Search results
1 – 10 of 31Rafiu King Raji, Yini Wei, Guiqiang Diao and Zilun Tang
Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in…
Abstract
Purpose
Devices for step estimation are body-worn devices used to compute steps taken and/or distance covered by the user. Even though textiles or clothing are foremost to come to mind in terms of articles meant to be worn, their prominence among devices and systems meant for cadence is overshadowed by electronic products such as accelerometers, wristbands and smart phones. Athletes and sports enthusiasts using knee sleeves should be able to track their performances and monitor workout progress without the need to carry other devices with no direct sport utility, such as wristbands and wearable accelerometers. The purpose of this study thus is to contribute to the broad area of wearable devices for cadence application by developing a cheap but effective and efficient stride measurement system based on a knee sleeve.
Design/methodology/approach
A textile strain sensor is designed by weft knitting silver-plated nylon yarn together with nylon DTY and covered elastic yarn using a 1 × 1 rib structure. The area occupied by the silver-plated yarn within the structure served as the strain sensor. It worked such that, upon being subjected to stress, the electrical resistance of the sensor increases and in turn, is restored when the stress is removed. The strip with the sensor is knitted separately and subsequently sewn to the knee sleeve. The knee sleeve is then connected to a custom-made signal acquisition and processing system. A volunteer was employed for a wearer trial.
Findings
Experimental results establish that the number of strides taken by the wearer can easily be correlated to the knee flexion and extension cycles of the wearer. The number of peaks computed by the signal acquisition and processing system is therefore counted to represent stride per minute. Therefore, the sensor is able to effectively count the number of strides taken by the user per minute. The coefficient of variation of over-ground test results yielded 0.03%, and stair climbing also obtained 0.14%, an indication of very high sensor repeatability.
Research limitations/implications
The study was conducted using limited number of volunteers for the wearer trials.
Practical implications
By embedding textile piezoresistive sensors in some specific garments and or accessories, physical activity such as gait and its related data can be effectively measured.
Originality/value
To the best of our knowledge, this is the first application of piezoresistive sensing in the knee sleeve for stride estimation. Also, this study establishes that it is possible to attach (sew) already-knit textile strain sensors to apparel to effectuate smart functionality.
Details
Keywords
Rafiu King Raji, Jian Lin Han, Zixing Li and Lihua Gong
At the moment, in terms of both research and commercial products, smart shoe technology and applications seem not to attract the same magnitude of attention compared to smart…
Abstract
Purpose
At the moment, in terms of both research and commercial products, smart shoe technology and applications seem not to attract the same magnitude of attention compared to smart garments and other smart wearables such as wrist watches and wrist bands. The purpose of this study is to fill this knowledge gap by discussing issues regarding smart shoe sensing technologies, smart shoe sensor placements, factors that affect sensor placements and finally the areas of smart shoe applications.
Design/methodology/approach
Through a review of relevant literature, this study first and foremost attempts to explain what constitutes a smart shoe and subsequently discusses the current trends in smart shoe applications. Discussed in this study are relevant sensing technologies, sensor placement and areas of smart shoe applications.
Findings
This study outlined 13 important areas of smart shoe applications. It also uncovered that majority of smart shoe functionality are physical activity tracking, health rehabilitation and ambulation assistance for the blind. Also highlighted in this review are some of the bottlenecks of smart shoe development.
Originality/value
To the best of the authors’ knowledge, this is the first comprehensive review paper focused on smart shoe applications, and therefore serves as an apt reference for researchers within the field of smart footwear.
Details
Keywords
Jayme Stewart, Jessie Swanek and Adelle Forth
Despite representing a relatively small portion of the population, those who experience repeat victimization make up a significant share of all sexual and violent crimes, implying…
Abstract
Purpose
Despite representing a relatively small portion of the population, those who experience repeat victimization make up a significant share of all sexual and violent crimes, implying that perpetrators target them repeatedly. Indeed, research reveals specific traits (e.g. submissiveness) and behaviors (e.g. gait) related to past victimization or vulnerability. The purpose of this study is to explore the link between personality traits, self-assessed vulnerability and nonverbal cues.
