Search results

This paper comprehensively addresses the influence of chopped strand mat glass fiber-reinforced polymer (GFRP) patch configurations such as geometry, dimensions, position and the number of layers of patches, whether a single or double patch is used and how well debonding the area under the patch improves the strength of the cracked aluminum plates with different crack lengths.

Single-edge cracked aluminum specimens of 150 mm in length and 50 mm in width were tested using the tensile test. The cracked aluminum specimens were then repaired using GFRP patches with various configurations. A three-dimensional (3D) finite element method (FEM) was adopted to simulate the repaired cracked aluminum plates using composite patches to obtain the stress intensity factor (SIF). The numerical modeling and validation of ABAQUS software and the contour integral method for SIF calculations provide a valuable tool for further investigation and design optimization.

The width of the GFRP patches affected the efficiency of the rehabilitated cracked aluminum plate. Increasing patch width WP from 5 mm to 15 mm increases the peak load by 9.7 and 17.5%, respectively, if compared with the specimen without the patch. The efficiency of the GFRP patch in reducing the SIF increased as the number of layers increased, i.e. the maximum load was enhanced by 5%.

This study assessed repairing metallic structures using the chopped strand mat GFRP. Furthermore, it demonstrated the superiority of rectangular patches over semicircular ones, along with the benefit of using double patches for out-of-plane bending prevention and it emphasizes the detrimental effect of defects in the bonding area between the patch and the cracked component. This underlines the importance of proper surface preparation and bonding techniques for successful repair.

This paper focuses on dry port as a key notion in port-hinterland development. We first discuss the concept of dry port by reviewing existing literature. Then, we explore the reasons behind the emergence and development of inland node systems in different geographical, economic and institutional contexts. Next, the paper presents a classification of dry ports based on a multitude of factors and dimensions and the respective benefits to different parties. The study then focuses on the specific characteristics of dry ports and associated transport networks in developing countries.

In the last part, we present a case study on the dry port system in Vietnam by reviewing the seaport and inland transport system and analyzing the current status of inland terminals in Vietnam. To conclude, a SWOT analysis is presented with regard to the development of the dry port network in Vietnam, followed by recommendations for policy makers.

In the 21^st Century, a region 's growth and prosperity will depend upon its intermodal transportation infrastructure and its ability to efficiently move goods, materials, and people within the system whether it be from origin to destination; from supplier to customer through the various levels of the supply-chain; or from point to point within the system. Planning for the future focuses on improving a region 's intermodal transportation system efficiencies and infrastructure, its connection to other economies, and on the development of logistics institutions and facilities.

With China 's rapidly developing economy and society, record numbers of new modern facilities such as airports, ports, highways, logistics parks and warehouses are being built. Along with this, companies have made extensive investments in information technologies and software to support the tremendous growth that has taken place in the logistics industry. The development and improvement of China's historic inland water transport system is essential to their continued future growth and prosperity. In Korea, past and present National Governments have emphasized the importance of developing a North East Asian Logistics and Business Hub in their region and have worked on strategies, which include water transport, as part of an important national agenda to that end.

This article looks at how trade flows in the Yangtze and Yellow Sea Regions and between China and South Korea might be enhanced by application of improved shipping methods in marine commerce that will promote economic growth in the region. The application of logistics practices and use of barges is explored for the movement of containers on inland and coastal waterways as well as in short sea shipping which could greatly facilitate the region 's situation with respect to future economic growth.

Recently, deep learning (DL) has been widely applied in various aspects of human endeavors. However, studies have shown that DL models may also be a primary cause of data leakage, which raises new data privacy concerns. Membership inference attacks (MIAs) are prominent threats to user privacy from DL model training data, as attackers investigate whether specific data samples exist in the training data of a target model. Therefore, the aim of this study is to develop a method for defending against MIAs and protecting data privacy.

One possible solution is to propose an MIA defense method that involves adjusting the model’s output by mapping the output to a distribution with equal probability density. This approach effectively preserves the accuracy of classification predictions while simultaneously preventing attackers from identifying the training data.

Experiments demonstrate that the proposed defense method is effective in reducing the classification accuracy of MIAs to below 50%. Because MIAs are viewed as a binary classification model, the proposed method effectively prevents privacy leakage and improves data privacy protection.

The method is only designed to defend against MIA in black-box classification models.

The proposed MIA defense method is effective and has a low cost. Therefore, the method enables us to protect data privacy without incurring significant additional expenses.

Due to its fast growth, cross-border e-commerce (CBEC) is becoming a popular internationalization model, especially in those destination markets with impressive e-commerce development like China. However, CBEC also brings new logistics challenges and uncertainty. This paper aims to understand how companies cope with logistics uncertainty in this field and whether the different types of uncertainty influence the risk management strategies adopted to face them.

A survey targeting online exporters to China and third-party forwarding logistics service providers (3PFLs) is conducted. A structural equation model (SEM) analysis is performed to test the possible relationship between the adopted risk management strategies and the types of uncertainty. The type, industry and size of the company, as well as the distance between the company's home country and China, are used as control variables in the study. Survey results are enriched via interviews with some of the respondents.

The risk management strategies adopted are dependent on the type of logistics uncertainty that the companies face and, to a minor extent, on the industry the company operates in. Conversely, no significant influence is exerted by other types of control factors, i.e. home country, company size or company type.

The paper investigates logistics uncertainty and risk management approaches in the novel context of CBEC. A systematic review of relevant sources of uncertainty is offered to help both scholars and practitioners understand the current complexities of CBEC. From a theoretical perspective, the paper models the investigated concepts in light of the contingency approach. From a practical perspective, results can be of interest since the list of proposed items can support risk identification and evaluation while the interviews with managers can provide insights on risk management practices.

