Search results

This study aims to analyse the behaviour of plane waves within a nonlocal transversely isotropic visco-thermoelastic medium having variable thermal conductivity.

The concept of enunciation is used in the generalized theory of thermoelasticity in accordance with the Green–Lindsay and Eringen’s nonlocal elasticity models. The linear viscoelasticity model developed by Kelvin–Voigt is used to characterize the viscoelastic properties of transversely isotropic materials.

It has been noticed that three plane waves, which are coupled together, travel through the medium at three different speeds. The derivation of reflection coefficients and energy ratios for reflected waves is carried out by incorporating suitable boundary conditions. Numerical computations are performed for the amplitude ratios, phase speeds and energy partition and displayed in graphical form.

The outcomes of the numerical simulation demonstrate that the amplitude ratios are significantly influenced by variable thermal conductivity, nonlocal parameters and viscosity. It is further observed from the plots that the phase speeds in a transversely isotropic medium depend on the angle of incidence. In addition, it has been established that the energy is preserved during the reflection phenomenon.

The purpose of this paper is to establish a two-dimensional model of Green–Lindsay theory for micropolar magneto-thermoelastic medium to study the photothermal effect. The model is used to study the coupling between elastic waves and plasma waves generated due to thermal changes in a micropolar elastic medium.

Normal mode analysis is used to obtain the analytical solutions of the governing equations.

Effects of magnetic field, micropolarity, photothermal and time are highlighted on various physical fields such as stresses, temperature, displacement and carrier density. The above physical fields also conform to the boundary conditions. It is further observed that all the physical quantities become zero outside some bounded region of space, thus confirming the notion of generalized theory of thermoelasticity.

The values of physical fields are computed numerically using MATLAB software considering material constants for silicon. Furthermore, the effects are depicted graphically and analyzed accordingly. The study is valuable for the analysis of thermoelastic problems involving magnetic field, micropolarity and elastic deformations.

The purpose of this study is to analyze the thermo-diffusion process in a semi-infinite nonlocal fiber-reinforced double porous thermoelastic diffusive material with voids (FRDPTDMWV) in light of the fractional-order Lord–Shulman thermo-elasto-diffusion (LSTED) model. By virtue of Eringen’s nonlocal elasticity theory, the governing equations for the considered material are developed. The free surface of the substrate is governed by the inclined mechanical load and thermal and chemical shocks.

With the aid of the normal mode technique, the solutions of the nondimensional coupled governing equations have been obtained.

The expressions of field variables are obtained analytically. By using MATHEMATICA software, various graphical implementations are presented to describe the impacts of angle of inclination, fractional-order and nonlocality parameters. The present model is also validated on the basis of some comparative studies with some preestablished cases.

As observed from the literature survey, many different studies have been carried out by taking into account the deformation analysis in nonlocal double porous thermoelastic material structures and thermo-mechanical interaction in fiber-reinforced medium under fractional-order thermoelasticity theories. However, to the best of the authors’ knowledge, no research emphasizing the thermo-elasto-diffusive interactions in a nonlocal FRDPTDMWV has been carried out. Moreover, the effect of fractional-order LSTED theory on fiber-reinforced thermoelastic diffusive half-space with double porosity has not been illuminated till now, which significantly defines the novelty of the conducted research.

The purpose of this article is to investigate the propagation characteristics (such as particle motion, attenuation and phase velocity) of a Rayleigh wave in a nonlocal generalized thermoelastic media.

The bulk waves are represented with Helmholtz potentials. The stress-free insulated and isothermal plane surfaces are taken into account. Rayleigh wave dispersion relation has been established and is found to be complex. Due to the presence of radicals, the dispersion equation is continuously computed as a complicated irrational expression. The dispersion equation is then converted into a polynomial equation that can be solved numerically for precise complex roots. The extra zeros in this polynomial equation are eliminated to yield the dispersion equation’s roots. These routes are then filtered for inhomogeneous wave propagation that decays with depth. To perform numerical computations, MATLAB software is used.

In this medium, only one mode of Rayleigh wave exists at both isothermal and insulated boundaries. The thermal factors of nonlocal generalized thermoelastic materials significantly influence the particle motion, attenuation and phase velocity of the Rayleigh wave.