Design/methodology/approach
In all, 40 undergraduate Canadian women were videotaped while recording a dating profile. Self-report measures of assertiveness, personality traits and vulnerability ratings for future sexual or violent victimization were obtained following the video-recording. The videotape was coded for nonverbal behaviors that have been related to assertiveness or submissiveness.
Findings
Self-perceived sexual vulnerability correlated with reduced assertiveness and dominance and increased emotionality (e.g. fear and anxiety). Additionally, nonverbal behaviors differed based on personality traits: self-touch was linked to lower assertiveness, dominance and extraversion and higher submissiveness, emotionality and warm-agreeableness.
Originality/value
To the best of the authors’ knowledge, this is the first study of its kind to consider the relationships between personality, self-perceived vulnerability and nonverbal behaviors among college-aged women. Potential implications, including enhancing autonomy and self-efficacy, are discussed.
Details
Keywords
Muhammad Abas, Tufail Habib and Sahar Noor
This study aims to investigate the fabrication of solid ankle foot orthoses (SAFOs) using fused deposition modeling (FDM) printing technology. It emphasizes cost-effective 3D…
Abstract
Purpose
This study aims to investigate the fabrication of solid ankle foot orthoses (SAFOs) using fused deposition modeling (FDM) printing technology. It emphasizes cost-effective 3D scanning with the Kinect sensor and conducts a comparative analysis of SAFO durability with varying thicknesses and materials, including polylactic acid (PLA) and carbon fiber-reinforced (PLA-C), to address research gaps from prior studies.
Design/methodology/approach
In this study, the methodology comprises key components: data capture using a cost-effective Microsoft Kinect® Xbox 360 scanner to obtain precise leg dimensions for SAFOs. SAFOs are designed using CAD tools with varying thicknesses (3, 4, and 5 mm) while maintaining consistent geometry, allowing controlled thickness impact investigation. Fabrication uses PLA and PLA-C materials via FDM 3D printing, providing insights into material suitability. Mechanical analysis uses dual finite element analysis to assess force–displacement curves and fracture behavior, which were validated through experimental testing.
Findings
The results indicate that the precision of the scanned leg dimensions, compared to actual anthropometric data, exhibits a deviation of less than 5%, confirming the accuracy of the cost-effective scanning approach. Additionally, the research identifies optimal thicknesses for SAFOs, recommending a 4 and 5 mm thickness for PLA-C-based SAFOs and an only 5 mm thickness for PLA-based SAFOs. This optimization enhances the overall performance and effectiveness of these orthotic solutions.
Originality/value
This study’s innovation lies in its holistic approach, combining low-cost 3D scanning, 3D printing and computational simulations to optimize SAFO materials and thickness. These findings advance the creation of cost-effective and efficient orthotic solutions.
Details
Keywords
Jinwei Zhao, Shuolei Feng, Xiaodong Cao and Haopei Zheng
This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and…
Abstract
Purpose
This paper aims to concentrate on recent innovations in flexible wearable sensor technology tailored for monitoring vital signals within the contexts of wearable sensors and systems developed specifically for monitoring health and fitness metrics.
Design/methodology/approach
In recent decades, wearable sensors for monitoring vital signals in sports and health have advanced greatly. Vital signals include electrocardiogram, electroencephalogram, electromyography, inertial data, body motions, cardiac rate and bodily fluids like blood and sweating, making them a good choice for sensing devices.
Findings
This report reviewed reputable journal articles on wearable sensors for vital signal monitoring, focusing on multimode and integrated multi-dimensional capabilities like structure, accuracy and nature of the devices, which may offer a more versatile and comprehensive solution.
Originality/value
The paper provides essential information on the present obstacles and challenges in this domain and provide a glimpse into the future directions of wearable sensors for the detection of these crucial signals. Importantly, it is evident that the integration of modern fabricating techniques, stretchable electronic devices, the Internet of Things and the application of artificial intelligence algorithms has significantly improved the capacity to efficiently monitor and leverage these signals for human health monitoring, including disease prediction.
