Search results

The purpose of this paper is twofold: first, to investigate the direct effect of internal and external drivers on full implementation of the green supply-chain management (GSCM) practice; and second, to investigate the direct effect of internal drivers and indirect effect of external drivers on the full implementation of the GSCM practice.

The study is based on the data collected from 30 to 35 furniture small and medium enterprises (SMEs) chosen from each surveyed region. In this case, the selected SMEs should have been conducted some GSCM practices. So, the total number of samples used in this study is 100 SMEs. The relationships between internal and external drivers and the success of the implementation of the GSCM practices are analyzed using structural equation modeling.

The results of this study have revealed that internal and external drivers, which consist of involvement, technology, financial, regulation and customer pressure, have a direct effect on early adoption of GSCM practices. Among these drivers, technology gives the most significant effect. The results have also shown that only financial factor has a direct effect on the full implementation of GCSCM practices, whereas regulation and customer pressure have positive effect on the full implementation through early adoption of GSCM practices.

Among the limitations of this study is related to the sample that was restricted to SMEs of furniture in three regions. The other limitation could be related to variable involved as internal and external drivers. This study has only used involvement, technology, knowledge, financial, and regulation and customer pressure as the antecedent variables of early adoption of the GSCM practices. Moreover, this study has only used the Likert scale as an approach to measure the implementation of GSCM practice management, which could be the source of bias in expressing the level of the implementation.

From the internal side of enterprises, the top management or the owner of SMEs can develop an effective comprehensive environmental strategy. This strategy requires the top management of SMEs show an environment oriented, allocate a specific person for implementing the GSCM practice and learn about the current technology that can support the environmentally friendly products, and also allocate the specific budget to support the implementation of GSCM practice. Moreover, since the study also found that financial factor was just the only factor having a direct effect on the full implementation of GSCM practices; therefore, the government should help the SMEs of furniture in developing low cost-GSCM implementation techniques and also provide easiness for the SMEs to get the needed fund for implementing the GSCM practice.

The research has confirmed that regulation and customer pressure have the positive and significant effect on the full implementation of GSCM practices. It may encourage the government to make some policy related to improvement of the implementation of GSCM practice by SMEs of wooden furniture, specifically in the Central Java Province. Another implication would be to encourage the customer to make purchasing oriented decision for the implementation of GSCM practices by the SMEs of wooden furniture.

This study contributes to the literature of GSCM by combining the critical factors of implementation of GSCM practices toward internal and external drivers and empirically testing the direct and indirect impacts on the level of adoption of GSCM practices.

This paper aims to discuss some of the findings of an ongoing “Green & Smart Furniture” (GSF) research project. It actually focuses on third-age consumers’ behavior and interest in purchasing smart and eco-friendly wooden furniture, providing some critical implications for the successful design and production of GSF products in the framework of innovation and differentiation.

The methodology is based on empirical data gathered from consumer research across Greece. The target group for “smart and eco furniture”, under the context of the present research, has to do with the third age, following the claims of many researchers that market orientation is essential for innovation success.

The present research promotes the development of innovation for furniture manufacturing industries, opening a new pathway in confronting the difficulties and strong competition. Firms should redesign their strategy, focusing on differentiation by including innovative products in their portfolio with high added value.

The present research is a prototype for the Greek and European furniture market, one designed to answer certain relevant questions regarding the drivers of innovation for the specific sector and the specific target group.

The purpose of this paper is to explore the viability of the ecological furniture niche markets in Greece and Cyprus. More specifically, the authors investigate the current demand on ecological furniture, business strategy and planning in introducing eco-furniture products in Greek and Cypriot market. Finally, particular emphasis lays on the analysis of the barriers regarding decision making of Greek and Cypriot enterprises in order to incorporate ecological furniture into their current activities.

Based on three distinguished hypotheses, the study seeks to draw attention to the critical factors which will impact decision making on such products development within the severe crisis. Using a prototype questionnaire, specifically structured for the aim of the research, the authors collected data from 36 Greek furniture enterprises, 25 Cypriot ones and 24 sectoral experts and relevant institutes in Greece and Cyprus. The questionnaires were selected in 2012, which were further elaborated and statistically analyzed with SPSS ver 17.0 after they were tested for their content and construct validity, managing to verify the hypotheses.

