Search results

Green sukuk (GS) is an emerging financial tool that has gained momentum in recent years owing to increased attention being given to Islamic finance, socially responsible investing (SRI) and sustainability agendas. Yet, GS studies are fragmented, dispersed and lack comprehensive reviews. As a response to this gap in academia, this paper aims to synthesize the knowledge on GS into thematic clusters, providing a more comprehensive understanding of the subject and offering guidelines for future research.

This study implemented a systematic literature review approach to analyse studies on GS that were published prior to and including June 2023. The PRISMA 2020 protocol was used in the sample selection process. A total of 62 peer-reviewed journal articles from six databases were identified and categorized into various themes.

The results suggest that previous research has predominantly focused on the areas of GS advantages, drivers, market development and potential sectors, along with challenges and recommendations to improve the market. However, it was found that some other aspects, including GS pricing, performance and purchasing intention, require further research attention. The analysis also indicated that the use of theories in the GS context was limited, with only five theories employed in just four out of the 62 articles examined. Moreover, this paper’s findings revealed that the studies employing quantitative and empirical analysis methods were limited to four articles. Geographically, most of the studies were conducted in Indonesia and Malaysia, while other countries with high-potential markets (e.g. GCC) had limited GS practices and studies.

The results of this study have several practical implications. For investors, a review of GS will provide greater insight into the understanding of the GS market, helping them make better investment decisions. For policymakers, this paper empowers them with the knowledge to make informed decisions regarding GS markets by highlighting key recommendations identified in the literature. Finally, the proposed guidelines can be used in future research.

While Green Bonds have received significant attention, there is a dearth of research on GS and those that exist are fragmented. A systematic literature review is necessary to identify knowledge gaps for future research.

Polyurethane concrete (PUC), as a new type of steel bridge deck paving material, the bond-slip pattern at the interface with the steel plate is not yet clear. In this study, the mechanical properties of the PUC and steel plate interface under the coupled action of temperature, normal force and tangential force were explored through shear tests and numerical simulations. An analytical model for bond-slip at the PUC/steel plate interface and a predictive model for the shear strength of the PUC/steel plate interface were developed.

The new shear test device designed in this paper overcomes the defect that the traditional oblique shear test cannot test the interface shear performance under the condition of fixed normal force. The universal testing machine (UTM) test machine was used to adjust the test temperature conditions. Combined with the results of the bond-slip test, the finite element simulation of the interface is completed by using the COHENSIVE unit to analyze the local stress distribution characteristics of the interface. The use of variance-based uncertainty analysis guaranteed the validity of the simulation.

The shear strength (τ_f) at the PUC-plate interface was negatively correlated with temperature while it was positively correlated with normal stress. The effect of temperature on the shear properties was more significant than that of normal stress. The slip corresponding to the maximum shear (D₁) positively correlates with both temperature and normal stress. The interfacial shear ductility improves with increasing temperature.

Based on the PUC bond-slip measured curves, the relationship between bond stress and slip at different stages was analyzed, and the bond-slip analytical model at different stages was established; the model was defined by key parameters such as elastic ultimate shear stress τ₀, peak stress τ_f and interface fracture energy G_f.

The goal of this paper is to examine the mediating role of organizational social capital between family firms' organizational culture, characterized by their group vs individual orientation and external vs internal orientation, and their performance.

A structural equation model is developed and tested in a sample of 176 US family firms recruited through Prolific Academic.

The authors show that group vs individual cultural orientation fosters bonding social capital, while external vs internal cultural orientation fosters bridging social capital. In turn, family firm performance is only enhanced by bridging social capital, not bonding social capital, which appears to have neutral to negative direct performance effects. Nevertheless, it is noteworthy that bonding social capital facilitates the establishment of bridging ties, leading to overall positive performance outcomes.

The understanding of how organizational culture influences family business heterogeneity and performance, along with the clarification of how bonding social capital fosters or hinders performance, provides novel insights for researchers and practitioners seeking to understand the complexities within the unique context of family businesses.

Responding to the continuing separation of participants and researchers in LIS participatory research, a new methodology is proposed: action partnership research design (APRD). It is asserted that APRD can mitigate or remove the hierarchical structures often inherent in the research process, thus allowing for equal contribution from all.

Building on the bonded design (BD) methodology and informed by a scoping literature review conducted by the same authors, APRD is a human-centered research approach with the goal of empowering and valuing community partnerships. APRD originates from research investigating the use of participatory design methods to foster collaboration between two potentially disparate groups, firstly with adult researchers/designers and elementary school children, and secondly with university faculty and IT professionals.

To achieve this goal, in addition to BD techniques, APRD draws inspiration from elements of indigenous and decolonization research methodologies, particularly those with an emphasis on destabilizing power hierarchies and involving research participants as full partners.

APRD, which emerged from findings from previous participatory design studies, especially those of BD, is based on the premise of partnership, recognizing that each member of a design team, whether researcher or participant/user, has unique expertise to contribute. By considering participants/users as full research partners, APRD aims to flatten the hierarchies exhibited in some LIS participatory research methodologies, where participants are treated more like research subjects than partners.

