Search results

The purpose of this paper is to propose a fast, accurate and efficient algorithm for assessment of input impedance and consequently the evaluation of transient impedance of the grounding electrode.

The mathematical model is based on the thin wire antenna theory and related Pocklington integro-differential equation in the frequency domain, which is numerically treated via Galerkin-Bubnov variant of the indirect boundary element method (GB-IBEM). Two different approaches, scattered voltage method (ScVM) and induced electromotive force – boundary element method (IEMF-BEM), for input and transient impedance are discussed in detail. Extensive numerical experiments have been undertaken to analyze numerical sensitivity of the methods.

Although it was widely used so far, the ScVM, was shown to be unsuitable for the grounding impedance assessment because results are dependent on the number of elements used in the numerical solution. On the other hand, the other method, IEMF-BEM is rather stable, with the respect to the number of elements used and with excellent convergence rate. In addition, IEMF-BEM is much simpler to implement as it requires only multiplication of matrices already assembled within the procedure of current distribution calculation, as opposed to the ScVM which requires numerical integration of quasi-singular integrals which, by it self, can be very demanding.

The IEMF-BEM is originally developed by the authors and used for the first time for grounding impedance assessment. It is simple and very efficient and can easily be extended to arbitrary grounding configurations.

The purpose of the paper was to design an anti-corrosion system that combined conductive coatings with cathodic protection for a 500-kV substation ground grid, and provide a basis for the anti-corrosion construction of the installation.

The study took the Shaoguan 500-kV substation grounding grid as the research object. The anti-corrosion performance of KV conductive coatings on grounding metal was researched. In parallel, the alkalinity of substation soil was evaluated according to the German DIN50929 Standard, and the combined protection system comprising conductive coatings and impressed current cathodic protection was designed.

KV conductive coatings, that have resistance to acids, alkalis and salts, can effectively slow down the corrosion rate of the grounding grid. The investigation also provided the outline design, installation, construction requirements and monitoring methods for the 500-kV substation grounding grid.

This report contains some guiding significance for anti-corrosion engineering of 500-kV substation grounding grids.

In this paper a numerical simulation analysis of a modified stent-based electrode is introduced to be used as a bipolar electrode for radio frequency ablation of tumours located in hollow organs. The purpose of this paper is to study the possibility of achieving a more regular volume of induced lesion with the presented electrode without imperilling the ductal organ where the tumour is located.

Three types of bipolar electrode configurations were considered, formed by two, three and five tubular segments. Numerical simulations were performed considering a tumour located in the bile duct, where two important blood vessels – the portal vein and the hepatic artery – have a significant impact due to the convective heat transfer caused by the blood flow (heat sink effect) which significantly affects the shape of lesion that is intended to induce in order to destroy the tumour.

The results obtained show that the five-segment electrode arrangement allows a regular volume for the induced lesion, independently of the different values of applied voltage considered.

The presented work introduces a numerical simulation analysis on a modified based-stent electrode previously studied. In this case, the electrode is configured so it can be used as a bipolar electrode, i.e., active and ground electrode are placed in the same device. Besides the results evinced by the obtained results, this kind of electrode avoids eventual skin burns that might occur due to the need of the return electrodes when monopolar electrodes are used.

While the transference of charge is an essential aspect of every capacitance sensor, a relatively new form of sensor makes overt use of the principle of charge conservation first deduced by Watson in the 1740s. Updated to use a microcontroller, mosfet switches, fet‐input opamps and band gap references, the principle of charge transference can be used to create an extremely sensitive and stable device with unique properties that transcend those of more pedestrian capacitance sensors. Also known as “QT” sensors, charge transfer sensors can have a dynamic range spanning many decades with noise floors in the sub‐femtofarad regime, allowing differential resolutions of mere fractions of a femtofarad. Such sensors are proving to have unique applications considered heretofore impossible, while also proving themselves as replacements for much more expensive sensing systems using photoelectric, acoustic, RF, and optical imaging techniques.

