Search results

This paper aims to investigate the corrosion resistance of two types of coatings – one is ceria sol coating and the other is ceria sol coating modified by ZnO nanoparticles on 7075 aluminum alloy in 3.5% NaCl solution.

Aluminum alloys were dipped into ceria sol and ceria sol modified by ZnO nanoparticles separately and removed after 10 min from the solutions and dried at 110°C for 30 min and heated at 500 °C for 30 min to form the coatings. The coatings have been characterized by using field emission scanning electron microscopy (FE-SEM), electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS). The EIS tests were performed in a corrosive solution of 3.5% NaCl.

The results showed that the coating of ceria sol modified by ZnO nanoparticles has higher corrosion resistance than the ceria sol coating and the bare sample. Also, the best efficiency is related to aluminum sample immersion after 1 h in NaCl corrosive solution for coating modified by ZnO nanoparticles.

In this research, the modification of ceria sol coating by ZnO nanoparticles had an effect on improving the corrosion behavior of aluminum alloy. It is also understood that modification of coatings is an effective parameter on corrosion resistance.

This study’s aim is to introduce a high-performance sorbent for the removal of both anionic (Congo red; CR) and cationic (methylene blue; MB) dyes from aqueous solutions.

Sodium silicate is adopted as a substrate for GO and AgNPs with positive charge are used as modifiers. The synthesized nanocomposite is characterized by FTIR, FESEM, EDS, BET and XRD techniques. Then, some of the most effective parameters on the removal of CR and MB dyes such as solution pH, sorbent dose, adsorption equilibrium time, primary dye concentration and salt effect are optimized using the spectrophotometry technique.

The authors successfully achieved notable maximum adsorption capacities (Qmax) of CR and MB, which were 41.15 and 37.04 mg g⁻¹, respectively. The required equilibrium times for maximum efficiency of the developed sorbent were 10 and 15 min for CR and MB dyes, respectively. Adsorption equilibrium data present a good correlation with Langmuir isotherm, with a correlation coefficient of R2 = 0.9924 for CR and R2 = 0.9904 for MB, and kinetic studies prove that the dye adsorption process follows pseudo second-order models (CR R2 = 0.9986 and MB R2 = 0.9967).

The results showed that the proposed mechanism for the function of the developed sorbent in dye adsorption was based on physical and multilayer adsorption for both dyes onto the active sites of non-homogeneous sorbent.

The as-prepared nano-adsorbent has a high ability to remove both cationic and anionic dyes; moreover, to the high efficiency of the adsorbent, it has been tried to make its synthesis steps as simple as possible using inexpensive and available materials.

This study aims to investigate the behavior of the green biomass-derived copper (lignin/silica/fatty acids) complex, copper lignin/silica/fatty acids (Cu-LSF) complex, when incorporated into the nonpolar ethylene propylene diene (EPDFM) rubber matrix, focusing on its reinforcing and antioxidant effect on the resulting EPDM composites.

The structure of the prepared EPDM composites was confirmed by Fourier-transform infrared spectroscopy, and the dispersion of the additive fillers and antioxidants in the EPDM matrix was investigated using scanning electron microscopy. Also, the rheometric characteristics, mechanical properties, swelling behavior and thermal gravimetric analysis of all the prepared EPDM composites were explored as well.

Results revealed that the Cu-LSF complex dispersed well in the nonpolar EPDM rubber matrix, in thepresence of coupling system, with enhanced Cu-LSF-rubber interactions and increased cross-linking density, which reflected on the improved rheological and mechanical properties of the resulting EPDM composites. From the various investigations performed in the current study, the authors can suggest 7–11 phr is the optimal effective concentration of Cu-LSF complex loading. Interestingly, EPDM composites containing Cu-LSF complex showed better antiaging performance, thermal stability and fluid resistance, when compared with those containing the commercial antioxidants (2,2,4-trimethyl-1,2-dihydroquinoline and N-isopropyl-N’-phenyl-p-phenylenediamine). These findings are in good agreement with our previous study on polar nitrile butadiene rubber.

The current study suggests the green biomass-derived Cu-LSF complex to be a promising low-cost and environmentally safe alternative filler and antioxidant to the hazardous commercial ones.

