Search results

In high voltage direct current cable systems, cable joints are known as the least reliable components due to the use of multiple dielectrics. Resulting from the electric field and temperature depending conductivity of the different dielectrics, field enhancement at critical areas, e.g. triple points, may result in accelerated aging and the failure of the component. To reduce the stress, different field grading techniques are applied. The purpose of this study is to investigate different grading techniques for cable joints. Different shapes of the electrode and a varying nonlinear conductivity of field grading materials (FGM) are used for the simulation of the electric field.

Coupled electro-thermal field simulations are applied for different joint geometries, to obtain the stationary electric field. Electric field simulations in cable joint using geometric and nonlinear field grading techniques are shown.

Using the geometric field grading, the shape of the stress cone determines the field values in critical areas (triple points). High stress reduction is obtained for a certain curvature of the stress cone. For the nonlinear stress control, materials with a higher conductivity in comparison to the cable and the joint material are used. A field reduction is obtained by increasing the total conductivity. On the other hand, this is also increasing the insulation losses within the total FGM. More applicable is the decrease of the switching field or the increase of nonlinearity, which is only locally increase the conductivity and the insulation losses. Furthermore, simulations results show that an approximately constant field reduction is obtained, if the nonlinearity is above a certain threshold.

This study is restricted to a field dependency of FGM only. For impulse voltages, high temperature and electric conductivity values my result in a thermal runaway. Furthermore, only direct current field grading techniques are studied.

The field grading of cable joints, using geometric and nonlinear techniques, is analyzed. A comparison between the electric field, by varying the curvature of the ground stress cone or the FGM conductivity constants in a complex joint geometry is novel. With its effect on the electric fields, general requirements for the geometry (geometric field grading) or the values of the FGM constants (nonlinear field grading) are defined to obtain a sufficient field grading.

The representation of Heterogeneous Object (HO) is divided into two categories: Data model (DM) and material evaluation paradigm (MEP). A hybrid methodology with geometry model and volumetric dataset to represent heterogeneous properties is proposed in this paper. Geometry model of an object can guarantee the accuracy of the final HO slices; and volumetric dataset lends the flexible manipulability and other advantages to HO representation. Two MEPs, namely distance field (DF) based and Fixed Reference Features & Active Grading Source(s) (FRF&AGS) are presented to facilitate the process of HO representation according to the designer)s input parameters. The DM can be modified interactively with users until the final satisfactory result is obtained. In this paper, a scheme of HO slicing is described. In this method, we utilize the slices contour of geometrical model as constraint to reconstruct the HO slices, which can theoretically achieve the same accuracy with the geometrical shape. Some examples of Heterogeneous object represented with our scheme are provided.

Underground cables can produce higher electromagnetic fields directly above them than an overhead line. The majority of cable failures on distribution system are caused by defects in the cable accessories. Nowadays, significant research has been carried out worldwide into examining whether electricity, and in particular, the presence of electric and magnetic fields have an adverse impact on health, especially the occurrence of cancer and childhood leukemia. The purpose of this paper is to optimize the electric field distribution in underground cable accessories. This reduces the impact of the harmful effects of the fields on living beings and humans.

Cable terminations and joints are designed to eliminate the stress concentration at the termination screen to avoid the breakdown of the cable and high values of electric field at these points. Any improvement in the cable termination and joints construction is of great interest. There are several methods for the solution of electric field distribution. These can be summarized as analytical, experimental, free-hand field mapping, analogue methods and numerical methods. In this paper cable accessories are modeled by using multilayer dielectric system and very thin deflector’s cones.

This model includes specific insulators design and smart choice of electrodes position. Stress-grading nonlinear materials in form of tapes and tubes were used with much success. In order to optimize the cable joint parameters, two criteria were monitored – total electric field magnitude and magnitude of the tangential component. More than 30 percent is reduced impact of cables on the environment.

In order to investigate the accuracy of the applied numerical model, various configurations of the cable accessories are studied. The first time is applied new Hybrid Boundary Elements Method on the protection of the environment.

Recent work has demonstrated the possibility of selectively sintering polymer powders with radio frequency (RF) radiation as a means of rapid, volumetric additive manufacturing. Although RF radiation can be used as a volumetric energy source, non-uniform heating resulting from the sample geometry and electrode configuration can lead to adverse effects in RF-treated samples. This paper aims to address these heating uniformity issues by implementing a computational design strategy for doped polymer powder beds to improve the RF heating uniformity.

Two approaches for improving the RF heating uniformity are presented with the goal of developing an RF-assisted additive manufacturing process. Both techniques use COMSOL Multiphysics® to predict the temperature rise during simulated RF exposure for different geometries. The effectiveness of each approach is evaluated by calculating the uniformity index, which provides an objective metric for comparing the heating uniformity between simulations. The first method implements an iterative heuristic tuning strategy to functionally grade the electrical conductivity within the sample. The second method involves reorienting the electrodes during the heating stage such that the electric field is applied in two directions.

Both approaches are shown to improve the heating uniformity and predicted part geometry for several test cases when applied independently. However, the greatest improvement in heating uniformity is demonstrated by combining the approaches and using multiple electrode orientations while functionally grading the samples.

This work presents an innovative approach for overcoming RF heating uniformity issues to improve the resulting part geometry in an RF-assisted, volumetric additive manufacturing method.

