Search results

The paper aims to present a literary itinerary inspired in Julio Dinis’ novel An English Family (Uma Família Inglesa) through a comparative analysis of the places identified in the novel and the touristic attraction proposed by Visit Porto website. This novel is representative of the cultural identity and society of Porto city in the 19th century. Developing an itinerary based on this novel can facilitate the reading and understanding of the historical and cultural development of Porto.

This case study is based on the reading of the Julio Dinis’ novel An English Family (Uma Família Inglesa), whose storyline takes place in Porto city, Portugal in the 19th century. It used QGIS v. 3.12 software, a geographical information system to identify the places, to produce the maps and to create the itinerary.

The comparison between the places identified in the novel and the tourist attraction in Visit Porto website revealed that only 6 points in the novel are referenced on Visit Porto website. These points correspond to the ones in the historical city centre of Porto. However, the creation of an itinerary that brings together all the points mentioned by Julio Dinis in his novel, will allow the development of a new touristic itinerary, alternative to existing itineraries in the city and that can be seen as a distinguish offer that allows a different view of the urban space of Porto.

There are some limitations to this study that can be highlighted. First, it was difficult to find the correct location of some points identified in the novel, due to difficulty of finding historical maps with quality of the data. At the same time, as tourist information is dispersed by several sources, and most of those data is not georeferenced, it was time consuming the integration of all the information in the same geodatabase. The choice of the shortest path can also be considered as a limitation, rather than the route followed by the author in the novel, but geographic information systems operates on spatial and temporal scale, which can present a limitation in tourism analysis. In the case of this project, we have chosen the shortest path, assuming that tourist would prefer that.

This research allowed to address two areas of knowledge that are emerging in the study of urban centres as tourist areas: the use of GIS and literary tourism. Despite the fact that there are already articles on this subject, the originality focuses on the approach made around one of the greatest writers of Portugal in the 19th century, allowing to present a tourist itinerary about one of his literary works, and the comparison made between the places identified in the novel and the tourist points identified on the Visit Porto website.

Each stage in disaster management faces different challenges concerning information gathering, sharing, interpretation and dissemination. However, a comprehensive understanding of different information and communication technology (ICT) systems utilised for humanitarian disaster management is limited. Therefore, the paper follows a systems thinking approach to examine ten major man-made and/or natural disasters to comprehend the influence of ICT systems on humanitarian relief operations.

A longitudinal, multi-case study captures the use of ICT tools, stakeholders involvement, disaster stages and zones of operations for relief operations over the past two decades. A systems thinking approach is utilised to draw several inferences and develop frameworks.

Multiple ICT tools such as geographic information systems, online webpages/search engines, social media, unmanned aerial vehicles/robots and artificial intelligence are used for rapid disaster response and mitigation. Speed and coordination of relief operations have significantly increased in recent years due to the increased use of ICT systems.

Secondary data on the past ten disasters is utilised to draw inferences. The developed ICT-driven model must be validated during upcoming humanitarian relief operations.

A holistic understanding of a complex inter-relationship between influential variables (stakeholders, disaster stages, zones of operation, ICT systems) is beneficial for effectively managing humanitarian disasters.

Broadly classifying the ICT systems into surveillance, decision support and broadcasting systems, a novel ICT-enabled model for humanitarian relief operations is developed.

Currently, the Tang tomb mural cultural relic resources are presented in a multi-source and heterogeneous manner, with a lack of effective organization and sharing between resources. Therefore, this study aims to propose a multidimensional knowledge discovery solution for Tang tomb mural cultural relic resources.

Taking the Tang tomb murals collected by the Shaanxi History Museum as an example, based on clarifying the relevant concepts of Tang tomb mural resources and considering both dynamic and static dimensions, a top-down approach was adopted to first construct an ontology model of Tang tomb mural type cultural relics resources. Then, the actual case data was imported into the Neo4J graph database according to the defined pattern hierarchy to complete the static organization of knowledge, and presented in a multimodal form in knowledge reasoning and retrieval. In addition, geographic information system (GIS) technology is used to dynamically display the spatiotemporal distribution of Tang tomb mural resources, and the distribution trend is analysed from a digital humanistic perspective.

The multi-dimensional knowledge discovery of Tang tomb mural cultural relics resources can help establish the correlation and spatiotemporal relationship between resources, providing support for semantic retrieval and navigation, knowledge discovery and visualization and so on.