The purpose of this research is to analyse the accessibility of Spanish beaches for blind people and their guide dogs as an inclusive tourist destination for national and international tourists.

This empirical research used a quantitative and qualitative methodology from public and private organizations, which intends to give voice to blind people to improve their quality of life.

This study presents a new and surprising contribution to the issue of accessibility of beaches for blind people and future studies related to this topic. Findings revealed that Spain has only nine adapted beaches for blind people, and most Spanish tourist destinations exclude blind people and its guide dogs from enjoying the beach and the sun and their facilities. In Spain there are in total 3,547 beaches; 10.3% of these are adapted beaches for people with reduced mobility, whereas only 0.25% are adapted beaches for blind people. Indeed, results also suggest that more efforts are required in response to the needs of blind people in tourism and transport activities by researchers, academics and government bodies.

The contribution of this paper is especially important for the management of the accessibility of Spanish beaches for blind people and their guide dogs by public and private organizations.

这项实证研究采用了来自公共和私人组织的定量和定性方法, 旨在让盲人发声以改善他们的生活质量。

本研究的目的是分析作为国内和国际游客包容性旅游目的地的西班牙海滩对盲人及其导盲犬的可达性。

这项研究对盲人的海滩可达性和与该主题相关的未来研究提出了新的和令人惊讶的贡献。 调查结果显示, 西班牙只有9个适合盲人的海滩, 大多数西班牙旅游目的地都将盲人及其导盲犬排除在享受海滩和阳光及其设施外。 西班牙共有 3,547 个海滩, 其中 10.3% 是适合行动不便人士使用的海滩, 而只有 0.25% 是适合盲人使用的海滩。 事实上, 结果还表明, 研究人员、学术界、政府机构、私营企业以及一个更加公平、团结和慷慨的社会需要做出更多努力来满足盲人在旅游和交通活动中的需求。

本文的贡献对于公共和私人组织管理盲人及其导盲犬在西班牙海滩的可达性尤为重要。

El objetivo de esta investigación es analizar la accesibilidad de las playas españolas para personas ciegas y sus perros guía como destino turístico inclusivo para turistas nacionales e internacionales.

Esta investigación utilizó una metodología cuantitativa y cualitativa apoyada con datos de organizaciones públicas y privadas, con la finalidad de dar voz a las personas ciegas para mejorar su calidad de vida.

Este estudio presenta una nueva y sorprendente contribución sobre la accesibilidad de las playas para personas ciegas y futuros estudios relacionados con este tema. Los resultados revelaron que España tiene solo 9 playas adaptadas para invidentes, la mayoría de los destinos turísticos españoles están excluyendo a las personas invidentes y sus perros guía para disfrutar de la playa y el sol, y de sus instalaciones. En España hay un total de 3.547 playas, el 10,3% son playas adaptadas para personas con movilidad reducida, mientras que solo el 0,25% son playas adaptadas para invidentes. De hecho, los resultados también sugieren que se requieren más esfuerzos en respuesta a las necesidades de las personas ciegas en las actividades de turismo y transporte por parte de investigadores, académicos, organismos gubernamentales, empresas privadas y una sociedad más justa, solidaria y generosa.

La contribución de este trabajo es especialmente importante para la gestión de la accesibilidad de las playas españolas para personas ciegas y sus perros guía por parte de organismos públicos y privados.

Financial inclusion in Peru has been addressed through coverage, quality of financial services, movement of transactions, and service points. The purpose of this chapter is to evaluate for the department of Ancash, Peru, the link between financial inclusion and its socioeconomic factors. Socioeconomic variables and financial inclusion of the Ancash department of the National Household Survey are taken as indicators, later contrasted through the logit model, with the financial inclusion variable being the explained variable.

There is evidence of positive and negative relationships between financial inclusion and socioeconomic variables; these are important components for planning financial inclusion. Raising the levels of formal employment, the educational level and considering the area of residence would be a strategy to generate a dynamic of inclusion in the department of Ancash.

This paper aims to focus on a medical goods distribution problem and pharmacological waste collection by plug-in hybrid vehicles with some real-world restrictions. In this research, considering alternative energy sources and simultaneous pickup and delivery led to a decrease in greenhouse gas emissions and distribution costs, respectively.