The purpose of this paper is to present the sensing mechanism, design issues, performance evaluation and applications for planar capacitive sensors. In the context of characterisation and imaging of a dielectric material under test (MUT), a systematic study of sensor modelling, features and design issues is needed. In addition, the influencing factors on sensitivity distribution, and the effect of conductivity on sensor performance need to be further studied for planar capacitive sensors.

While analytical methods can provide accurate solutions to sensors of simple geometries, numerical modelling is preferred to obtain sensor response to different design parameters and properties of MUT, and to derive the sensitivity distributions of various electrode designs. Several important parameters have been used to evaluate the response of the sensors in different sensing modes. The designs of different planar capacitive sensor arrays are presented and experimentally evaluated.

The response features and design guidelines for planar capacitive sensors in different sensing modes have been summarised, showing that the sensor in the transmission mode or the single‐electrode mode is suitable for material characterisation and imaging, while the sensor in the shunt mode is suitable for proximity/displacement measurement. The sensitivity distribution of the sensor depends largely on the geometry of the electrodes. Conductivity causes positive changes for the sensor in the transmission and single‐electrode mode, but negative changes for the sensor in the shunt mode. Experimental results confirm that sensing depths of the sensor arrays and the influence of buried conductor on capacitance measurements are in agreement with simulations.

Experimental verification is needed when a sensor is designed.

This paper provides a comprehensive study for planar capacitive sensors in terms of sensor design, evaluation and applications.

The purpose of this paper is to present a dual-mode proximity sensor composed of inductive and capacitive sensing modes, which can help the robot distinguish different objects and obtain distance information at the same time. A systematic study of sensor response to various objects and the function of cooperation sensing is needed. Furthermore, the application in the field of robotic area needs to be discussed.

Numerical modeling of each sensing modes and simulations based on finite element analysis method has been carried out to verify the designed dual-mode sensor. A number of objects composed of different materials are used to research the cooperation perception and proximity sensing functions. In addition, the proposed sensor is used on the palm of a mechanical hand as application experiment.

The characteristics of the sensor are summarized as follows: the sensing range of inductive mode is 0-5.6 mm for detecting a copper block and the perceive range of capacitive mode is 0-5.1 mm for detecting a plastic block. The collaborative perceive tests validated that the non-ferromagnetism metals can be distinguished by inductive mode. Correspondingly, ferromagnetism metals and dielectric objects are differentiated by capacitive mode. Application experiments results reveal that both plastic bottle and steel bottle could be detected and differentiated. The experimental results are in agreement with those of simulations.

This paper provides a study of dual-mode proximity sensor in terms of design, experiments and application.

The aim of the paper is to present the results of investigations of fine particle generation by small biomass combustion and the possibility of reducing the emissions by electrostatic precipitation.

The grains, wood‐logs, wood‐, mixed‐ and straw‐pellets were combusted in two stoves and two boilers. The set‐ups were operated according to DIN‐4702. Particle number concentration in the gas flow was measured by Scanning Mobility Particle Sizer and particle mass concentration was measured according to the Guidelines VDI‐2066 upstream and downstream a novel space charge electrostatic precipitator (ESP). The ESP consists of an ioniser and a grounded brush inside of a tube form grounded collector electrode.

The ESP ensures stable operation at gas temperatures up to 350°C. The use of sharp‐points high voltage electrode ensures effective particle charging at high particle number concentrations. The combustion of wood‐pellets is characterized by lower particle mass concentrations. The highest particle mass concentrations were observed by the straw‐pellets combustion. The ESP ensures particle collection with mass collection efficiency 87±3% for wood‐logs and 82±2% for wood‐pellets combustion.

The novel ESP is recommended for exhaust gas cleaning from small scale biomass combustion facilities and domestic heating units. The use of the ESP would reduce the emissions of fine aerosol into the atmosphere and improve the air quality.

