Search results
1 – 10 of over 17000Andrei Bologa, Hanns‐Rudolf Paur, Helmut Seifert, Klaus Woletz and Tobias Ulbricht
The aim of the paper is to present the results of investigations of fine particle generation by small biomass combustion and the possibility of reducing the emissions by…
Abstract
Purpose
The aim of the paper is to present the results of investigations of fine particle generation by small biomass combustion and the possibility of reducing the emissions by electrostatic precipitation.
Design/methodology/approach
The grains, wood‐logs, wood‐, mixed‐ and straw‐pellets were combusted in two stoves and two boilers. The set‐ups were operated according to DIN‐4702. Particle number concentration in the gas flow was measured by Scanning Mobility Particle Sizer and particle mass concentration was measured according to the Guidelines VDI‐2066 upstream and downstream a novel space charge electrostatic precipitator (ESP). The ESP consists of an ioniser and a grounded brush inside of a tube form grounded collector electrode.
Findings
The ESP ensures stable operation at gas temperatures up to 350°C. The use of sharp‐points high voltage electrode ensures effective particle charging at high particle number concentrations. The combustion of wood‐pellets is characterized by lower particle mass concentrations. The highest particle mass concentrations were observed by the straw‐pellets combustion. The ESP ensures particle collection with mass collection efficiency 87±3% for wood‐logs and 82±2% for wood‐pellets combustion.
Practical implications
The novel ESP is recommended for exhaust gas cleaning from small scale biomass combustion facilities and domestic heating units. The use of the ESP would reduce the emissions of fine aerosol into the atmosphere and improve the air quality.
Originality/value
The paper presents the comparative analysis of particle size distribution and particle mass concentrations in the exhaust gas from small‐scale combustion units for different types of biomass. The study confirms the possibility to reduce particle emissions by electrostatic precipitation. The originality of the technology and apparatus is patently protected.
Details
Keywords
Due to oxide formation at the die backside, excessive non‐wetting and voiding can occur especially for the larger die (100K sq. mil) by gold eutectic die attach. Such voiding can…
Abstract
Due to oxide formation at the die backside, excessive non‐wetting and voiding can occur especially for the larger die (100K sq. mil) by gold eutectic die attach. Such voiding can cause die lift‐off and cracking. Ag/glass seems to be a promising candidate. However, it has some shortcomings. First, solder seal hermeticity reject may occur due to nickel diffusing through gold metallisation and being oxidised on the surface of the multilayer package. Secondly, for those devices requiring backside contact, gold metallisation on the die backside becomes the barrier for the reaction between the silicon and the glass. The adhesion may be degraded. The factors which may overcome these shortcomings will be discussed.
Wherever solvents and solvent containing systems are employed, protection for people and the environment is a vital factor in the way that they are used. The paper addresses the…
Abstract
Wherever solvents and solvent containing systems are employed, protection for people and the environment is a vital factor in the way that they are used. The paper addresses the following: Minimum contamination of the environment (air and water) by solvent emission; adherence to existing occupational safety laws: process technology and equipment that ensure high safety levels, and non polluting waste disposal.
N. Häg and P. Harrison
Describes the growth in industrial usage of GRP (glass fibre reinforced plastic) to control corrosion and, in particular, the use of DERAKANE, a vinyl ester used in GRP. Gives…
Abstract
Describes the growth in industrial usage of GRP (glass fibre reinforced plastic) to control corrosion and, in particular, the use of DERAKANE, a vinyl ester used in GRP. Gives examples of its use in Germany, the UK and the USA. Concludes that the experience with GRP based on epoxy vinyl ester resins applications is very positive and it has proved to be a very reliable alternative to more traditional materials.
Astro Technology is offering the SVS 7400 and 7500 systems for automated inspection of solder paste and component placement, to ensure quality build and high yield in…
Over the last few years a number of gas turbines have been installed in steelworks for driving the blast blower of the blast‐furnace and/or the generation of electricity for the…
Abstract
Over the last few years a number of gas turbines have been installed in steelworks for driving the blast blower of the blast‐furnace and/or the generation of electricity for the steelworks. Some of these have now been running for several thousand hours and have undergone acceptance and other tests which have disclosed widely varying amounts of corrosion and incrustation.
Miguel Afonso Sellitto, Maria Soares de Lima, Leandro Tomasin da Silva, Nelson Kadel Jr and Maria Angela Butturi
The purpose of the article is to identify relevant criteria for decision support in the implementation of waste-to-energy (WtE)-based systems.
Abstract
Purpose
The purpose of the article is to identify relevant criteria for decision support in the implementation of waste-to-energy (WtE)-based systems.
Design/methodology/approach
The methodology is a simple case study with a qualitative approach. Five experts involved in the project of a thermoelectric power plant qualitatively evaluated, on a Likert scale, a decision model with 15 indicators derived from recent studies. The research object was the first stage of a project to implement a thermoelectric plant employing municipal solid waste (MSW) in southern Brazil.
Findings
The study identified 15 criteria supporting the decision-making process regarding WtE implementation for MSW in a mid-sized city in southern Brazil. The study identified that compliance with MSW legislation, compliance with energy legislation, initial investment and public health impact are the most influential criteria. The study offered two models for decision processes: a simplified one and a complete one, with ten and fifteen indicators, respectively.
Research limitations/implications
The study concerns mid-sized municipalities in southern Brazil.
Practical implications
Municipal public managers have now a methodology based on qualitative evaluation that admits multiple perspectives, such as technical, economic, environmental and social, to support decision-making processes on WtE technologies for MSW.
Social implications
MSW management initiatives can yield jobs and revenues for vulnerable populations and provide a correct destination for MSW, mainly in developing countries.
Originality/value
The main originality is that now municipal public decision-makers have a structured model based on four constructs (technical, economic, environmental and social) deployed in 15 indicators to support decision-making processes involving WtE and MSW management.
Details
Keywords
BRIAN VICKERY and ALINA VICKERY
There is a huge amount of information and data stored in publicly available online databases that consist of large text files accessed by Boolean search techniques. It is widely…
Abstract
There is a huge amount of information and data stored in publicly available online databases that consist of large text files accessed by Boolean search techniques. It is widely held that less use is made of these databases than could or should be the case, and that one reason for this is that potential users find it difficult to identify which databases to search, to use the various command languages of the hosts and to construct the Boolean search statements required. This reasoning has stimulated a considerable amount of exploration and development work on the construction of search interfaces, to aid the inexperienced user to gain effective access to these databases. The aim of our paper is to review aspects of the design of such interfaces: to indicate the requirements that must be met if maximum aid is to be offered to the inexperienced searcher; to spell out the knowledge that must be incorporated in an interface if such aid is to be given; to describe some of the solutions that have been implemented in experimental and operational interfaces; and to discuss some of the problems encountered. The paper closes with an extensive bibliography of references relevant to online search aids, going well beyond the items explicitly mentioned in the text. An index to software appears after the bibliography at the end of the paper.