Here, this problem has been modeled as mixed-integer linear programming with the traveling and energy consumption costs objective function. The GAMS was used for model-solving in small-size instances. Because the problem in this research is an NP-hard problem and solving real-size problems in a reasonable time is impossible, in this study, the artificial bee colony algorithm is used.

Then, the algorithm results are compared with a simulated annealing algorithm that recently was proposed in the literature. Finally, the results obtained from the exact solution and metaheuristic algorithms are compared, analyzed and reported. The results showed that the artificial bee colony algorithm has a good performance.

In this paper, medical goods distribution with pharmacological waste collection is studied. The paper was focused on plug-in hybrid vehicles with simultaneous pickup and delivery. The problem was modeled with environmental criteria. The traveling and energy consumption costs are considered as an objective function.

In the developing field of nano-materials synthesis, copper oxide nanoparticles (NPs) are deemed to be one of the most significant transition metal oxides because of their intriguing characteristics. Its synthesis employing green chemistry principles has become a key source for next-generation antibiotics attributed to its features such as environmental friendliness, ease of use and affordability. Because they are more environmentally benign, plants have been employed to create metallic NPs. These plant extracts serve as capping, stabilising or hydrolytic agents and enable a regulated synthesis as well.

Organic chemical solvents are harmful and entail intense conditions during nanoparticle synthesis. The copper oxide NPs (CuO-NPs) synthesised by employing the green chemistry principle showed potential antitumor properties. Green synthesised CuO-NPs are regarded to be a strong contender for applications in the pharmacological, biomedical and environmental fields.

The aim of this study is to evaluate the anticancer potential of CuO-NPs plant extracts to isolate and characterise the active anticancer principles as well as to yield more effective, affordable, and safer cancer therapies.

This review article highlights the copper oxide nanoparticle's biomedical applications such as anticancer, antimicrobial, dental and drug delivery properties, future research perspectives and direction are also discussed.

The purpose of this paper is to offer an accessible and interdisciplinary research strategy in organisational ethnography, called action ethnography, that acknowledges key concepts from action research and engaged and immersive ethnography. It aims to encourage methodological innovation and an impact turn in ethnographic practice.

A working definition of “action ethnography” is provided first. Then, to illustrate how an action ethnography can be designed by considering impact from the outset, the author draws on a study she is undertaking with a grassroots human rights monitoring group, based in England, and then discusses advantages and limitations to the approach.

The author suggests three main tenets to action ethnography that embrace synergies between action research and ethnography: researcher immersion, intervention leading to change and knowledge contributions that are useful to both practitioners and researchers.

This paper provides researchers who align with aspects of both action research and ethnography with an accessible research strategy to employ, and a better understanding of the interplay between the two approaches when justifying their research designs. It also offers an example of designing an action ethnography in practice.

Whereas “traditional” ethnography has emphasised a contribution to theoretical knowledge, less attention has been on a contribution to practice and to those who ethnographers engage with in the field. Action ethnography challenges researchers to consider the impact of their research from the outset during the research design, rather upon reflection after a study is completed.

At the moment, in terms of both research and commercial products, smart shoe technology and applications seem not to attract the same magnitude of attention compared to smart garments and other smart wearables such as wrist watches and wrist bands. The purpose of this study is to fill this knowledge gap by discussing issues regarding smart shoe sensing technologies, smart shoe sensor placements, factors that affect sensor placements and finally the areas of smart shoe applications.

Through a review of relevant literature, this study first and foremost attempts to explain what constitutes a smart shoe and subsequently discusses the current trends in smart shoe applications. Discussed in this study are relevant sensing technologies, sensor placement and areas of smart shoe applications.

This study outlined 13 important areas of smart shoe applications. It also uncovered that majority of smart shoe functionality are physical activity tracking, health rehabilitation and ambulation assistance for the blind. Also highlighted in this review are some of the bottlenecks of smart shoe development.

To the best of the authors’ knowledge, this is the first comprehensive review paper focused on smart shoe applications, and therefore serves as an apt reference for researchers within the field of smart footwear.

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.