Search results

The authors want to design an adaptive grasping control strategy without setting the expected contact force in advance to maintain grasping stable, so that the proposed control system can deal with unknown object grasping manipulation tasks.

The adaptive grasping control strategy is proposed based on bang-bang-like control principle and slippage detection module. The bang-bang-like control method is designed to find and set the expected contact force for the whole control system, and the slippage detection function is achieved by dynamic time warping algorithm.

The expected contact force can adaptively adjust in grasping tasks to avoid bad effects on the control system by the differences of prior test results or designers. Slippage detection can be recognized in time with variation of expected contact force manipulation environment in the control system. Based on if the slippage caused by an unexpected disturbance happens, the control system can automatically adjust the expected contact force back to the level of the previous stable state after a given time, and has the ability to identify an unnecessary increasing in the expected contact force.

Only contact force is used as feedback variable in control system, and the proposed strategy can save hardware components and electronic circuit components for sensing, reducing the cost and design difficulty of conducting real control system and making it easy to realize in engineering application field. The expected contact force can adaptively adjust due to unknown disturbance and slippage for various grasping manipulation tasks.

The purpose of this paper is to achieve stable grasping and dexterous in-hand manipulation, the control of the multi-fingered robotic hand is a difficult problem as the hand has many degrees of freedom with various grasp configurations.

To achieve this goal, a novel object-level impedance control framework with optimized grasp force and grasp quality is proposed for multi-fingered robotic hand grasping and in-hand manipulation. The minimal grasp force optimization aims to achieve stable grasping satisfying friction cone constraint while keeping appropriate contact forces without damage to the object. With the optimized grasp quality function, optimal grasp quality can be obtained by dynamically sliding on the object from initial grasp configuration to final grasp configuration. By the proposed controller, the in-hand manipulation of the grasped object can be achieved with compliance to the environment force. The control performance of the closed-loop robotic system is guaranteed by appropriately choosing the design parameters as proved by a Lyapunove function.

Simulations are conducted to validate the efficiency and performance of the proposed controller with a three-fingered robotic hand.

This paper presents a method for robotic optimal grasping and in-hand manipulation with a compliant controller. It may inspire other related researchers and has great potential for practical usage in a widespread of robot applications.

This study aims to introduce a multi-configuration, three-finger dexterous hand with integrated high-dimensional sensors and provides an analysis of its design, modeling and kinematics.

A mechanical design scheme of the three-finger dexterous hand with a reconfigurable palm is proposed based on the existing research on dexterous hands. The reconfigurable palm design enables the dexterous hand to achieve four grasping modes to adapt to multiple grasping tasks. To further enhance perception, two six-axis force and torque sensors are integrated into each finger. The forward and inverse kinematics equations of the dexterous hand are derived using the D-H method for kinematics modeling, thus providing a theoretical model for index analysis. The performance is evaluated using three widely applied indicators: workspace, interactivity of fingers and manipulability.

The results of kinematics analysis show that the proposed hand has excellent dexterity. Additionally, three different experiments are conducted based on the proposed hand. The performance of the dexterous hand is also verified by fingertip force, motion accuracy test, grasping and in-hand manipulation experiments based on Feix taxonomy. The results show that the dexterous hand has good grasping ability, reproducing 82% of the natural movement of the human hand in daily grasping activities and achieving in-hand manipulations such as translation and rotation.

A novel three-finger dexterous hand with multi-configuration and integrated high-dimensional sensors is proposed. It performs better than the previously designed dexterous hand in actual experiments and kinematic performance analysis.

When designing hardware and algorithms for robotic manipulation and grasping, sensory information is typically needed to control the grasping process. This paper presents an overview of the major grasping and manipulation approaches and the more common hardware used to obtain the necessary sensory information.

This paper presents an overview of tactile sensing in intelligent robotic manipulation. The history, the common issues, and applications are reviewed. Sensor performance is briefly discussed and compared to the human tactile sense. Advantages and disadvantages of the most common sensor approaches are discussed. Some examples are given of sensors that are widely available as of today. Eventually, some examples of the state‐of‐the‐art in tactile sensing application are presented.

Although many sensor technologies and strong theoretical models have been developed, there is still much left to be done in intelligent grasping and manipulation. This is partly due to the youth of the field and the complex nature of safe control in uncertain environments. Even though there are impressive results when it comes to specific examples of advanced manipulation, there seems to be room for great improvements of hardware and especially algorithms when it comes to more generic everyday domestic tasks.

This paper presents a review of sensor hardware while also giving a glimpse of the major topics in grasping and manipulation. While better hardware of course is desirable, the major challenges seem to lie in the development and application of grasping and manipulation algorithms.

