Search results

This study aims to evaluate the efficiency of using some polymers at different concentrations in the consolidation of vegetable-tanned leather artifacts.

New vegetable-tanned leather samples were prepared. The consolidants used were polyacrylamide (PAM) and polymethyl methacrylate/hydroxyethyl methacrylate (MMA-HEMA). Accelerated heat aging was applied to the untreated and treated samples. Analytical techniques used were Fourier transform infrared spectroscopy (FTIR), digital microscope, scanning electron microscope (SEM), change of color and mechanical properties.

The characteristic FTIR bands showed the effect of accelerated heat aging on the molecular structure of the studied samples, but treated and aged treated samples used were better than aged untreated samples. Microscopic investigations (digital and SEM), and mechanical properties proved that 2% was the best concentration for polymers used. The change in the total color difference of the treated and aged treated samples was limited.

This study presents the important results obtained from PAM and poly(MMA-HEMA) used for the consolidation of vegetable-tanned leather artifacts. The best results of the studied polymers can be applied directly to protect historical vegetable-tanned leathers.

Practitioners and academics are starting to recognize the benefits of green IT/IS practices. Despite these benefits, this study aims to know more regarding the factors that would drive organizations to use green IT/IS practices within their IT function and across the enterprise. To further understanding in this area, this study applies a strategic cognition framework of firm responsiveness and institutional theory to determine the extent to which an organization uses green IT/IS practices in response to stakeholder concerns. This study investigates the extent to which two organizational logics – expressive and instrumental – and three institutional pressures – coercive, mimetic and normative – jointly affect an organization's use of both green IT practices and green IS practices.

This study tested the hypotheses with survey data collected from 306 organizations. Structural equation modeling was used for data analysis.

Findings support four joint effects: (1) individualistic identity orientation and coercive pressure positively affect green IT practices; (2) collectivistic identity orientation and normative pressure positively influence green IS practices; (3) cost reduction orientation and mimetic pressure positively affect green IT practices; and (4) revenue expansion orientation and normative pressure positively influence green IS practices.

This study contributes to the literature by providing evidence for joint drivers of green IT and green IS practices. Green IT and IS practices represent organizations' different levels of commitment to environmental sustainability and responsiveness to stakeholders (i.e. green IT/IS practices). Organizations of different expressive and instrumental orientations are attuned to institutional pressures to various degrees, which leads to different green IT/IS practices.

Strategic flexibility (SF) has become increasingly important for firms because of the fast changes in the external environment. In line with the practical importance of SF, an emerging research field has developed around it that has attempted to understand the nature of SF and the key relationships. The aim of this study is to unveil the semantic structure of the recent literature on SF and to suggest new promising areas for future research.

The authors conduct a systematic literature review with a bibliographic analysis technique, which allows authors to identify the main recent streams in the literature, as well as offer reflections and suggestions for future research.

The authors uncover three main emerging areas in the research on SF, namely SF as a dynamic capability, the role of knowledge management for SF and the relationship between a firm SF and the external environment. The authors put forward three avenues for future research on SF: Avenue 1. SF, business model innovation (BMI) and other dynamic capabilities (DC), Avenue 2. Digital technologies and SF/organizational agility and Avenue 3. SF and sustainability. Articles included in the special issue entitled “A strategic perspective on flexibility, agility and adaptability in the digital era” contribute to Avenue 2, thus paving the way for filling some of the identified gaps regarding the relationship between SF and digitalization.

To the best of authors’ knowledge, this is the first literature review on SF that uses a bibliometric approach to draw conclusions on the findings in the literature. The review contributes to the theoretical understanding of SF by illustrating and explicating core topics that have persisted over time, as well as by presenting three main avenues for further developing authors’ knowledge around SF.

This paper aims to explore the process of implementing solar photovoltaic (PV) systems in construction to contribute to the understanding of systemic innovation in construction.

The exploratory research presented is based on qualitative data collected in workshops and interviews with 76 construction- and solar-industry actors experienced in solar PV projects. Actor-specific barriers were identified and analysed using an abductive approach.

In light of established definitions of systemic innovation, the process of implementing solar PV systems in construction involves challenges regarding technical and material issues, competencies, and informal and formal institutions. The specificities of this case highlight the necessity of paying attention to details in the process and to develop knowledge of systemic innovation in construction since the industry’s involvement in addressing societal challenges related to the energy transition will require implementing such innovations much more in the future.

New knowledge of solar PV systems as an innovation in professional construction is collected, enabling the adaptation of management strategies for its implementation. This knowledge can also be applied generally to other challenges encountered in highly systemic innovation implementation. Solar industry actors can gain an understanding of solar-specific challenges for the construction industry, challenges for which they must adapt their activities.

The exploration of actor-specific experiences of solar PV projects has resulted in a novel understanding of this specific innovation and its implementation. The findings illustrate a case of a high level of systemic innovation and the need to use a finer-grained scale for classification when studying innovation in construction.

The purpose of this study is to identify segments in the Gen Z population (born between 1996 and 2010) in Europe, the USA and Australia, based on brand- and lifestyle-related variables and perceptions about their online activities. This study explores how these segments differ and provide insights into cross-country similarities and differences.

An online survey was conducted with 4,304 participants, and cluster analysis and analysis of variance were used to identify and profile Gen Z segments in each of three geographical areas.

Five segments in Europe and four segments in the USA and in Australia were identified. Segments differ in terms of the importance they attach to exclusivity, inclusivity and sustainability of brands, how Gen Z members perceive money issues and stand in life and how they perceive their online activities. Similar segments are found in the three geographical areas.

This study proposes a conceptual and analytical approach for exploring intra-cohort diversity. Future research can apply this approach to different generational cohorts and use it to study intra-cohort diversity in other parts of the world.