This study takes the murals in the collection of the Shaanxi History Museum as an example, revealing potential knowledge associations in a static and intelligent way, achieving knowledge discovery and management of Tang tomb murals, and dynamically presents the spatial distribution of Tang tomb murals through GIS technology, meeting the knowledge presentation needs of different users and opening up new ideas for the study of Tang tomb murals.

Using a real-time road network combined with historical traffic data for Al-Salt city, the paper aims to propose a new federated genetic algorithm (GA)-based optimization technique to solve the dynamic vehicle routing problem. Using a GA solver, the estimated routing time for 300 chromosomes (routes) was the shortest and most efficient over 30 generations.

In transportation systems, the objective of route planning techniques has been revised from focusing on road directors to road users. As a result, the new transportation systems use advanced technologies to support drivers and provide them with the road information they need and the services they require to reduce traffic congestion and improve routing problems. In recent decades, numerous studies have been conducted on how to find an efficient and suitable route for vehicles, known as the vehicle routing problem (VRP). To identify the best route, VRP uses real-time information-acquired geographical information systems (GIS) tools.

This study aims to develop a route planning tool using ArcGIS network analyst to enhance both cost and service quality measures, taking into account several factors to determine the best route based on the users’ preferences.

Furthermore, developing a route planning tool using ArcGIS network analyst to enhance both cost and service quality measures, taking into account several factors to determine the best route based on the users’ preferences. An adaptive genetic algorithm (GA) is used to determine the optimal time route, taking into account factors that affect vehicle arrival times and cause delays. In addition, ArcGIS' Network Analyst tool is used to determine the best route based on the user's preferences using a real-time map.

The construction industry’s daily processes demand heavy data usage and communication between project participants to meet client requirements. Thus, the application of information technology in project implementation has been increasing in the construction sector (CS) lately. However, the same cannot be seen in public sectors responsible for implementing government projects in South Africa. This study aimed to investigate the causes and effects of the underutilisation of information communication technology (ICT) in the building section of a public sector in a municipality in South Africa.

A qualitative approach was adopted for the study, using a public sector in one of the municipalities as a case study. Face-to-face interviews were conducted among the building unit workers, using unstructured interview questions. The data collected were analysed using the ATLAS.ti software.

The findings indicate a lack of understanding of existing and newly available ICT software and hardware technology among staff within the building technology due to lack of digitalisation in construction projects implementation, inadequate system upgrades, lack of adequate ICT resources, lack of financial resources for internet and software application subscriptions and lack of ICT training leading. The issues mentioned above have led to the outsourcing of projects professionals, slow pace of electronic emails, untrained professionals, usage of different and unlicensed software, resulting in the underutilisation of ICT within the whole building section. This change also adversely affects all officials, especially the junior officials who have graduated using the most recent ICT technology during their studies.

The building department of only one public sector was used for the study; therefore, the findings may not be generalisable. The case study public sector’s name is withheld for confidentiality purposes.

Adequate change management and continuous development, combined with the allocation of proper resources, would be necessary for all staff members. Enormous investments had to be made in the ICT equipment by providing a sufficient budget in the building section of the public sectors. The building section within public sectors should provide change management to all aged skills staff by attending seminars to learn new ICT technology applied within its work environment.

The study established the causes of the underutilisation of ICT in the CS, especially in the public work departments and municipalities, and how this contributes to service delivery.

To be able to continuously provide affordable services to consumers, managers of critical infrastructure (CI) maintenance supply networks have to balance investments in resilience with costs. At the same time, CI providers need to consider factors that influence resilience such as the geographical spread or the location of the network. This study aims to contextualize supply chain resilience knowledge by exploring how maintenance resource configurations impact resilience and costs in CI supply networks.

An in-depth longitudinal single case study of a representative CI provider that has centralized its maintenance supply network is used. Data were collected before and after the change to evaluate the effect of the changes on the maintenance supply network.

This study shows that in this specific CI maintenance context, structural resource choices such as the quantity or location of spare parts and tools, the creation and exploitation of tacit knowledge and staff motivation impact both resilience and costs due to geographical spread, network location and other network properties.

This study extends general supply chain resilience knowledge to a new setting (i.e. CI) and shows how existing insights apply in this context. More specifically, it is shown that even in engineered supply networks there is a need to consider the effect of human agency on resilience as the creation and exploitation of tacit knowledge are of immense importance in managing the network. In addition, the relationship between normal accidents theory and high reliability theory (HRT) is revisited as findings indicate that HRT is also important after a disruption has taken place.

The study, within the Increasing Resilience of Cultural Heritage (ResCult) project, aims to support civil protection to prevent, lessen and mitigate disasters impacts on cultural heritage using a unique standardised-3D geographical information system (GIS), including both heritage and risk and hazard information.