Shufeng Tang, Yongsheng Kou, Guoqing Zhao, Huijie Zhang, Hong Chang, Xuewei Zhang and Yunhe Zou
The purpose of this paper is to design a climbing robot connected by a connecting rod mechanism to achieve multi-functional tasks such as obstacles crossing and climbing of power…
Abstract
Purpose
The purpose of this paper is to design a climbing robot connected by a connecting rod mechanism to achieve multi-functional tasks such as obstacles crossing and climbing of power transmission towers.
Design/methodology/approach
A connecting rod type gripper has been designed to achieve stable grasping of angle steel. Before grasping, use coordination between structures to achieve stable docking and grasping. By using the alternating movements of two claws and the middle climbing mechanism, the climbing and obstacle crossing of the angle steel were achieved.
Findings
Through a simple linkage mechanism, a climbing robot has been designed, greatly reducing the overall mass of the robot. It can also carry a load of 1 kg, and the climbing mechanism can perform stable climbing. The maximum step distance of the climbing robot is 543 mm, which can achieve the crossing of angle steel obstacles.
Originality/value
A transmission tower climbing mechanism was proposed by analyzing the working environment. Through the locking ability of the screw nut, stable clamping of the angle steel is achieved, and a pitch mechanism is designed to adjust the posture of the hand claw.
Details
Keywords
Qaisar Ali, Shazia Parveen, Tasya Aspiranti, Nunung Nurhayati and Sulistya Rusgianto
The adoption of Islamic banking (AIB) among customers has remained in the limelight due to its significance in the strategic marketing of Islamic banking (IB) services. Although…
Abstract
Purpose
The adoption of Islamic banking (AIB) among customers has remained in the limelight due to its significance in the strategic marketing of Islamic banking (IB) services. Although researchers have devoted a significant effort to investigating the drivers of AIB, little is known about the exclusive barriers hampering AIB. Accordingly, this paper aims to examine the underlying barriers to the adoption of Islamic banking (BAIB) and categorize them into different research clusters using bibliometric analysis.
Design/methodology/approach
The data was collected from 132 articles published in Scopus database between 2007 and 2022 and analyzed using VOSviewer to explore BAIB.
Findings
The findings clustered the barriers to AIB into three groups, namely, efficiency of IB products and services (service quality, Shariah compliance level, availability of services), behavioral (knowledge and awareness, religiosity, trust and intention) and personal attributes (innovativeness, understanding of mobile/internet banking and technology acceptance) factors of Islamic bank customers.
Research limitations/implications
The sample size of this study is relatively small, as the data was imported from Scopus database only to perform Bibliometric analysis. Future studies may use larger sample size by retrieving data from other databases such as Web of Science and PubMed to develop better research clusters of BAIB.
Practical implications
The dynamic business environment and unprecedented changes in consumer behavior require managers creating suitable conditions to foster adoption of their services and capture a better market share.
Originality/value
Following the findings of this research, future research avenues are identified for strategic embeddedness and global development of IB by overcoming BAIB.
Details
Keywords
Atinuke Arinola Ajani and Daramola Thompson Olapade
The concept of aging-in-place has gained notable significance in the last decade due to a dramatic demographic shift in global population dynamics that have considerably affected…
Abstract
Purpose
The concept of aging-in-place has gained notable significance in the last decade due to a dramatic demographic shift in global population dynamics that have considerably affected the ability of societies to adequately cater for their aging population. This paper examines some of the barriers to aging-in-place in the context of health needs, housing design and the role of retrofitting/smart home technologies in overcoming these barriers.
Design/methodology/approach
Using a narrative literature review approach, the authors undertook a comprehensive search of recent relevant literature focusing on five core thematic areas: health and aging, aging in place, barriers to aging in place, retrofitting and smart home technologies for successful aging in place. The authors entered appropriate keywords into interdisciplinary research databases and synthesized a coherent narrative discussing the thematic areas using the data extracted from the literature search.
Findings
There is a bidirectional relationship between aging and the home environment. Barriers to aging-in-place are mainly related to progressive decline in health, which alters the environmental needs of individuals. Appropriate building designs can significantly facilitate aging-in-place. The authors, therefore, highlight the role of retrofitting and smart home technologies as practical solutions to the challenges of the aging-in-place.
Practical implications
Forward planning in building design is essential to guarantee that the home environment is well adapted for the challenges of aging-in-place while also promoting healthy aging.
