Search results

Based on laser-range-finder (LRF) sensing, the control design of location and orientation stabilization for the mobile robot is investigated. However, the practical limitation of the LRF sensing is usually ignored in the control design, which leads to incorrect localization and unexpected control results. The purpose of this study is to design the fuzzy controller subject to the practical limitation on the LRF-based localization for a differentially driven wheeled mobile robot.

First, the Takagi–Sugeno (T-S) fuzzy model is derived from the polar kinematic model of a differentially driven mobile robot. Then, the fuzzy controller is designed to the derived T-S fuzzy kinematic model in accordance with the Lyapunov stabilization theorem. The derived Lyapunov stabilization conditions for the fuzzy control design are expressed as the linear matrix inequality (LMI) form and effectively solved by LMI tools. The practical limitation on the LRF-based localization is also expressed as the LMI form and simultaneously solved with the control design.

The location and posture stabilization experiments are carried out on a mobile robot with LRF-based localization to prove the effectiveness of the proposed T-S fuzzy model-based control design. Furthermore, the ground truth experiment evaluates the accuracy of LRF-based localization.

The contribution of this study is to develop the fuzzy control law for a differentially driven wheeled mobile robot under the practical limitation on LRF-based localization. The proposed control design can be applied to other robots with practical limitations on the sensors.

The purpose of this paper is to use the internal model control to deal with nonlinear stable systems affected by parametric uncertainties.

The dynamics of a considered system are approximated by a Takagi-Sugeno fuzzy model. The parameters of the fuzzy rules premises are determined manually. However, the parameters of the fuzzy rules conclusions are updated using the descent gradient method under inequality constraints in order to ensure the stability of each local model. In fact, without making these constraints the training algorithm can procure one or several unstable local models even if the desired accuracy in the training step is achieved. The considered robust control approach is the internal model. It is synthesized based on the Takagi-Sugeno fuzzy model. Two control strategies are considered. The first one is based on the parallel distribution compensation principle. It consists in associating an internal model control for each local model. However, for the second strategy, the control law is computed based on the global Takagi-Sugeno fuzzy model.

According to the simulation results, the stability of all local models is obtained and the proposed fuzzy internal model control approaches ensure robustness against parametric uncertainties.

This paper introduces a method for the identification of fuzzy model parameters ensuring the stability of all local models. Using the resulting fuzzy model, two fuzzy internal model control designs are presented.

The purpose of this paper is to deal with the stabilization of the continuous Takagi Sugeno (TS) fuzzy models using their discretized forms based on the decay rate performance approach.

This approach is structured as follows: first, a discrete model is obtained from the discretization of the continuous TS fuzzy model. The discretized model is obtained from the Euler approximation method which is used for several orders. Second, based on the decay rate stabilization conditions, the gains of a non-PDC control law ensuring the stabilization of the discrete model are determined. Third by keeping the values of the gains, the authors determine the values of the performance criterion and the authors check by simulation the stability of the continuous TS fuzzy models through the zero order hold.

The proposed idea lead to compare the performance continuous stability results with the literature. The comparison is, also, taken between the quadratic and non-quadratic cases.

Therefore, the originality of this paper consists in the improvement of the continuous fuzzy models by using their discretized models. In this case, the effect of the discretization step on the performances of the continuous TS fuzzy models is studied. The usefulness of this approach is shown through two examples.

The purpose of this paper is to look at the problem of fault tolerant control (FTC) for discrete time nonlinear system described by Interval Type-2 Takagi–Sugeno (IT2 TS) fuzzy model subjected to stochastic noise and actuator faults.

An IT2 fuzzy augmented state observer is first developed to estimate simultaneously the system states and the actuator faults since this estimation is required for the design of the FTC control law. Furthermore, based on the information of the states and the faults estimate, an IT2 fuzzy state feedback controller is conceived to compensate for the faults effect and to ensure a good tracking performance between the healthy system and the faulty one. Sufficient conditions for the existence of the IT2 fuzzy controller and the IT2 fuzzy observer are given in terms of linear matrix inequalities which can be solved using a two-step computing procedure.

The paper opted for simulation results which are applied to the three-tank system. These results are presented to illustrate the effectiveness of the proposed FTC strategy.

In this paper, the problem of active FTC design for noisy and faulty nonlinear system represented by IT2 TS fuzzy model is treated. The developed IT2 fuzzy fault tolerant controller is designed such that it can guarantee the stability of the closed-loop system. Moreover, the proposed controller allows to accommodate for faults, presents a satisfactory state tracking performance and outperforms the traditional type-1 fuzzy fault tolerant controller.

The purpose of this paper is to stabilize the type-2 Takagi–Sugeno (T–S) fuzzy systems with the sufficient and guaranteed stability conditions. The given conditions efficaciously handle parameter uncertainties by the upper and lower membership functions of the type-2 fuzzy sets (FSs).