Numerical examples are taken to examine how the thermal characteristics of materials affect the existing Rayleigh wave’s propagation characteristics. Graphical analysis is used to evaluate the behavior of particle motion (such as elliptical) both inside and at the isothermal (or insulated) flat surface of the medium under consideration.

This paper aims to study the energy ratios of plane waves on an imperfect interface of elastic half-space (EHS) and orthotropic piezothermoelastic half-space (OPHS).

The dual-phase lag (DPL) theory with memory-dependent derivatives is employed to study the variation of energy ratios at the imperfect interface.

A plane longitudinal wave (P) or transversal wave (SV) propagates through EHS and strikes at the interface. As a result, two waves are reflected, and four waves are transmitted, as shown in Figure 2. The amplitude ratios are determined by imperfect boundaries having normal stiffness and transverse stiffness. The variation of energy ratios is computed numerically for a particular model of graphite (EHS)/cadmium selenide (OPHS) and depicted graphically against the angle of incidence to consider the effect of stiffness parameters, memory and kernel functions.

The energy distribution of incident P or SV waves among various reflected and transmitted waves, as well as the interaction of waves for imperfect interface (IIF), normal stiffness interface (NSIF), transverse stiffness interface (TSIF), and welded contact interface (WCIF), are important factors to consider when studying seismic wave behavior.

The present model may be used in various disciplines, such as high-energy particle physics, earthquake engineering, nuclear fusion, aeronautics, soil dynamics and other areas where memory-dependent derivative and phase delays are significant.

In a variety of technical and geophysical scenarios, wave propagation in an elastic/piezothermoelastic medium with varying magnetic fields, initial stress, temperature, porosity, etc., gives important information regarding the presence of new and modified waves.

This study aims to examine the impacts of higher memory dependencies on a novel semiconductor material that exhibits generalized photo-piezo-thermo-elastic properties. Specifically, the research focuses on analyzing the behavior of the semiconductor under three distinct temperature models.

The study assumes a homogeneous and orthotropic piezo-semiconductor medium during photo-thermal excitation. The field equations have been devised to encompass higher order parameters, temporal delays and a specifically tailored kernel function to address the problem. The eigenmode technique is used to solve these equations and derive analytical expressions.

The research presents graphical representations of the physical field distribution across different temperatures, higher order plasma heat conduction models and time. The results reveal that the amplitude of the distribution profile is markedly affected by factors such as the memory effect, time, conductive temperature and spatial coordinates. These factors cannot be overlooked in the analysis and design of the semiconductor.

Specific cases are also discussed in detail, offering the potential to advance the creation of precise models and facilitate future simulations.

The research offers valuable information on the physical field distribution across various temperatures, allowing engineers and designers to optimize the design of semiconductor devices. Understanding the impact of memory effect, time, conductive temperature and spatial coordinates enables device performance and efficiency improvement.

This manuscript is the result of the joint efforts of the authors, who independently initiated and contributed equally to this study.

This paper aims to study the energy ratios of plane waves on an interface of nonlocal thermoelastic halfspace (NTS) and nonlocal orthotropic piezothermoelastic half-space (NOPS).

The memory-dependent derivatives (MDDs) approach with a hyperbolic two-temperature (HTT), three-phase lag theory is used here to study how the energy ratios change at the interface with the angle of incidence.

Plane waves that travel through NTS and hit the interface as a longitudinal wave, a thermal wave, or a transversal wave send four waves into the NOPS medium and three waves back into the NTS medium. The amplitude ratios of the different waves that are reflected and transmitted are used to calculate the energy ratios of the waves. It is observed that these ratios are affected by the HTT, nonlocal and MDD parameters.

The energy ratios correspond to four distinct models; nonlocal HTT with memory, nonlocal HTT without memory, local HTT with memory and nonlocal classical-two-temperature with memory concerning the angle of incidence from 0 degree to 90 degree.

This model applies to several fields, including earthquake engineering, soil dynamics, high-energy particle physics, nuclear fusion, aeronautics and other fields where nonlocality, MDD and conductive temperature play an important role.

The authors produced the submitted document entirely on their initiative, with equal contributions from all of them.

