Search results

The purpose of this study is the synthesis and characterization of a CMYK palette (cyan of Cr-BiVO₄, magenta of Pr-CeO₂, yellow of Bi-(Ce,Zr)O₂ composite and black of YMnO₃) as an eco-friendly polyfunctional palette that combines (a) high near-infrared reflectance (cool pigments) that allows moderate temperatures in indoor environments and the urban heat island effect; (b) photocatalytic activity for the degradation of organic contaminants of emerging concern of substrates in solution (such as Orange II or methylene blue) and gaseous (NO_x and volatile organic compounds such as acetaldehyde or toluene); (c) X-ray radiation attenuators associated with bismuth ions; and (d) biocidal effect combined with co-doping with bactericidal agents.

Pigments were prepared by a solid-state reaction and characterized by X-ray diffraction, diffuse reflectance spectroscopy, photocatalytic activity over Orange II and scanning electron microscopy.

The behaviour of the proposed palette was compared to that of a commercial inkjet palette, and an improvement in all functionalities was observed.

The functionalities of pigments allow the building envelope and indoor walls to exhibit temperature-moderating effects (with the additional effects of moderating global warming and increasing air conditioning efficiency), purification and disinfection of both indoor and outdoor air, and radiation attenuation.

The proposed palette and its polyfunctional characterization are novel.

This paper aims to investigate the corrosion resistance of two types of coatings – one is ceria sol coating and the other is ceria sol coating modified by ZnO nanoparticles on 7075 aluminum alloy in 3.5% NaCl solution.

Aluminum alloys were dipped into ceria sol and ceria sol modified by ZnO nanoparticles separately and removed after 10 min from the solutions and dried at 110°C for 30 min and heated at 500 °C for 30 min to form the coatings. The coatings have been characterized by using field emission scanning electron microscopy (FE-SEM), electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS). The EIS tests were performed in a corrosive solution of 3.5% NaCl.

The results showed that the coating of ceria sol modified by ZnO nanoparticles has higher corrosion resistance than the ceria sol coating and the bare sample. Also, the best efficiency is related to aluminum sample immersion after 1 h in NaCl corrosive solution for coating modified by ZnO nanoparticles.

In this research, the modification of ceria sol coating by ZnO nanoparticles had an effect on improving the corrosion behavior of aluminum alloy. It is also understood that modification of coatings is an effective parameter on corrosion resistance.

Properly planned road illumination systems are collectively a public wealth and the commissioning of such systems may require extensive planning, simulation and testing. The purpose of this simulative work is to offer a simple approach to facilitate luminance-based road lighting calculations that can be easier to comprehend and apply to practical designing problems when compared to complex multi-objective algorithms and other convoluted simulative techniques.

Road illumination systems were photometrically simulated with a created model in a validated software platform for specified system design configurations involving high-pressure sodium (HPS) and light-emitting diode (LED) luminaires. Multiple regression analyses were conducted with the simulatively obtained data set to propound a linear model of estimating average luminance, overall uniformity of luminance and energy efficiency of lighting installations, and the simulatively obtained data set was used to explore luminaire power–road surface average luminance characteristics for common geometric design configurations involving HPS and LED luminaires, and four categories of road surfaces.

The six linear equations of the propounded linear model were found to be well-fitted with their corresponding observation sets. Moreover, it was found that the luminaire power–road surface average luminance characteristics were well-fitted with linear trendlines and the increment in road surface average luminance level per watt increment of luminaire power was marginally higher for LEDs.

This neoteric approach of estimating road surface luminance parameters and energy efficiency of lighting installations, and the compendia of luminaire power–road surface average luminance characteristics offer new insights that can prove to be very useful for practical purposes.

This paper aims at analyzing the potential of new materials in magnesium-ion batteries (MIBs) with a particular focus on options for electrodes and electrolyte solutions while also carefully considering the barriers to their entry in this application for MIBs, with a particular focus on the material options for electrodes and electrolyte solutions.

Potential materials for MIBs were examined for sustainability, safety and efficiency to develop the sustainable and well-working MIBs.

For anode materials, the use of Mg-bismuth alloys has shown promise, whereas Chevrel phases or layered molybdenum disulfide have potential as cathode materials. Potential electrolytes range from traditional materials to the development of tailored solid-state and liquid-based options.

This study considers the growing need for Mg-based ion batteries, as well as the need for suitable electrode and electrolyte materials and analyzes suitable options.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2023-0081/

The purpose of this study is to prepare a state-of-the-art review on advanced ceramic materials including their fabrication techniques, characteristics, applications and wettability.

This review paper presents the various types of advanced ceramic materials according to their compounding elements, fabrication techniques of advanced ceramic powders as well as their consolidation, their characteristics, applications and wetting properties. Hydrophobic/hydrophilic properties of advanced ceramic materials are described in the paper with their state-of-the-art application areas. Optical properties of fine ceramics with their intrinsic characteristics are also presented within. Special focus is given to the brief description of application-based manipulation of wetting properties of advanced ceramics in the paper.