The paper first discusses the question of which objectives may be meaningful for the optimization of high‐voltage insulators, and exhaustively analyses the relationship between field strength and the geometrical properties of the boundary surfaces of a Boundary Value Problem (BVP). Afterwards a theoretical formulation of the optimization task is presented. In order to seek the parameters that may play a role in the optimization task, a formula for the global field derivative for shaping boundaries is derived. The parameters which can be determined by means of the numerical field calculation are discussed. These can be used as a point of reference for the development of an optimization procedure.

The purpose of this paper is to analyze the accuracy of finite element method simulations for high voltage equipment featuring resistive field grading.

In such simulations, the order of the mesh used and the polynomial order of the ansatz functions are varied while maintaining mesh and simulation parameters. The resulting accuracy of the simulations is analyzed by an error convergence study which shows the relative errors against the number of degrees of freedom the computational time and the memory consumption.

Simulation results of simplified benchmark geometry and applications to large‐scale 3D high voltage equipment are presented herein.

The impact of the order of the mesh and the Ansatz functions are studied for realistic high voltage setups. The paper helps the user of simulation software to choose adequate simulation parameters.

The purpose of this paper is to describe a novel design method to construct lattice structure computational models composed of a set of unit cells including simple cubic, body-centered cubic, face-centered cubic, diamond cubic and octet cubic unit cell.

In this paper, the authors introduce a new implicit design algorithm based on the computation of volumetric distance field (VDF). All the geometric components including lattice core structure and outer skin are represented with VDFs in a given design domain. This enables computationally efficient design of a computational model for an arbitrarily complex lattice structure. In addition, the authors propose a hybrid method based on the VDF and parametric solid models to construct a conformal lattice structure, which is oriented in accordance with the geometric form of the exterior surface. This method enables the authors to design highly complex lattice structure, computational models, in a consistent design framework irrespective of the complexity in geometric representations without sacrificing accuracy and efficiency.

Experimental results are shown for a variety of geometries to validate the proposed design method along with illustrative several lattice structure prototypes built by additive manufacturing techniques.

This method enables the authors to design highly complex lattice structure, computational models, in a consistent design framework irrespective of the complexity in geometric representations without sacrificing accuracy and efficiency.

To design and optimize the traditional aluminum gallium nitride/gallium nitride high electron mobility transistor (HEMT) device in achieving improved performance and current handling capability using the Synopsys’ Sentaurus TCAD tool.

Varying material and physical considerations, specifically investigating the effects of graded barriers, spacer interlayer, material selection for the channel, as well as study of the effects in the physical dimensions of the HEMT, have been extensively carried out.

Critical figure-of-merits, specifically the DC characteristics, 2DEG concentrations and mobility of the heterostructure device, have been evaluated. Significant observations include enhancement of maximum current density by 63 per cent, whereas the electron concentration was found to propagate by 1,020 cm⁻³ in the channel.

This work aims to provide tactical optimization to traditional heterostructure field effect transistors, rendering its application as power amplifiers, Monolithic Microwave Integrated Circuit (MMICs) and Radar, which requires low noise performance and very high radio frequency design operations.

Analysis in covering the breadth and complexity of heterostructure devices has been carefully executed through extensive TCAD modeling, and the end structure obtained has been optimized to provide best performance.

In the last years, the design and implementation of web-based education systems has grown exponentially, spurred by the fact that neither students nor teachers are bound to a specific location and that this form of computer-based education is virtually independent of any specific hardware platform. These systems accumulate a large amount of data: educational data mining and learning analytics are the two much related fields of research with the aim of using these educational data to improve the learning process. In this chapter, the authors investigate the peer assessment setting in communities of learners. Peer assessment is an effective didactic strategy, useful to evaluate groups of students in educational environments such as high schools and universities where students are required to answer open-ended questions to increase their problem-solving skills. Furthermore, such an approach could become necessary in the learning contexts where the number of students to evaluate could be very large as, for example, in massive open online courses. Here the author focus on the automated support to grading open answers via a peer evaluation-based approach, which is mediated by the (partial) grading work of the teacher, and produces a (partial as well) automated grading. The author propose to support such automated grading by means of two methods, coming from the data-mining field, such as Bayesian Networks and K-Nearest Neighbours (K-NN), presenting some experimental results, which support our choices.

The purpose of this paper is to develop a general mathematical model for the evaluation of the theoretical flexural responses of the functionally graded carbon nanotube-reinforced composite doubly curved shell panel using higher-order shear deformation theory with thermal load. It is well-known that functionally graded materials are a multidimensional problem, and the present numerical model is also capable of solving the flexural behaviour of different shell panel made up of carbon nanotube-reinforced composite with adequate accuracy in the absence of experimentation.

In this current paper, the responses of the single-walled carbon nanotube-reinforced composite panel is computed numerically using the proposed generalised higher-order mathematical model through a homemade computer code developed in MATLAB. The desired flexural responses are computed numerically using the variational method.

The validity and the convergence behaviour of the present higher-order model indicate the necessity for the analysis of multidimensional structure under the combined loading condition. The effect of various design parameters on the flexural behaviour of functionally graded carbon nanotube doubly curved shell panel are examined to highlight the applicability of the presently proposed higher-order model under thermal environment.

In this paper, for the first time, the static behaviour of functionally graded carbon nanotube-reinforced composite doubly curved shell panel is analysed using higher-order shear deformation theory. The properties of carbon nanotube and the matrix material are considered to be temperature dependent. The present model is so general that it is capable of solving various geometries from single curve to doubly curved panel, including the flat panel.