_2.5−10 and PM_>10, implying that primary emissions were dominant sources of OC and EC in PM_2.5. The mean ratios of OC/EC in PM_2.5, PM_2.5–10 and PM_>10 were 4.4 ± 2.1, 3.6 ± 0.9 and 1.9 ± 0.7, respectively. Based on estimation, SOC accounted for 16.3%, 22.0% and 9.1% in PM_2.5, PM_2.5–10 and PM_>10 respectively.

The ratio of SOC/OC (48.2%) in PM_2.5 was higher in Handan than those (28%–32%) in other megacities, e.g. Beijing, Tianjin and Shijiazhuang in the NCP, suggesting that the formation of SOC contributed significantly to OC. The mean mass absorption efficiencies of EC (MACEC) in PM₁₀ and TSP were 3.4 m² g⁻¹ (1.9–6.6 m² g⁻¹) and 2.9 m² g⁻¹ (1.6–5.6 m² g⁻¹), respectively, both of which had similar variation patterns to those of OC/EC and SOC/OC.

This study aims to acquire a better understanding on the characteristics and risks of heavy metals (HMs) in PM_2.5 from an industrial city – Handan, China.

PM_2.5 samples were collected on the basis of daytime and nighttime at the state controlling air sampling site in Handan city. Ten metal elements (V, Cr, Mn, Fe, Ni, Cu, Rb, Sr, Cd and Ba) in PM_2.5 were determined with an inductively coupled plasma mass spectrometry. The pollution levels of metals were characterized by enrichment factors, and the sources of metals were identified with principle component analysis and cluster analysis. The ecological and health risks of metals were assessed using ecological and health risk indexes.

Results showed that the highest and lowest PM_2.5 concentration appeared in winter and summer, respectively. The concentration of PM_2.5 at night was higher than in the daytime in winter, yet it is the opposite in other seasons. The total mass concentration of detected metals was the highest in winter, and the total mass concentration in the daytime was higher than at night in all four seasons. The elements V, Rb, Sr and Ba exhibited a deficient contamination level; Cr, Ni and Cu exhibited a moderate contamination level; while Fe and Cd were at an extreme contamination level. The metals in PM_2.5 originated from a mixture source of fossil fuel combustion and manufacture and use of metallic substances (34.04%), natural source (26.01%) and construction and traffic-related road dust (17.58%). Results from the ecological risk model showed that the ecological risk of metals was very high, especially risks related to Cd. Health risk model presented that both the non-carcinogenic and carcinogenic risk coefficients of metals were above the tolerance level of the human body.

The significance of the study is to further know the pollution characteristics of PM_2.5 and related HMs in Handan city, and to provide references for ensuring local resident health and ecological environment.

This study aims to investigate the effects of graphite-MoS₂ composite solid lubricant on the tribological properties of copper-based bearing materials under dry conditions.

The mixture of Graphite-MoS₂ was inlaid in ZQSn6-6–3 tin bronze and ZQAl9-4 aluminum bronze matrix. These copper-embedded self-lubricating bearing materials were considered in friction pairs with 2Cr13 stainless steel, and their tribological properties were studied by using an MM200 wear test machine.

The results show that the friction coefficients and wear rates of copper-embedded self-lubricating bearing materials are lower than those of the ordinary copper-based bearing materials. The wear performance of the tin bronze inlaid self-lubricating bearing material is better than that of the aluminum bronze inlaid self-lubricating bearing material. The wear mechanism of the tin bronze bearing material is mainly adhesive wear, and that of the aluminum bronze bearing material is mainly grinding wear, oxidation wear and adhesive wear. The copper-embedded self-lubricating bearing materials had no obvious abrasion, whereas the aluminum bronze inlaid self-lubricating bearing material exhibited deep furrows and obvious abrasion under high loads.

These results are helpful for the application of copper-embedded self-lubricating bearing materials.

This study aims to better understand the morphological characteristics of single particle and the health risk characteristics of heavy metals in PM_2.5 in different functional areas of Handan City.

High resolution transmission electron microscopy was used to observe the aerosol samples collected from different functional areas of Handan City. The morphology and size distribution of the particles collected on hazy and clear days were compared. The health risk evaluation model was applied to evaluate the hazardous effects of particles on human health in different functional areas on hazy days.