The paper presents the comparative analysis of particle size distribution and particle mass concentrations in the exhaust gas from small‐scale combustion units for different types of biomass. The study confirms the possibility to reduce particle emissions by electrostatic precipitation. The originality of the technology and apparatus is patently protected.

The purpose of this paper was to reveal the possible changes in membrane physical parameters, such as surface charge, ξ-potential and molecular interactions of membrane components due to the in vitro and in vivo influences of ESF.

The in vitro and in vivo (one hour) influences of 200 kV/m external electrostatic field (ESF) on the erythrocyte membranes of white outbred rats were investigated by spectrofluorometric, spectral and electrophoretic methods.

It was shown that the in vivo influence of ESF leads to the intermolecular reconstructions and decrease of the positive charged groups in membrane surface layer. At the same time, the increases of the negative charged groups of membrane proteins after the field influence, is revealed. The charge redistribution in membranes due to the in vitro influence of ESF is observed.

The analysis of literature data and generalization of data obtained allow us concluding that in parallel with the polarization of lipid component of bilayer the changes in the structural state of membrane proteins take place due to the ESF influence on the erythrocyte membranes. These changes can be the reason and/or the result of the ESF induced redistribution of membrane charge.

The purpose of this study is to use an electric field technique to design novel heat sinks capable of rejecting as much heat as possible in a limited space. Configuration of electrodes in this study can be used for increasing the efficiency of heat sinks.

This study investigates a novel electrohydrodynamic (EHD)-based heat sink for thermal management of electronic devices and thermal systems. The significant part of designing an EHD heat sink is the arrangement of the electrodes. A numerical simulation is performed for a heat sink with two parallel plates to determine the optimum dimensional configuration of electrodes. The upper plate of this heat sink is the ground electrode with a constant atmosphere temperature, and the lower plate of it with flush-mounted high-voltage electrodes has uniform heat flux.

The results show that heat transfer changes by the size of the vortices and the number of them. These vortices are emerged by the electric field, and the number of them increases with increasing the number of electrodes. The interaction of vortices size and number leads to having the lowest average temperature in the optimum case by two high voltage electrodes with widths of 7.5 mm and a 17.5 mm gap between them. In comparison with the case without the electric field, with increasing the applied voltage to 30 kV, the efficiency of this EHD heat sink increases up to 37%.

Improvements in electrical equipment make them more compact with higher heat fluxes. Hence, the amount of heat to be dissipated per area increases and needs thermal management to operate at their design temperatures. Therefore, to improve the performance and life span of electronic components and increase their efficiency, it is necessary to design heat sinks to decrease their maximum (peak) temperature.

The purpose of this paper is to develop a numerical simulation method based on the transient upstream finite element method (FEM) and Schottky emission theory to reveal the distribution characteristics of space charge in oil-paper insulation.

The main insulation medium of the converter transformer in high voltage direct current transmission is oil-paper insulation. However, the influence of space charge is difficult to be fully considered in the insulation design and simulation of converter transformers. To reveal the influence characteristics of the space charge, this paper proposes a numerical simulation method based on Schottky emission theory and the transient upstream FEM. This method considers the influence of factors, such as carrier mobility, carrier recombination coefficient, trap capture coefficient and diffusion coefficient on the basis of multi-physics field coupling calculation of the electric field and fluid field.

A numerical simulation method considering multiple charge states is proposed for the space charge problem in oil-paper insulation. Meanwhile, a space charge measurement platform based on the electrostatic capacitance probe method for oil-paper insulation structure is built, and the effectiveness and accuracy of the numerical simulation method is verified.

A variety of models are calculated and analyzed by the numerical simulation method in this paper, and the distribution characteristics of the space charge and total electric field in oil-paper insulation medium with single-layer, polarity reversal of plate voltage and double-layer are obtained. The research results of this paper have the guiding significance for the engineering application of oil-paper insulation and the optimal design of converter transformer insulation.