Originality/value
The paper shows the relationship between aging and the home environment and how building design considerations could enhance healthy aging-in-place.
Details
Keywords
Xiaoyu Liu, Feng Xu, Zhipeng Zhang and Kaiyu Sun
Fall accidents can cause casualties and economic losses in the construction industry. Fall portents, such as loss of balance (LOB) and sudden sways, can result in fatal, nonfatal…
Abstract
Purpose
Fall accidents can cause casualties and economic losses in the construction industry. Fall portents, such as loss of balance (LOB) and sudden sways, can result in fatal, nonfatal or attempted fall accidents. All of them are worthy of studying to take measures to prevent future accidents. Detecting fall portents can proactively and comprehensively help managers assess the risk to workers as well as in the construction environment and further prevent fall accidents.
Design/methodology/approach
This study focused on the postures of workers and aimed to directly detect fall portents using a computer vision (CV)-based noncontact approach. Firstly, a joint coordinate matrix generated from a three-dimensional pose estimation model is employed, and then the matrix is preprocessed by principal component analysis, K-means and pre-experiments. Finally, a modified fusion K-nearest neighbor-based machine learning model is built to fuse information from the x, y and z axes and output the worker's pose status into three stages.
Findings
The proposed model can output the worker's pose status into three stages (steady–unsteady–fallen) and provide corresponding confidence probabilities for each category. Experiments conducted to evaluate the approach show that the model accuracy reaches 85.02% with threshold-based postprocessing. The proposed fall-portent detection approach can extract the fall risk of workers in the both pre- and post-event phases based on noncontact approach.
Research limitations/implications
First, three-dimensional (3D) pose estimation needs sufficient information, which means it may not perform well when applied in complicated environments or when the shooting distance is extremely large. Second, solely focusing on fall-related factors may not be comprehensive enough. Future studies can incorporate the results of this research as an indicator into the risk assessment system to achieve a more comprehensive and accurate evaluation of worker and site risk.
Practical implications
The proposed machine learning model determines whether the worker is in a status of steady, unsteady or fallen using a CV-based approach. From the perspective of construction management, when detecting fall-related actions on construction sites, the noncontact approach based on CV has irreplaceable advantages of no interruption to workers and low cost. It can make use of the surveillance cameras on construction sites to recognize both preceding events and happened accidents. The detection of fall portents can help worker risk assessment and safety management.
Originality/value
Existing studies using sensor-based approaches are high-cost and invasive for construction workers, and others using CV-based approaches either oversimplify by binary classification of the non-entire fall process or indirectly achieve fall-portent detection. Instead, this study aims to detect fall portents directly by worker's posture and divide the entire fall process into three stages using a CV-based noncontact approach. It can help managers carry out more comprehensive risk assessment and develop preventive measures.
Details
Keywords
Jiwon Chung, Hyunbin Won, Hannah Lee, Soah Park, Hyewon Ahn, Suhyun Pyeon, Jeong Eun Yoon and Sumin Koo
The objective of this study was to develop wearable suit platforms with various anchoring structure designs with the intention of improving wearability and enhancing user…
Abstract
Purpose
The objective of this study was to develop wearable suit platforms with various anchoring structure designs with the intention of improving wearability and enhancing user satisfaction.
Design/methodology/approach
This study selected fabrics and materials for the suit platform through material performance tests. Two anchoring structure designs, 11-type and X-type are compared with regular clothing under control conditions. To evaluate the comfort level of the wearable suit platform, a satisfaction survey and electroencephalogram (EEG) measurements are conducted to triangulate the findings.
Findings
The 11-type exhibited higher values in comfort indicators such as α, θ, α/High-β and lower values in concentration or stress indicators such as β, ϒ, sensorimotor rhythm (SMR)+Mid-β/θ, and a spectral edge frequency of 95% compared to the X-type while walking. The 11-type offers greater comfort and satisfaction compared to the X-type when lifting based on the EEG measurements and the participants survey.
Originality/value
It is recommended to implement the 11-type when designing wearable suit platforms. These findings offer essential data on wearability, which can guide the development of soft wearable robots.
Details