Search results

This paper aims to investigate the quality of printed surfaces and manufacturing tolerances by comparing the cylindrical cavities machined in parts obtained by fused deposition modeling (FDM) with the holes manufactured during the printing process itself. The comparison focuses on the results of roughness and tolerances, intending to obtain practical references when making assemblies.

The experimental approach focuses on the comparison of the results of roughness and tolerances of two manufacturing strategies: geometric volumes with a through-hole and the through-hole machined in volumes that were initially printed without the hole. Throughout the study, both alternates are explained to make appropriate recommendations.

The study shows the best combinations of technological parameters, both machining and three-dimensional printing, which have been decisive for obtaining successful results. These conclusive results allow enunciating recommendations for use in the industrial environment.

This paper fulfills an identified need to study the dimensional accuracy of the geometries obtained by additive manufacturing, as no experimental evidence has been found of studies that directly address the problem of the FDM-printed part with geometric and dimensional tolerances and desirable surface quality for assembly.

The paper aims to present a systematic literature review (SLR) showing the benefits, challenges and future research of blockchain technology (BT) for the supply chain (SC), also suggesting how the features of BT can change the organizational aspects of the SC.

An SLR has been conducted to detect papers that contained the word “Blockchain” in their titles, keywords or abstracts. Consequently, a second filter to analyze BT papers for the SC was applied.

This paper shows through 31 variables classified into positive, negative and future directions of technology for the SC. For instance, BT will reduce time consuming of operations management and payments using smart contracts. In addition, integrating BT with other technologies will allow product tracking and sustainable production management.

The selection of papers is limited to Scopus database and specifically to the Management Journal.

BT creates collaborative peer-to-peer and business-to-business markets. The technology automates several tasks such as order management, payment for goods, waste reduction and process control. Therefore, its use within the SCs will improve the productivity and profits of the participants.

This paper is focused on BT for the SC area with 60 articles analyzed. In addition, 13 variables on benefits, eight variables on challenges and 12 points on future research directions were analyzed. This work will help researchers and entrepreneurs to deepen about the changes that BT offers in SC.

This paper aims to report on the findings of an investigation to compare three different three-dimensional printing (3DP) or additive manufacturing technologies [i.e. fused deposition modeling (FDM), stereolithography (SLA) and material jetting (MJ)] and four different equipment (FDM, SLA, MJP 2600 and Object 260) in terms of their dimensional process capability (dimensional accuracy and surface roughness). It provides a comprehensive and comparative understanding about the level of attainable dimensional accuracy, repeatability and surface roughness of commonly used 3DP technologies. It is expected that these findings will help other researchers and industrialists in choosing the right technology and equipment for a given 3DP application.

A benchmark model of 5 × 5 cm with several common and challenging features, such as around protrusion and hole, flat surface, micro-scale ribs and micro-scale long channels was designed and printed repeatedly using four different equipment of three different 3DP technologies. The dimensional accuracy of the printed models was measured using non-contact digital measurement methods. The surface roughness was evaluated using a digital profilometer. Finally, the surface quality and edge sharpness were evaluated under a reflected light ZEISS microscope with a 50× magnification objective.

The results show that FDM technology with the used equipment results in a rough surface and loose dimensional accuracy. The SLA printer produced a smoother surface, but resulted in the distortion of thin features (<1 mm). MJ printers, on the other hand, produced comparable surface roughness and dimensional accuracy. However, ProJet MJP 3600 produced sharper edges when compared to the Objet 260 that produced round edges.

This paper, for the first time, provides a comprehensive comparison of three different commonly used 3DP technologies in terms of their dimensional capability and surface roughness without farther post-processing. Thus, it offers a reliable guideline for design consideration and printer selection based on the target application.

The purpose of this paper is to discover how Hungarian manufacturing companies interpret technology and human resources as driving forces and barriers in terms of Industry 4.0 implementation.

The authors conducted 23 semi-structured interviews with corporate leaders and applied qualitative content analysis using Atlas.ti software.

The authors formulated a new definition of Industry 4.0 which emphasises the role of human factors. The authors identified driving forces (efficiency with speed/information flow/precision) and barriers (technology compatibility, human fears and lack of digital skills) in terms of Industry 4.0 implementation and developed the DIGI-TEcH performance management dimensions.

Comparison with other countries is limited. Given the exploratory and qualitative nature, further quantitative research would be needed to generalise results. Finally, only manufacturing companies are examined.

It provides empirical evidence to practitioners to understand concerns about technology and human resource in terms of Industry 4.0 implementation. In addition, corporate performance management can be extended by the developed DIGI-TEcH dimensions.

This paper reveals key evidence for the uptake of technology and human factors in terms of Industry 4.0 implementation and their impacts on corporate operation and performance. It also provides an insight into a specific country context, which can be a useful benchmark for other Central and Eastern European countries.

The concept of hinterland is changing with a globalized economy, new needs between airports, stakeholders and the tourist destination challenge new dimensions of operation in the territory. Identifying new factors and actors in the influence zone of the hinterland will allow us to stage the importance of airports in the regional economy and the positive effects derived from these. The aim of this paper is to analyse the hinterland of Málaga Costa del Sol airport and its territorial and economic dimensions. Moreover, to provide an updated and clearer definition of hinterland, assuming future implications for airport operators, management of tourist destination by destination marketing organizations and scholars and practitioners interested in this topic. The results revealed that Málaga’s airport is modifying the hinterland of airport and its area of influence in economic and urban development terms.