A top-down approach, starting from existing standards (an INSPIRE extension integrated with other parts from the standardised and shared structure), was completed with a bottom-up integration according to current requirements for disaster prevention procedures and risk analyses. The results were validated and tested in case studies (differentiated concerning the hazard and type of protected heritage) and refined during user forums.

Besides the ensuing reusable database structure, the filling with case studies data underlined the tough challenges and allowed proposing a sample of workflows and possible guidelines. The interfaces are provided to use the obtained knowledge base.

The increasing number of natural disasters could severely damage the cultural heritage, causing permanent damage to movable and immovable assets and tangible and intangible heritage. The study provides an original tool properly relating the (spatial) information regarding cultural heritage and the risk factors in a unique archive as a standard-based European tool to cope with these frequent losses, preventing risk.

Cities were regions ruled by local governments, where people were supposed to live together and provide equal access to sociocultural opportunities. In the 21st century, global warming and overuse of scarce limited resources has made sustainability more examined about for our entire environment, particularly cities. With the rapid increase in the population in the cities, humankind has faced a lot of pollution, destruction, and social inequality. Many regions and countries have started to build new smart cities using technology to overcome crowded life, traffic, and air pollution, improve food production, and use scarce natural resources sustainable. Smart cities also provide residents to improve their quality of life and their health; therefore, eco-gastronomy is related to organic farming and cooking method that minimize the damage to the environment with organic ingredients. For a healthy and quality life, meals made with healthy ingredients are required. Smart cities have also started to implement eco-gastronomy projects by using technology. In this chapter, cities which can be associated with the eco-gastronomy dimension of smart cities such as Gaziantep, Izmir, and Konya from Turkey and Copenhagen were analyzed.

The COVID-19 pandemic has posed many challenges in almost all sectors around the globe. Because of the pandemic, government entities responsible for managing health-care resources face challenges in managing and distributing their limited and valuable health resources. In addition, severe outbreaks may occur in a small or large geographical area. Therefore, county-level preparation is crucial for officials and organizations who manage such disease outbreaks. However, most COVID-19-related research projects have focused on either state- or country-level. Only a few studies have considered county-level preparations, such as identifying high-risk counties of a particular state to fight against the COVID-19 pandemic. Therefore, the purpose of this research is to prioritize counties in a state based on their COVID-19-related risks to manage the COVID outbreak effectively.

In this research, the authors use a systematic hybrid approach that uses a clustering technique to group counties that share similar COVID conditions and use a multi-criteria decision-making approach – the analytic hierarchy process – to rank clusters with respect to the severity of the pandemic. The clustering was performed using two methods, k-means and fuzzy c-means, but only one of them was used at a time during the experiment.

The results of this study indicate that the proposed approach can effectively identify and rank the most vulnerable counties in a particular state. Hence, state health resources managing entities can identify counties in desperate need of more attention before they allocate their resources and better prepare those counties before another surge.

To the best of the authors’ knowledge, this study is the first to use both an unsupervised learning approach and the analytic hierarchy process to identify and rank state counties in accordance with the severity of COVID-19.

This paper aims to propose a simulation-based performance evaluation model for the drone-based delivery of aid items to disaster-affected areas. The objective of the model is to perform analytical studies, evaluate the performance of drone delivery systems for humanitarian logistics and can support the decision-making on the operational design of the system – on where to locate drone take-off points and on assignment and scheduling of delivery tasks to drones.

This simulation model captures the dynamics and variabilities of the drone-based delivery system, including demand rates, location of demand points, time-dependent parameters and possible failures of drones’ operations. An optimization model integrated with the simulation system can update the optimality of drones’ schedules and delivery assignments.

An extensive set of experiments was performed to evaluate alternative strategies to demonstrate the effectiveness for the proposed optimization/simulation system. In the first set of experiments, the authors use the simulation-based evaluation tool for a case study for Central Florida. The goal of this set of experiments is to show how the proposed system can be used for decision-making and decision-support. The second set of experiments presents a series of numerical studies for a set of randomly generated instances.

The goal is to develop a simulation system that can allow one to evaluate performance of drone-based delivery systems, accounting for the uncertainties through simulations of real-life drone delivery flights. The proposed simulation model captures the variations in different system parameters, including interval of updating the system after receiving new information, demand parameters: the demand rate and their spatial distribution (i.e. their locations), service time parameters: travel times, setup and loading times, payload drop-off times and repair times and drone energy level: battery’s energy is impacted and requires battery change/recharging while flying.