The study reveals an increasing sensitivity for environmental issues and an effort to combine it with the emergent green markets. Green strategies can lead to significant competitive advantages for Greek and Cypriot furniture firms, especially after the recovery of the long-lasting recession. Furniture manufacturers believe that environmental issues are tightly related to consumer behaviors and social image, expose a real interest for the environment and consider green strategies as a major way to differentiate. The firms of the sample focus on raw material and processes adapted to suit environmental requirements. On the other hand, these issues constitute major barriers to apply such strategies together with business risk and the lack of knowledge regarding the requirements of environmental sustainability.

The research bears certain limitations such as the sample size and the fact that results are based mainly on perceptions of entrepreneurs/managers. Thus, there are certain questions on objectivity and generalizability. Furthermore, the market aspect is examined through the lens of the entrepreneurs and experts and not the consumers themselves.

The present research explores the why and how furniture companies turn green constituting a useful basis to encourage close collaborations of companies to academia, design and research centers introducing eco-friendly practices and relevant innovations. It contributes to the field of sustainable entrepreneurship and the micro-level understanding of micro- and small companies’ reaction to this phenomenon focussing on the furniture industry. It can act as a catalyst toward the development of extensive networking among the furniture sector in both countries, which assists the diffusion of information as well as of a pertinent culture on eco-products and the development of new business models in the sector.

A major contribution is that it can constitute a useful basis for policy makers at governmental and institutional level in both Greece and Cyprus to propose solutions to critical issues such as sector survival, crisis – survival, unemployment, along with environmental care and awareness. It can further encourage close collaborations of companies to academia, design and research centers for the sustainable development of the sector through eco-friendly practices and relevant innovations.

The research is the first to question the significance of eco-conscious strategies for furniture firms at national level in Greece and Cyprus. It seems that it has indirectly contributed to eco-furniture culture development, since it has caused a fruitful brainstorming among sectoral entrepreneurs and offers solutions to the existing “cul-de-sac.”

Manufacturers and engineers need a practical and operational way to understand sustainable manufacturing and to apply it to their shop floors. The single index enables manufacturing industries to make decisions considering the continuous improvement to increase sustainability performance. The purpose of this paper is to develop a manufacturing sustainability index (MSI) based on lean and sustainability concepts using sustainable-value stream mapping.

The methodology of this research is linked to Delphi- analytical hierarchy process (AHP) qualitative assessment with sustainable-value stream mapping quantitative analysis for determining MSI. The Delphi method is used with relevant indicator selection, sustainable-value stream mapping is used to score the relevant indicator with efficiency approach and the AHP method is used to determine the indicator weight. To evaluate the applicability of this framework for assessing sustainability in the manufacturing process, a case study in Indonesian Wooden Furniture was developed.

The findings of this research is the framework for evaluating and assessing the sustainability performance of the manufacturing process. Although evaluation of the framework is limited to the furniture industry, there is a methodology potential to reproduce for the other sectors.

Theoretically, this study has provided a single index to measure performance of the manufacturing sustainability comprehensively at factory level. However, the implementation of the developed model is too limited. More application in different sectors and different industrial sizes is needed.

The value of this research lies in the novelty of the single index in measuring manufacturing sustainability and the relevant indicators for the furniture industry in Indonesia. The selection of the indicators has involved practitioners in the furniture industry and encompassed economic, environmental and social dimensions. The visualization of indicators through sustainable-value stream mapping is proven to be more practical and helpful for industrialists.

This study aims to create a system dynamics simulation model to forecast the performance of small and medium-sized enterprises (SMEs) if some decision-making is executed to reduce the negative of the coronavirus disease 2019 (COVID-19) pandemic. In particular, this study will focus on SMEs that belong to the furniture industry because the furniture industry is one of the leading industries in Indonesia.

The study develops a system dynamics-based model by using three subsystems, i.e. the “production subsystem,” “demand and revenue subsystem” and “raw material (or wood supply) subsystem.”