The study of wetting/hydrophobicity/hydrophilicity of ceramic materials is important by which it can be further modified to achieve the required applications. It also makes some sense that the material should be tested for its wetting properties when it is going to be used in some important applications like biomedical and dental. Also, these advanced ceramics are now often used in the fabrication of filters and membranes to purify liquid/water so the study of wetting characteristics of these materials becomes essential. The optical properties of advanced ceramics are equally making them suitable for many state-of-the-art applications. Dental, medical, imaging and electronics are the few sectors that use advanced ceramics for their optical properties.

This review paper includes various advanced ceramic materials according to their compounding elements, different fabrication techniques of powders and their consolidation, their characteristics, various application area and hydrophobic/hydrophilic properties.

The purpose of this research is as follows: DPP-BOH-PVA has been synthesized from 1,1′:3′,1″-terphenyl-5'-boronic acid (DPP-OH) and polyvinyl alcohol (PVA). The afterglow lifetime of DPP-BOH-PVA was studied by changing contents of DPP-OH (1, 2 and 4 Wt.%). These films were characterized with Fourier transform infrared, X-ray diffraction as structural analysis and DSC as thermal analysis. Afterglow lifetimes were evaluated as time-resolved emission decay profile analysis. Fiber films of DPP-BOH-PVA-2-E have been prepared by electrospinning method with the diameter of 5 μm and afterglow life time of 2.1 s (@ 535 nm) under ambient conditions. Stimulus responsive properties with afterglow emission for fiber film were investigated.

During the synthesis of the polymer, modification was carried out using DPP-OH/PVA with a molar ratio of 1/4, under an alkalinity medium with ammonium hydroxide and with a temperature of 80°C.

XRD results indicate that DPP-BOH-PVA film had high crystallinity, which is crucial for preparing organic room temperature phosphorescence (RTP) materials.

The reaction mixture must be stirred continuously. Temperature should be controlled to prevent the rapid evaporation of ammonium hydroxide.

This study provides technical information for the synthesis of multidimensional stimulation response RTP micron fiber thin film. The electrospinning technology may also promote the applications of the large areas of RTP films.

This resin will be used for the multidimensional stimulation response RTP fiber thin film.

The diameter of fiber film of PP-BOH-PVA-2-E by electrospinning method was in the range of 5 μm, and its afterglow lifetime decayed to be 2.1 s.

The focus of this study was to evaluate the relationship between research publications in the pesticide field, a country’s gross domestic product (GDP) and GDP per capita. The study aims to analyze pesticide use in association with a country’s population and research publications. The purpose of this study is to uncover the country’s contribution to pesticide research and assess the financial resources allocated to it as a percentage of their GDP by exploring these factors.

The Web of Science database was used to retrieve data for the period of 2001–2020. The use of scientometric indicators allowed for the analysis of the collaborative patterns and active performance of countries in pesticide research. Socio-economic analysis was used to determine the contribution of countries toward pesticide research.

This study demonstrated a strong association (0.952%) between a country’s GDP and its research publications in the field of pesticide research. Countries, such as Denmark, Belgium and Australia, have benefited from global collaboration, which has enhanced their research efforts. Despite ranking lower in pesticide utilization, India focused on pesticide research, as indicated by its high publication/GDP per capita ratio (0.26).

Research on pesticides directly impacts agricultural practices, which, in turn, influence the economic production of the agricultural sector. Changes in pesticide usage can have inference for crop yields, food price and, eventually, the GDP. Comparative analysis can assist in evaluating the efficiency of regulatory policies in balancing ecological concerns with economic interests. Changes in regulations may impact both pesticide usage and economic outcomes.

This study aims to develop two piezoelectric textile devices formed from different weft knitted fabric rapports (Jersey and Pique) to be applied in the renewable energy’s (RE) area.

Two different weft knitted rapports were produced with polyester (PES). The device developed has five layers: a central of poly(vinylidene fluoride) (PVDF) nonwoven, involved by two insulating layers of PES knitted fabric; and two conductive external layers, made of polypyrrole-coated PES knitted fabric. The piezoelectric textile devices were joined by sewing the five layers of the device.

The FTIR technique confirmed the β-phase in the PVDF nonwoven. This study produced and tested two different textiles devices with piezoelectric behavior, confirmed by the correlated pattern of voltage and tensile stress difference curves, showing the potential application in RE’s and sustainable energies field as smart textiles, such as devices incorporated in garments in the areas of high movement (elbow, knee, foot, fingers and hands, among others), and as an energy generator device

Textile materials with piezoelectric properties promise to advance RE’s developments due to their high material flexibility and sensitivity to the electrical response. The knitted fabric technology presents flexibility due to its construction process. Comparative studies analyzing the electrical response between knitted and woven fabrics have already been realized. However, there is a gap in terms of research scientific research regarding the comparison of the piezoelectric effect in a material that presents different knitted fabric rapports.