One of the development trends of robots is to enable robots to have the ability of anthropomorphic manipulation. Grasping is the first step of manipulation. For mobile manipulator robots, grasping a target during the movement process is extremely challenging, which requires the robots to make rapid motion planning for arms under uncertain dynamic disturbances. However, there are many situations require robots to grasp a target quickly while they move, such as emergency rescue. The purpose of this paper is to propose a method for target dynamic grasping during the movement of a robot.

An off-line learning from demonstrations method is applied to learn a basic reach model for arm and a motion model for fingers. An on-line dynamic adjustment method of arm speed for active and passive grasping mode is designed.

The experimental results of the robot movement on flat, slope and speed bumps ground show that the proposed method can effectively solve the problem of fast planning under uncertain disturbances caused by robot movement. The method performs well in the task of target dynamic grasping during the robot movement.

The main contribution of this paper is to propose a method to solve the problem of rapid motion planning of the robot arm under uncertain disturbances while the robot is grasping a target in the process of robot movement. The proposed method significantly improves the grasping efficiency of the robot in emergency situations. Experimental results show that the proposed method can effectively solve the problem.

This paper aims to present a procedure to change the orientation of a grasped object using dexterous manipulation. The manipulation is controlled by teleoperation in a very simple way, with the commands introduced by an operator using a keyboard.

The paper shows a teleoperation scheme, hand kinematics and a manipulation strategy to manipulate different objects using the Schunk Dexterous Hand (SDH2). A state machine is used to model the teleoperation actions and the system states. A virtual link is used to include the contact point on the hand kinematics of the SDH2.

Experiments were conducted to evaluate the proposed approach with different objects, varying the initial grasp configuration and the sequence of actions commanded by the operator.

The proposed approach uses a shared telemanipulation schema to perform dexterous manipulation; in this schema, the operator sends high-level commands and a local system uses this information, jointly with tactile measurements and the current status of the system, to generate proper setpoints for the low-level control of the fingers, which may be a commercial close one. The main contribution of this work is the mentioned local system, simple enough for practical applications and robust enough to avoid object falls.

This paper aims to study using a mobile manipulator with a collaborative robotic arm component to manipulate objects beyond the robot’s maximum payload.

This paper proposes a single-short probabilistic roadmap-based method to plan and optimize manipulation motion with environment support. The method uses an expanded object mesh model to examine contact and randomly explores object motion while keeping contact and securing affordable grasping force. It generates robotic motion trajectories after obtaining object motion using an optimization-based algorithm. With the proposed method’s help, the authors plan contact-rich manipulation without particularly analyzing an object’s contact modes and their transitions. The planner and optimizer determine them automatically.

The authors conducted experiments and analyses using simulations and real-world executions to examine the method’s performance. The method successfully found manipulation motion that met contact, force and kinematic constraints. It allowed a mobile manipulator to move heavy objects while leveraging supporting forces from environmental obstacles.

This paper presents an automatic approach for solving contact-rich heavy object manipulation problems. Unlike previous methods, the new approach does not need to explicitly analyze contact states and build contact transition graphs, thus providing a new view for robotic grasp-less manipulation, nonprehensile manipulation, manipulation with contact, etc.

The objective is to develop a flexible robot assembly system capable of economically switching between a wide range of product assemblies. Towards this goal, this paper introduces grasping as a principle issue in designing for flexibility in a robot system. The task, sensing, and certainty about actions are the primary factors in grasp decisions and not where to grasp the part. Identifying finger features, which satisfy a broad range of tasks reduces the likelihood of re‐tooling, and improves certainty about part location and relative orientation. Aided by the ability to address a broad range of tasks, design rules are established which assimilate grasps to part design.

This paper aims to present a hierarchical motion planner for planning the manipulation motion to repose long and heavy objects considering external support surfaces.

The planner includes a task-level layer and a motion-level layer. This paper formulates the manipulation planning problem at the task level by considering grasp poses as nodes and object poses for edges. This paper considers regrasping and constrained in-hand slip (drooping) during building graphs and find mixed regrasping and drooping sequences by searching the graph. The generated sequences autonomously divide the object weight between the arm and the support surface and avoid configuration obstacles. Cartesian planning is used at the robot motion level to generate motions between adjacent critical grasp poses of the sequence found by the task-level layer.

Various experiments are carried out to examine the performance of the proposed planner. The results show improved capability of robot arms to manipulate long and heavy objects using the proposed planner.

The authors’ contribution is that they initially develop a graph-based planning system that reasons both in-hand and regrasp manipulation motion considering external supports. On one hand, the planner integrates regrasping and drooping to realize in-hand manipulation with external support. On the other hand, it switches states by releasing and regrasping objects when the object is in stably placed. The search graphs' nodes could be retrieved from remote cloud servers that provide a large amount of pre-annotated data to implement cyber intelligence.