The results show that the particulate matter in different functional areas is dominated by spherical particles in different weather conditions. In particular, the proportion of spherical particles exceeds 70% on the haze day, and the percentage of soot aggregates increases significantly on the clear day. The percentage of each type of particle in the teaching and living areas varied less under different weather conditions. Except for the industrial area, the size distribution of each type of particle in haze samples is larger than that on the clear day. Spherical particles contribute more to the small particle size segment. Soot aggregate and other shaped particles contribute more to the large size segment. The mass concentrations of hazardous elements (HEs) in PM_2.5 in different functional areas on consecutive haze pollution days were illustrated as industrial area > traffic area > living area > teaching area. Compared with the other functional areas, the teaching area had the lowest noncarcinogenic risk of HEs. The lifetime carcinogenic risk values of Cr and As elements in each functional area have exceeded residents’ threshold levels and are at high risk of carcinogenicity. Among the four functional areas, the industrial area has the highest carcinogenic and noncarcinogenic risks. But the effects of HEs on human health in the other functional areas should also be taken seriously and continuously controlled.

The significance of the study is to further understand the morphological characteristics of single particles and the health risks of heavy metals in different functional areas of Handan City. the authors hope to provide a reference for other coal-burning industrial cities to develop plans to improve air quality and human respiratory health.

The purpose of this paper is to present the terms of grey numbers and its operations.

The definitions of elementary terms about grey numbers and its operations are presented one by one.

The reader could know the basic explanation about the important terms about grey numbers and its operations from this paper.

Many of the colleagues thought that unified definitions of key terms would be beneficial for both the readers and the authors.

It is a fundamental work to standardise all the definitions of terms for a new discipline. It is also propitious to spread the universal principles of grey system theory.

In the year 2000, a team from Istanbul Technical University (ITU) developed the “Urban m³ - Respect for Life Project”, which was aimed at providing shelter for those people who were left homeless as a consequence of the earthquake in 1999, in the districts of Arizli-Kocaeli in Turkey. This earthquake had a catastrophic effect on one of the most densely populated and industrial regions of Turkey whose population accounts about 20 percent of Turkey's total population. In addition to providing shelter, the major objective of this project was to re-establish those humanistic and natural values that had been lost or obscured in respect of the traditional, Turkish life-style and culture, as a result of the rapid urban-isation which took place after the 1950s. In 2000, research was conducted to evaluate the prospective residents' preferences in respect of their future housing and its environment needs. For this purpose, 400 people, who had been living in temporary housing in the area affected by the earthquake, were the target group of an in-depth survey. The main objective of the study was to determine whether the prospective residents' perceptions and evaluations matched the project designed by the ITU's team. It was assumed within the project planning and design that people would prefer the socially, and physically rich environment offered by the project. Based on the research findings, the ideology, philosophy and concepts underlying the “Urban m³ - Respect for Life Project” could be evaluated as an altenative design approach, which provides not only environmental protection and disaster mitigation, but also a high level of socio-cultural satisfaction. Thus, the paper suggests strategies for improved post-disaster (re-)construction.

Presents a unified information systems theory where stochastic information, fuzzy information, rough information, grey information, unascertained information and white and black information are all special cases. A unified concept of information, named blind information, is introduced. Also, relevant mathematical representations of various types of information are presented.

Numerous smog events have occurred in recent years in China. Their hazards in mining and industrial cities are more serious than clear days. The samples were collected in the mining and industrial city of Handan. During the smog episode, PM₁₀ and PM_2.5 concentrations reach up to 980 μg/m³ and 660 μg/m³, respectively. Under SEM (scanning electron microscope) analysis, the particles consist of soot, fly ash and minerals, which could be from coal mines, power plants, steel mills and auto exhausts. Compared with the samples collected on a clear day, the increased PM₁₀ particles are mainly composed of organic matter, especially aromatic compounds. The Pb content in PM₁₀ of the smog day reaches 507.4 ng/m³ and could be caused by vehicle emissions.

The filling paste blending system is the core part in a paste backfill mining scheme. Its precision directly determines the flow properties and condensation curing performance of the filling slurry, thus it affects the filling effect of the underground mining working face. The research fuzzy PID control algorithm is introduced into the filling paste blending automatic control system in order to achieve a better control effect (Geng, 2007). Detailed introduces fuzzy PID controller design process, through the simulation experiment shows that fuzzy PID controller improves the system of external disturbance, and adapt to the internal parameters change robustness, ensure the precision of the burden system.

The coal bed methane resources distribution of Handan - Fengfeng Mining area has the features of "richness in the midland and north while poorness in the south, and richness in the east while poorness in the west. Through the analysis of the geological factors causing the above phenomena, we get that: the coal metamorphism and hydrogeological condition are the major controlling factors, the former controls the north and south difference of coal bed methane resources distribution from the two aspects covering gas-generated quantity and adsorption capacity, while the latter controls the east and west difference of coal bed methane resources distribution; syncline and good cap rock conditions are necessary conditions for coal bed methane enrichment, but not the reason for causing the difference of coal bed methane resources distribution.