Search results

The purpose of this paper is to design and measure an H‐plane substrate integrated waveguide (SIW) 72 GHz backfired horn antenna chip. The SIW horn was fabricated on a standard 0.5‐μm GaAs process with substrate thickness of 100 μm.

Planar SIW horn design method with standard GaAs circuit design rule was adopted. The input reflection coefficient and output antenna gain was simulated at the FEM‐based 3D full‐wave EM solver, Ansoft HFSS and measured at the Agilent E8361C Network Analyzer and Cascade 110 GHz probe station.

The measured input −6 dB bandwidth is about 0.9 GHz at a center frequency of 72.39 GHz. The maximum antenna power gain extracted from the path loss at 72.39 GHz is about −3.64 dBi.

Thin substrate exhibits larger capacitance and energy stores rather than radiates. Flat cutting restricts the arc lens design and results in the radiation plane mismatches to the air. Simple taper transition design makes the input bandwidth much narrower. The problems can be further improved by selecting thicker substrate and the multi‐section input CPW GSG pads to microstrip transition.

Unlike the traditional anechoic chamber, the antenna measurement station is exposed to the open space and chip antenna was supported by the FR4 substrate and the metal probing station plate. A fully characterization of the antenna open space environment before the measurement is needed.

An H‐plane SIW 72 GHz horn antenna was designed and studied. The antenna was using the GaAs 0.5‐μm MMICs process design rule includes the SIW designed cylindrical metal bars all being restricted in standard rectangular shape. Compare to traditional bulky waveguide horn antenna, the antenna chip size is only 1.8×1.7 mm². The on‐wafer measurement is conducted to measure the input return loss and the maximum antenna power gain of the on‐chip antenna. The designed on‐chip SIW horn antenna is useful for the integrated design of the E band GaAs MMICs single‐chip RF transceiver.

Use of thin film microstrip patch antenna for leaf moisture studies.

In this paper, the studies on the effect of leaf used as in‐touch overlay on thin film microstrip patch antenna in the X band (8‐12 GHz) is reported. The patch was used as the transmitting antenna and a pyramidal horn antenna was the receiving antenna. Three leaves Furcarea Gigantea, Kalanchoe Pinnata and Cereus Prerogonus have been used as overlay. All these leaves have high chlorophyll content, but are different in their surface texture and rate of moisture loss.

Size of leaf, orientation with respect to direction of propagation and moisture content dependent changes in the patch antenna output are observed. When the size of the overlay is larger than the patch and the feedline is in contact with it, frequency changes are more, whereas when only patch is in contact with the leaf, amplitude changes are more. Thin film microstrip antenna can provide a means for sensing moisture content in leafy vegetation.

The study of moisture effects of leafy vegetation using the technique of in‐touch overlay on microstrip components can be used to generate data base about the plant conditions in various places.

This paper aims to present the design, fabrication and analysis of a wideband, enhanced gain 1 × 2 patch antenna array with a simple profile structure to meet the desired antenna traits, such as wide bandwidth, high gain and directional patterns expected for the upcoming fifth-generation (5G) wireless applications in the millimeter wave band. To enhance these parameters (bandwidth and gain), a new antenna geometry by using a T-junction power divider is presented.

The theory behind this paper is connected with advancements in the 5G communications related to antennas. The methodology used in this work is to design a high gain array antenna and to identify the best possible power divider to deliver the power in an optimized way. The design methodology adopts several steps like the selection of proper substrate material as per the design specification, size of the antenna as per the frequency of operation and application-specific environment condition. The simulation has been performed on the designed antenna in the electromagnetic simulation tool (high-frequency structure simulator [HFSS]), and optimization has been done with parametric analysis, and then the final array antenna model is proposed. The proposed array contains 2-patch elements excited by one port adapted to 50 Ω through a T-junction power divider. The 1 × 2 array configuration with the suggested geometry helps to improve the overall gain of the antenna, and the implementation of the T-junction power divider provides enhanced bandwidth. The proposed array designed using a 1.6 mm thick flame retardant substrate occupies a compact area of 14 × 12.14 mm².

The prototype of the array antenna is fabricated and measured to validate the design concept. A good agreement has been reached between the measured and simulated antenna parameters. The measured results confirm its wideband and high gain characteristics, covering 24.77–28.80 GHz for S₁₁= –10 dB with a peak gain of about 15.16 dB at 27.65 GHz.

The proposed antenna covers the bandwidth requirements of the 26 GHz n258 band (24.25–27.50 GHz) to be deployed in the UK and Europe. The suggested antenna structure also covers the federal communications commission (FCC)-regulated 28 GHz n261 band (27.5–28.35 GHz) to be deployed in America and Canada. The low profile, compact size, simple structure, wide bandwidth, high gain and desired directional radiation patterns confirm the applicability of the suggested array antenna for the upcoming 5 G wireless systems.

Propagation characteristics of millimeter wave (mmW) frequencies that are being explored for implementing 5G network are quite different from sub 3GHz frequencies in which 4G network is operating, and hence antenna design for mmW 5G network is going to be significantly different. The purpose of this paper is to bring forth the unique challenges and opportunities of planar antenna design for mmW 5G network.

A lot of notable contemporary work has been investigated for this study and reported in this paper. A comparison of 4G and 5G technologies has been carried out to understand the difference between the air interface of two technologies that governs the antenna design. Important research gaps found after collating the work already done in the field have been bullet pointed for the use by many researchers working in this direction.

Several antenna design considerations have been laid out by the authors of this work, and it has been claimed that mmW 5G antenna design must satisfy these design considerations. In addition, prominent research gaps have been identified and thoroughly discussed.

As research in the field of mmW antenna design for 5G applications is still evolving, a lot of work is currently being done in this area. This study can prove to be important in understanding different challenges, opportunities and current state-of-art in the field of mmW planar antenna design for 5G cellular communication.

THE YG‐1081 COLLISION WARNING SYSTEM (CWS) introduced by Honeywell Inc. operates on a cooperative basis with other aircraft with like equipment. The system is, in effect, a C‐band (5·08 GHz) pulse beacon ranging system. Each CWS serves both on interrogation and response function. There are three modes of operation: the interrogation mode, the response mode, and the system test mode.

A Selection of Equipment of Use in the Production and Maintenance of Aircraft, Missiles, Space Vehicles and Components. A new ultrasonic cleaner capable of removing contaminants from the surfaces and crevices of metal‐lographic and petrographic specimens in a matter of seconds is now being marketed by Shandon Scientific Company Ltd. Based in principle on the well‐known Buehler cleaner which has been outstandingly successful in world‐wide use for a number of years, the new AB Ultramet Sonic Cleaner is of completely new design, embodying the most recent advances in materials application and manufacturing technique.