This study provides input for marketing practitioners to create better focused and more effective campaigns.

Cross-country generational cohort research is scarce, and especially intra-cohort diversity is under-researched. This study offers a deep and fine-grained insight into the diversity of the Gen Z cohort across three geographical areas, based on representative samples in these areas.

The major objective of this research work was to evaluate various physico-chemical characteristics, such as, chemical composition, antioxidant capacity, objective color and texture profile analysis (TPA) of the wheat flour/chickpea flour (CF) blends, so that nutritious baked products could be consumed by the type-2 diabetic persons.

Wholegrain wheat flour (WGF) and white wheat flour (WWF) were substituted with CF at 0 to 40% levels. These wheat flour/CF blends were analyzed for proximate composition, the prepared dough and baked breads were tested for objective color, antioxidant capacity as trolox equivalent antioxidant capacity (TEAC), malondialdehyde (MDA) and total phenolic content (TPC) and TPA.

WGF had the highest TEAC (117.42 mM/100g) value, followed by WWF (73.98 mM/100g) and CF (60.67 mM/100g). TEAC, MDA and TPC values varied significantly among all the three flour samples.

Inclusion of whole chickpea (without dehulling) flour in such type of blends would be another interesting investigation during the future research studies.

These research findings have a great potential for the production of these baked products for human consumption on an industrial scale.

Production of breads using wheat flour and CF blends would benefits the consumers.

Production of Arabic and pan breads using wheat flour and CF blends would, therefore, combine the benefits of both the needed proteins of plant origin and the health-promoting bioactive compounds, in a most sustainable way for the consumers.

The purpose of this paper is to improve the productivity and quality of the wire arc additive manufacturing process by benchmarking the strategies from the selected six strategies, namely, heat treatment process, inter pass cooling process, inter pass cold rolling process, peening process, friction stir processing and oscillation process.

To overcome the lack of certainty associated with correlations and relationships in quality functional deployment, fuzzy numbers have been integrated with the quality functional deployment framework. Twenty performance measures have been identified from the literature under five groups, namely, mechanical properties, physical properties, geometrical properties, cost and material properties. Using house of quality weights are allocated to performance measures and groups, relationships are established between performance measures and strategies, and correlations are assigned between strategies. Finally, for each strategy, relative importance, score and crisp values are calculated.

Inter pass cold rolling process strategy is computed with the highest crisp value of 15.80 which is followed by peening process, heat treatment process, friction stir processing, inter pass cooling process,] and oscillation process strategy.

To the best of the authors’ knowledge, there has been no research in the literature that analyzes the strategies to improve the quality and productivity of the wire arc additive manufacturing process.

The public distribution system (PDS) is an Indian food security system established to manage the distribution of food grains at affordable prices. As a result of the population explosion, the long-established PDS system finds it challenging to maintain operational efficiency, quality, trust and transparency. This paper explores the possibility of leveraging blockchain technology to overcome these operational hurdles.

Through a literature review and expert interactions, the present research identifies critical success factors in terms of enablers and barriers that influence the adoption of blockchain technology in PDS. Furthermore, we propose two independent interpretive structural models (ISM) and MICMAC to characterize these attributes.

The research identifies 15 distinct enablers and ten barriers that influence the diffusion of the latest technology in the sector at focus. The analyses disclose the interrelationships/dependencies among these enablers and between barriers, along with their individual driving power and dependence power.

The research showcases the importance of automating the system and illustrates how the features of blockchain technology can assist in augmenting stakeholder satisfaction levels. However, poor or nonexistent government regulations and patronage are found to be the major impediments to adoption. The research also delineates the cost implications of this barrier through its interrelationships with other barriers.

Interesting inferences are drawn from the models that offer actionable insights for the industry, government and technologists for improving PDS performance. Such interventions will ensure national food security through enhanced trust and transparency, which can further improve efficiency and effectiveness.

This paper investigates the ways digital media applications in rural areas have transformed the influence of social networks (SN) on farmers' adoption of various climate change mitigation measures (CCMM), and explores the key mechanisms behind this transformation.

The study analyzes data from 1,002 farmers’ surveys. First, a logit model is used to measure the impact of SN on the adoption of different types of CCMM. Then, the interaction term between digital media usage (DMU) and SN is introduced to analyze the moderating effect of digital media on the impact of SN. Finally, a conditional process model is used to explore the mediating mechanism of agricultural socialization services (ASS) and the validity of information acquisition (VIA).

The results reveal that: (1) SN significantly promotes the adoption of CCMM and the marginal effect of this impact varies with different kinds of technologies. (2) DMU reinforces the effectiveness of SN in promoting farmers' adoption of CCMM. (3) The key mechanisms of the process in (2) are the ASS and the VIA.

This study shows that in the context of DMU, SN’s promotion effect on farmers' adoption of CCMM is strengthened.

The aim of the paper is to analyze how actors in foodservice companies organize for inbound open innovation (OI).

This paper conducted a case analysis of a large and successful foodservice company operating in the Dutch market. Furthermore, drawing on 18 interviews and archive data, we identified the main organizational practices involved in the implementation of inbound innovation activities and the ways they are embraced are defined.

The results provide a holistic view of the main organizational practices a foodservice company implemented at different organizational levels, to exploit external knowledge coming from third parties and to promote the sharing and recombination of knowledge resources within the organization. The identified organizational practices reveal the main interaction patterns between relevant internal actors and other external parties in the company network, as well as between actors on different hierarchical organizational levels which allows processing relevant innovation information and make relevant decisions about it.

Implications are provided in terms of both theory and practice. This paper helps foodservice companies to create an internal organizational environment that supports the exploitation of customer knowledge.

There are few studies on how companies organize themselves for OI in general, and especially in the foodservice sector.