The best scenario is the third scenario which increases the capacity to the normal situation and government subsidy during and after the pandemic. This scenario gives the best performance for industry revenue and gross domestic product (GDP). However, for the government, the most significant expenditure occurs in the third scenario. This seems a trade-off for the government whether to save the wooden-based furniture industry by encouraging the industry to continue operating during the pandemic accompanied by high subsidies or limiting the activities of the wooden-based furniture industry to prevent the spread of COVID-19 by providing low subsidies.

First, this study does not try to combine the system dynamics (SD) methodology with the other method or use a multi-methodology since SD has several limitations and the other method may have several advantages compared to SD. Second, the models used in this study do not consider the decline in forest area and quality. Third, the demand for wooden-based furniture is obtained from historical data on domestic and foreign sales and fourth, the model does not include the government budget as a constraint to make any subsidy to help the SMEs.

This study provides essential insights into implementing the policies in the world pandemic situation when SMEs face lockdown policy.

The study revealed that relevant policy scenarios could be built after simulating and analyzing each scenario's effect on SMEs' performance during the pandemic.

This study will enrich the previous study on the impact of the pandemic on SMEs and the dynamic system modeling on SMEs. The previous study discussed the pandemic's impact on SME performance and the impact's analysis in isolation from the dynamic nature of SME owners' decisions or government policy. In this study, the impact generated from the pandemic situation could be different depending on the decision and policies taken by managers from SMEs and the government.

The purpose of this paper is to implement the combined approach of Decision Making Trial and Evaluation Laboratory (DEMATEL) and system dynamic (SD) for examining the impacts of several elements on the implementation of green supply chain management (GSCM) practices in the furniture industry concerning the amount of wood waste resulted and the demand of wood materials.

The paper develops an SD-based model by using four approaches, i.e., “demand of furniture”, “raw material”, “revenue of furniture industry” and “the implementation of green supply chain management (GSCM) practices”.

The simulation results have shown that the best conditions occur in the fourth scenario or a combined scenario. This scenario can guarantee a decrease in need of wood and discarded wood waste due to the use of wood waste for raw material by some industries. This scenario can thus increase the share of wood waste used as raw materials.

The first limitation of this study is on the calculation of the amount of wood, which has used the data of wood products obtained from the Central Java Provincial Agency of the Environment and Forestry. This calculation has not taken into account the forest area degradation. Second, the demand for furniture has been converted from the historical data of domestic and foreign sales. Third, the model used in this study has not considered the decrease of the production cost and the increase of the profit gained by the wooden furniture small- and medium-sized enterprises that use the wood waste as part of their raw material.

This research provides essential insights into the context of implementing the policies to increase the implementation of GSCM practices.

This research can make a difference in two aspects. First, it has tested policies, not in isolation. It has simultaneously tested various combinations of policies because the furniture industry can be seen as a system with complex relationships among the elements. Second, this study can broaden scientific insights related to the use of the DEMATEL method in the SD methodology.

The purpose of this paper is to identify links between the components involved in ecodesign orientations (EDOs) and the integration of ecological criteria into Scandinavian wooden furniture industries. The purpose of identifying these links is to recognize possibilities and gaps in wooden furniture product development and branding opportunities to deepen customer engagement with the Scandinavian country-of-origin (COO) brand.

The application of ecodesign in Scandinavian wooden furniture industries was studied using survey data gathered from Nordic wood furniture designers. Factor analysis was used to identify the general types of Scandinavian design styles (SDSs) and EDOs implemented in the Scandinavian wooden furniture industry. The SDS and EDO impacts on the integration of ecological design criteria were modelled using logistic regression analysis.

The integration of ecological criteria by Nordic designers influences both the perspectives on material and process optimization and the end use of wooden furniture as well as the recycling of these products. In contrast, our results showed no statistical evidence of connections between different SDS types and the integration of ecological criteria in design. Recognition of special needs of customers valuing both high Scandinavian design and EDO could provide strategic opportunities for wooden furniture industries to recognize new global market potential and enhance their competitiveness.

Developing business opportunities for wooden furniture marketed under the Scandinavian COO brand, and forming a better understanding of customer expectations on the ecological information related to different wooden furniture SDS types, is needed. This would support developing new ecodesign strategies across the whole industry and enhancing value proposition of Scandinavian wooden furniture within different customer groups.