Drawing insights from institutional theory, this paper aims to examine whether and to what extent banks have reconfigured their management control systems (MCSs) in response to growing institutional pressures towards sustainability, understood as environmental, social and governance (ESG) issues.

The authors conducted an exploratory study at the three largest Italian banking groups to shed light on changes made in MCSs to account for ESG issues. The analysis is based on 12 semi-structured interviews with managers from the sustainability and controls areas, as well as from other relevant operational areas particularly concerned with the integration process of ESG issues. Additionally, secondary data sources were used. The Malmi and Brown (2008) MCS framework, consisting of a package of five types of formal and informal control mechanisms, was used to structure and analyse the empirical data.

The examined banks widely implemented numerous changes to their MCSs as a response to the heightened sustainability pressures from regulatory bodies and stakeholders. In particular, with the exception of action planning, the results show an extensive integration of ESG issues into the five control mechanisms of Malmi and Brown’s framework, namely, long-term planning, cybernetic, reward/compensation, administrative and cultural controls.

By identifying the approaches banks followed in reconfiguring traditional MCSs, this research sheds light on how adequate MCSs can promote banks’ “sustainable behaviours”. The results can, thus, contribute to defining best practices on how MCSs can be redesigned to support the integration of ESG issues into the banks’ way of doing business.

Overall, the findings support the theoretical assertion that institutional pressures influence the design of banks’ MCSs, and that both formal and informal controls are necessary to ensure a real engagement towards sustainability. More specifically, this study reveals that MCSs, by encompassing both formal and informal controls, are central to enabling banks to appropriately understand, plan and control the transition towards business models fully oriented to the integration of ESG issues. Thereby, this allows banks to effectively respond to the increased stakeholder demands around ESG concerns.

When the reinforced concrete beams are reinforced by bonding steel plates to the bottom, excessive use of steel plates will make the reinforced concrete beams become super-reinforced beams, and there are security risks in the actual use of super-reinforced beams. In order to avoid the occurrence of this situation, the purpose of this paper is to study the calculation method of the maximum number of bonded steel plates to reinforce reinforced concrete beams.

First of all, when establishing the limit failure state of the reinforced member, this paper comprehensively considers the role of the tensile steel bar and steel plate and takes the load effect before reinforcement as the negative contribution of the maximum number of bonded steel plates that can be used for reinforcement. Through the definition of the equivalent tensile strength, equivalent elastic modulus and equivalent yield strain of the tensile steel bar and steel plate, a method to determine the relative limit compression zone height of the reinforced member is obtained. Second, based on the maximum ratio of (reinforcement + steel plate), the relative limit compression zone height and the equivalent tensile strength of the tensile steel bar and steel plate of the reinforced member, the calculation method of the maximum number of bonded steel plates is derived. Then, the static load test of the test beam is carried out and the corresponding numerical model is established, and the reliability of the numerical model is verified by comparison. Finally, the accuracy of the calculation method of the maximum number of bonded steel plates is proved by the numerical model.

The numerical simulation results show that when the steel plate width is 800 mm and the thickness is 1–4 mm, the reinforced concrete beam has a delayed yield platform when it reaches the limit state, and the failure mode conforms to the basic stress characteristics of the balanced-reinforced beam. When the steel plate thickness is 5–8 mm, the sudden failure occurs without obvious warning when the reinforced concrete beam reaches the limit state. The failure mode conforms to the basic mechanical characteristics of the super-reinforced beam failure, and the bending moment of the beam failure depends only on the compressive strength of the concrete. The results of the calculation and analysis show that the maximum number of bonded steel plates for reinforced concrete beams in this experiment is 3,487 mm². When the width of the steel plate is 800 mm, the maximum thickness of the steel plate can be 4.36 mm. That is, when the thickness of the steel plate, the reinforced concrete beam is still the balanced-reinforced beam. When the thickness of the steel plate, the reinforced concrete beam will become a super-reinforced beam after reinforcement. The calculation results are in good agreement with the numerical simulation results, which proves the accuracy of the calculation method.

This paper presents a method for calculating the maximum number of steel plates attached to the bottom of reinforced concrete beams. First, based on the experimental research, the failure mode of reinforced concrete beams with different number of steel plates is simulated by the numerical model, and then the result of the calculation method is compared with the result of the numerical simulation to ensure the accuracy of the calculation method of the maximum number of bonded steel plates. And the study does not require a large number of experimental samples, which has a certain economy. The research result can be used to control the number of steel plates in similar reinforcement designs.

Although the effects of both news sentiment and expectations on price in financial markets have now been extensively demonstrated, the jointness that these predictors can have in their effects on price has not been well-defined. Investigating causal ordering in their effects on price can further our understanding of both direct and indirect effects in their relationship to market price.

We use autoregressive distributed lag (ARDL) methodology to examine the relationship between agent expectations and news sentiment in predicting price in a financial market. The ARDL estimation is supplemented by Grainger causality testing.