The e-freight program launched by the International Air Transport Association (IATA) has gradually become a standard specification for international air freight operations. This study examined critical factors affecting air freight forwarders’ decision to adopt the IATA e-freight using a technology-organization-environment model with air freight forwarders in Taiwan as the base. Our findings show that ‘information technology (IT) competence’, ‘trading partner pressure’, ‘government policy’ and ‘competitive pressure’ all have significant positive effects on air freight forwarders’ decision to adopt the e-freight and the top three factors among these are ‘government funding’, ‘government’s active promotion’ and ‘government’s requirement of electronic air waybill (e-AWB)’. Finally, this study proposes strategies that can encourage air freight forwarders to decide on e-freight adoption for the information of relevant oK regyawniozradtison International Air Transport Association (IATA); IATA e-freight; Technology organization environment model; Air freight forwarder

This paper claims to identify the behavioral and cultural features that push to use, or not, cryptocurrencies for electronic commerce. Indeed, despite the use of cryptocurrencies for electronic commerce spreading worldwide at a fast and growing pace, there are supporters and detractors among their users. The analysis of what distinguish these two groups of users is fundamental for understanding their different intention to use cryptocurrencies for electronic commerce.

A survey has been administered to 2,532 cryptocurrencies’ users across the USA and China, collecting data on their behavioral predispositions and cultural features. Results were then analyzed through structured equation modeling.

Results showed that while attitude, subjective norms, perceived behavioral control and herding behavior have a positive impact on the intention to use cryptocurrencies for electronic commerce, financial literacy has no influence. Cultural dimensions amplified or reduced the discovered relationships and caused different effects: positive for the USA and negative for China when considering illegal attitude and perceived risk.

Theory of planned behavior, financial behavior and cultural factors can, all together, represent a useful framework for envisioning the behavior of users in adopting cryptocurrencies for electronic commerce purposes through a test of all its elements. To the best of the authors’ knowledge, this is the first study considering behavior and cultural variables on the intention to use cryptocurrencies for electronic commerce as well as being the largest carried out, in terms of sample, on the cryptocurrency topic.

The Incheon Region has numerous assets that fall within a Pentaport model.' These include the Incheon International Airport, the Port of Incheon, a coastal industrial park, free economic zones, a leisure port, and Songdo new town designed to be the future Silicon Valley of Korea. This paper looks at how Northeast Asia trade flows between China and Korea might be enhanced by application of the Pentaport model in making the Incheon region a North East Asian Hub. It looks also at their trade and logistics systems as well as their water borne commerce. It proposes an integrated transportation system for the Yellow Sea Region being beneficial to the economies of the Northeast Asia. It also stresses that innovative technologies for ships, terminals and cargo handling systems should be introduced to develop a competitive short sea shipping system in the region and cooperation among the regional countries will be essential to achieve the final goal. The potential of methods of container shipping is discussed as it might apply to short sea shipping in the Yellow Sea Region that could greatly facilitate Incheon's situation with respect to the broader region in application of the Pentaport model.

The brake controller is a key component of the locomotive brake system. It is essential to study its safety.

This paper summarizes and analyzes typical faults of the brake controller, and proposes four categories of faults: position sensor faults, microswitch faults, mechanical faults and communication faults. Suggestions and methods for improving the safety of the brake controller are also presented.

In this paper, a self-judgment and self-learning dynamic calibration method is proposed, which integrates the linear error of the sensor and the manufacturing and assembly errors of the brake controller to solve the output drift. This paper also proposes a logic for diagnosing and handling microswitch faults. Suggestions are proposed for other faults of brake controller.

The methods proposed in this paper can greatly improve the usability of the brake controller and reduce the failure rate.

With the aid of naturalistic simulations, this paper aims to investigate human behavior during manual and autonomous driving modes in complex scenarios.

The simulation environment is established by integrating virtual reality interface with a micro-simulation model. In the simulation, the vehicle autonomy is developed by a framework that integrates artificial neural networks and genetic algorithms. Human-subject experiments are carried, and participants are asked to virtually sit in the developed autonomous vehicle (AV) that allows for both human driving and autopilot functions within a mixed traffic environment.

Not surprisingly, the inconsistency is identified between two driving modes, in which the AV’s driving maneuver causes the cognitive bias and makes participants feel unsafe. Even though only a shallow portion of the cases that the AV ended up with an accident during the testing stage, participants still frequently intervened during the AV operation. On a similar note, even though the statistical results reflect that the AV drives under perceived high-risk conditions, rarely an actual crash can happen. This suggests that the classic safety surrogate measurement, e.g. time-to-collision, may require adjustment for the mixed traffic flow.

Understanding the behavior of AVs and the behavioral difference between AVs and human drivers are important, where the developed platform is only the first effort to identify the critical scenarios where the AVs might fail to react.

This paper attempts to fill the existing research gap in preparing close-to-reality tools for AV experience and further understanding human behavior during high-level autonomous driving.

This work aims to systematically analyze the inconsistency in driving patterns between manual and autopilot modes in various driving scenarios (i.e. multiple scenes and various traffic conditions) to facilitate user acceptance of AV technology.

A close-to-reality tool for AV experience and AV-related behavioral study. A systematic analysis in relation to the inconsistency in driving patterns between manual and autonomous driving. A foundation for identifying the critical scenarios where the AVs might fail to react.