Research findings on the intersection of industrial brand design and ecodesign are still scarce, especially with a special focus on strategic management and sustainability marketing of companies. The results of our study provide entirely new insights on the topic especially in the context of Scandinavian wooden furniture industry.

First, this study aims to examine the level of implementation of lean manufacturing (LM) practices by the small- and medium-sized enterprises (SMEs) in the wooden furniture industry in Jepara. Second is to examine the impact of LM practices on operational performance (OP) and business performance (BP). Third is to examine the impact of LM practices on BP with OP as a mediating and moderating variable. OP is the quantifiable aspect of the process of an organisation, such as production cycle time, reliability and inventory turnover, whereas BP is usually related to the responsibility of the firms to their shareholders and has the goal of profit maximization.

This study used primary data collected through an offline questionnaire. The questionnaire was intended to identify the extent of the implementation of LM practices and the level of OP and BP achieved by SMEs. The LM practices consist of 6 dimensions with 26 indicators; OP, 4 dimensions with 11 indicators; and BP, 3 dimensions with 9 indicators. The data obtained from the questionnaire were processed via partial least squares (PLS) regression using the SmartPLS software. PLS is generally used to assess the extent to which LM practices predict values in OP and BP.

A total of 100 questionnaires were administered, of which 81% were properly filled, completed and returned. The result of the study confirms that LM practices should be applied collectively and comprehensively as each practice is interdependent. Moreover, it confirms that these practices have a direct effect on OP and BP and that OP can drive broader BP measures. Finally, the result confirms that these practices can improve BP indirectly with OP as a mediator variable. While the empirical evidence in this study supported the role of OP as a mediating variable between the implementation of LM practices and OB, it did not support the role of OP as a moderating variable.

First, it is arguable that LM practices, OP and BP are only measured by the Likert scale, which would likely create bias and inconsistency from the owners or managers of SMEs in expressing the level of LM practices and performances achieved by the SMEs in the wooden furniture industry. Future research may help establish qualitative approaches to better measure the LM practices as well as the OP and BP through observation and probing. Second, this study was limited geographically (limited to only the SMEs in the wooden furniture industry in Jepara and did not cover all regions in Central Java as well as in Indonesia). Therefore, a wider geographical area could be considered, including the other regions in Indonesia which also produce wooden furniture.

This study practically contributes to the LM body of knowledge by identifying the relationships among the LM practices, OP and BP in SMEs. Understanding these relationships will help the owner or managers of SMEs make better decisions in achieving the OP and BP. The owner or managers of SMEs who implement the LM practices individually may experience disappointing performance results as these practices should be applied collectively and comprehensively.

The LM practices may help the owners or managers of the SMEs to be competitive and achieve the optimum result.

This is the first known study that adopts the PLS framework to examine how OP measurement affects the relationship between the LM practices and BP in the case of the SMEs in Indonesia.

Small traditional industry has been recognized as an important local economy that support cultural industry and is significant in many parts of the world, particularly in developing countries. The significance of this type industry as a poverty barrier, enables jobs for local rural villagers, and their role in continuing local community based cultural activities have become obvious. However, as the current modern days global pressures affecting many traditional people in developing countries, pathways of small traditional industry toward local sustainable development remain unclear. Further continuous investigations are still required on how this industry provide the platform for greater local, regional and global sustainability. Literatures and debates on the sustainability of the rural developing country concerning small traditional industries may even begin from the establishment of Brundtland sustainability commission in 1987. The conflict between brown and green agenda in Brundtland commission may also point to small-scale traditional industry growth in the developing world. Cultural traditional industries in developing countries could better lead to local sustainability pathway. On the other hand, conflict of the use of natural resources and competition may create different stories. How traditional industry in developing country survive and further innovate for development is a significant knowledge to understand. This chapter uses Jepara traditional furniture industry in Central Java – Indonesia which has been the subject of prolonged study on how small-scale industry implicated to global competition and pressures of raw material resources decline. This chapter further reviews previous research and recent study on Jepara industry upgrade and innovation, and how likely innovation may prosper for the future sustainability of this type of industry.