In the ARDL models we implement, measures of expectations and news sentiment and their lags were confirmed to be significantly related to market price in separate estimates. Our results further indicate that in models of relationships between these predictors, news sentiment is a significant predictor of agent expectations, but agent expectations are not significant predictors of news sentiment. Granger-causality estimates confirmed the causal inferences from ARDL results.

Taken together, the results extend our understanding of the dynamics of expectations and sentiment as exogenous information sources that relate to price in financial markets. They suggest that the extensively cited predictor of news sentiment can have both a direct effect on market price and an indirect effect on price through agent expectations.

Even traditional financial management firms now commonly track behavioral measures of expectations and market sentiment. More complete understanding of the relationship between these predictors of market price can further their representation in predictive models.

This article extends the frequently reported bivariate relationship of expectations and sentiment to market price to examine jointness in the relationship between these variables in predicting price. Inference from ARDL estimates is supported by Grainger-causality estimates.

This study aims to provide a precise understanding of how corporate sustainability information is used in socially responsible investing (SRI). The study is motivated by the lack of a recognised body of knowledge on this issue. This study, therefore, collates and reviews relevant studies (67 studies) to provide guidance to investors interested in SRI and identify a research agenda for academics desiring to contribute to this area.

This study conducts a systemic literature review employing recognised key words and searching the Web of Science. HistCite is utilised to ensure important cited studies are not missed from the collection. The review was conducted from two perspectives: (1) sources of sustainability information and (2) how the information is used in SRI.

The review identifies five major sources of sustainability information, including corporate reports, ESG ratings, industry affiliation, news and private communication with firms. These sources of information play different roles in the cross section of SRI strategies (i.e. negative and positive screening, active ownership and integration). This study provides guidance on how to use this information in SRI and provides recommendations for future research on how analysts interact with the information, how different informational characteristics impact implementation, ways to improve data quality, improvements to analysis methods and where data use needs to be extended into new strategies.

This review contributes to the SRI literature by inventorying studies of an important, yet omitted aspect, namely, sustainability information. This work also enriches the literature on corporate sustainability information by investigating how this information can be used for a specific purpose, namely, SRI. Given the increasing interest in SRI, this review will provide much-needed guidance for a range of practitioners, including investors and regulators.

This paper is one of the first studies to examine specificities, including limits of mindfulness at work in an African organisational context, whilst dealing with the ongoing COVID-19 pandemic. It specifically addresses the role of organisational and managerial support systems in restoring employee wellbeing, social connectedness and attachment to their organisations, in order to overcome the exclusion caused by the ongoing pandemic.

The study uses a qualitative research methodology that includes interviews as the main data source. The sample comprises of 20 entrepreneurs (organisational leaders) from Ghana and Nigeria.

The authors found that COVID-19-induced worries restricted the practice of mindfulness, and this was prevalent at the peak of the pandemic, particularly due to very tough economic conditions caused by reduction in salaries, and intensified by pre-existing general economic and social insecurities, and institutional voids in Africa. This aspect further resulted in lack of engagement and lack of commitment, which affected overall team performance and restricted employees’ mindfulness at work. Hence, quietness by employees even though can be linked to mindfulness was linked to larger psychological stress that they were facing. The authors also found leaders/manager’s emotional intelligence, social skills and organisational support systems to be helpful in such circumstances. However, their effectiveness varied among the cases.

This paper is one of the first studies to establish a link between the COVID-19 pandemic and mindfulness limitations. Moreover, it is a pioneering study specifically highlighting the damaging impact of COVID-19-induced concerns on leader–member exchange (LMX) and team–member exchange (TMX) relationships, particularly in the African context. It further brings in a unique discussion on the mitigating mechanisms of such COVID-19-induced concerns in organisations and highlights the roles of manager’s/leader’s emotional intelligence, social skills and supportive intervention patterns. Finally, the authors offer an in-depth assessment of the effectiveness of organisational interventions and supportive relational systems in restoring social connectedness following a social exclusion caused by COVID-19-induced worries.

Wage employees enter self-employment either directly or in a staged manner and may subsequently undertake multiple stints at self-employment. Extant research on the relationship between entry modes and the persistence and outcomes of self-employment is inconclusive. This study investigates the relationship between wage employees’ initial mode of entry into self-employment and the duration of the subsequent first two stints of self-employment.

This study used a matched longitudinal sample of 9,550 employees who became majority owners of incorporated firms from 2005 to 2016.

The findings demonstrate that the initial mode of entry into self-employment matters for the first two stints at self-employment. Staged entry into self-employment was associated with a shorter first stint and became insignificant for the second stint. Staged entry into self-employment was positively related to the odds of becoming self-employed for the second time in the same firm.

Using a comprehensive and reliable dataset, the paper shifts focus from the aggregated onward journey of novice entrepreneurs (survival as the outcome) to the duration of their self-employment stints. By doing so, the paper offers insights into the process of becoming self-employed and the patterns associated with success/failure in entrepreneurship associated with self-employment duration.