This paper addresses a significant research gap in the study of Rayleigh surface wave propagation within a piezoelectric medium characterized by piezoelectric properties, thermal effects and voids. Previous research has often overlooked the crucial aspects related to voids. This study aims to provide analytical solutions for Rayleigh waves propagating through a medium consisting of a nonlocal piezo-thermo-elastic material with voids under the Moore–Gibson–Thompson thermo-elasticity theory with memory dependencies.

The analytical solutions are derived using a wave-mode method, and roots are computed from the characteristic equation using the Durand–Kerner method. These roots are then filtered based on the decay condition of surface waves. The analysis pertains to a medium subjected to stress-free and isothermal boundary conditions.

Computational simulations are performed to determine the attenuation coefficient and phase velocity of Rayleigh waves. This investigation goes beyond mere calculations and examines particle motion to gain deeper insights into Rayleigh wave propagation. Furthermore, this investigates how kernel function and nonlocal parameters influence these wave phenomena.

The results of this study reveal several unique cases that significantly contribute to the understanding of Rayleigh wave propagation within this intricate material system, particularly in the presence of voids.

This investigation provides valuable insights into the synergistic dynamics among piezoelectric constituents, void structures and Rayleigh wave propagation, enabling advancements in sensor technology, augmented energy harvesting methodologies and pioneering seismic monitoring approaches.

This study formulates a novel governing equation for a nonlocal piezo-thermo-elastic medium with voids, highlighting the significance of Rayleigh waves and investigating the impact of memory.

The purpose of this paper is to examine the impact of moisture and temperature changes on the behavior of a semi-infinite solid cylinder made of T300/5208 composite material. This study aims to provide analytical solutions for temperature, moisture and thermal stress through the de-coupling technique and the method of integral transforms. Both coupled and uncoupled cases are considered.

This study investigates the hygrothermo-elastic response of a semi-infinite solid circular cylinder using an integral transform technique that includes Hankel and Fourier transforms. The cylinder is subjected to prescribed sources, and a numerical algorithm is developed for the numerical computation of the results. The goal is to understand how the cylinder responds to changes in temperature and moisture.

The paper presents an analytical solution for temperature, moisture and thermal stress in a semi-infinite solid cylinder obtained through the use of an integral transform technique. The study focuses on a graphite fiber-reinforced epoxy matrix composite material (T300/5208) and discusses the coupled and uncoupled effects of temperature, moisture and thermal stress on the material. The results of the transient response hygrothermo-elastic field are presented graphically to provide a visual representation of the findings.

The research presented in this article is primarily hypothetical and focused on the analysis of mathematical models.

To the authors' best knowledge, this study is the first to investigate the hygrothermal effect in a semi-infinite circular cylinder. Additionally, the material properties used in the analysis are both homogenous and isotropic and independent of both temperature and moisture. These unique aspects of the study make it a novel contribution to the field.

This paper aims to focus on the accurate analysis of the fractional heat transfer in a two-dimensional (2D) rectangular monolayer tissue with three different kinds of lateral boundary conditions and the quantitative evaluation of the degree of thermal damage and burn depth.

A symplectic method is used to analytically solve the fractional heat transfer dual equation in the frequency domain (s-domain). Explicit expressions of the dual vector can be constructed by superposing the symplectic eigensolutions. The solution procedure is rigorously rational without any trial functions. And the accurate predictions of temperature and heat flux in the time domain (t-domain) are derived through numerical inverse Laplace transform.

Comparison study shows that the maximum relative error is less than 0.16%, which verifies the accuracy and effectiveness of the proposed method. The results indicate that the model and heat source parameters have a significant effect on temperature and thermal damage. The pulse duration (Δt) of the laser heat source can effectively control the time to reach the peak temperature and the peak slope of the thermal damage curve. The burn depth is closely correlated with exposure temperature and duration. And there exists the delayed effect of fractional order on burn depth.

A symplectic approach is presented for the thermal analysis of 2D fractional heat transfer. A unified time-fractional heat transfer model is proposed to describe the anomalous thermal behavior of biological tissue. New findings might provide guidance for temperature prediction and thermal damage assessment of biological tissues during hyperthermia.