This paper reports on a relevant study of stable fuzzy controllers and type-2 T–S fuzzy systems and reported that the synthesis of controller for nonlinear systems described by the type-2 T–S fuzzy model is a key problem and it can be resolve to convex problems via linear matrix inequalities (LMIs).

The multigain fuzzy controllers are established to improve the solvability of the stability conditions, and the authors design multigain fuzzy controllers which have extensive information of upper and lower membership grades. Consequently, the authors derive the traditional stability condition in terms of LMIs. One simulation examples illustrate the effectiveness and robustness of the derived stabilization conditions.

The uncertain MIMO nonlinear system described by Type-2 Takagi-Sugeno (T-S) fuzzy model, and successively LMI approach used to determine the system stability conditions. The proposed control approach will give superior fault-tolerant control permanence under the actuator fault [partial loss of effectiveness (LOE)]. Also the controller robust against the unmeasurable process disturbances. Additionally, the statistical z-test are carried out to validate the proposed control approach against the control approach proposed by Himanshukumar and Vipul (2019a).

In recent times, fuzzy logic is gaining more and more attention, and this is because of the capability of understanding the functioning of the system as per human knowledge-based system. The main contribution of the work is dynamically adapting the important parameters throughout the execution of the flower pollination algorithm (FPA) using concepts of fuzzy logic. By adapting the main parameters of the metaheuristics, the performance and accuracy of the metaheuristic have been improving in a varied range of applications.

The fuzzy logic-based parameter adaptation in the FPA is proposed. In addition, type-2 fuzzy logic is used to design fuzzy inference system for dynamic parameter adaptation in metaheuristics, which can help in eliminating uncertainty and hence offers an attractive improvement in dynamic parameter adaption in metaheuristic method, and, in reality, the effectiveness of the interval type-2 fuzzy inference system (IT2 FIS) has shown to provide improved results as matched to type-1 fuzzy inference system (T1 FIS) in some latest work.

One case study is considered for testing the proposed approach in a fault tolerant control problem without faults and with partial loss of effectiveness of main actuator fault with abrupt and incipient nature. For comparison between the type-1 fuzzy FPA and interval type-2 fuzzy FPA is presented using statistical analysis which validates the advantages of the interval type-2 fuzzy FPA. The statistical Z-test is presented for comparison of efficiency between two fuzzy variants of the FPA optimization method.

The main contribution of the work is a dynamical adaptation of the important parameters throughout the execution of the flower pollination optimization algorithm using concepts of type-2 fuzzy logic. By adapting the main parameters of the metaheuristics, the performance and accuracy of the metaheuristic have been improving in a varied range of applications.

The two-tank level control system is one of the real-world's second-order system (SOS) widely used as the process control in industries. It is normally operated under the Proportional integral and derivative (PID) feedback control loop. The conventional PID controller performance degrades significantly in the existence of modeling uncertainty, faults and process disturbances. To overcome these limitations, the paper suggests an interval type-2 fuzzy logic based Tilt-Integral-Derivative Controller (IT2TID) which is modified structure of PID controller.

In this paper, an optimization IT2TID controller design for the conical, noninteracting level control system is presented. Regarding to modern optimization context, the flower pollination algorithm (FPA), among the most coherent population-based metaheuristic optimization techniques is applied to search for the appropriate IT2FTID's and IT2FPID's parameters. The proposed FPA-based IT2FTID/IT2FPID design framework is considered as the constrained optimization problem. System responses obtained by the IT2FTID controller designed by the FPA will be differentiated with those acquired by the IT2FPID controller also designed by the FPA.

As the results, it was found that the IT2FTID can provide the very satisfactory tracking and regulating responses of the conical two-tank noninteracting level control system superior as compared to IT2FPID significantly under the actuator and system component faults. Additionally, statistical Z-test carried out for both the controllers and an effectiveness of the proposed IT2FTID controller is proven as compared to IT2FPID and existing passive fault tolerant controller in recent literature.

Application of new metaheuristic algorithm to optimize interval type-2 fractional order TID controller for nonlinear level control system with two type of faults. Also, proposed method will compare with other method and statistical analysis will be presented.

Fuzzy-based metaheuristic algorithm is used to optimize the fuzzy controllers for the nonlinear level control system subject to uncertainty specially in the main actuator that has lost effectiveness (LOE). To optimize the fuzzy controller, type-1 harmonic search (HS) and interval type-2 (HS) will be used.

The type-1 and type-2 fuzzy-based HS algorithms are designed for optimization of fuzzy controllers for Fault-Tolerant Control (FTC) applications, and this research proposes a fuzzy-based HS metaheuristic method. The performance of a fuzzy logic-based HS algorithm applied to a nonlinear two-tank level control process with a main actuator that has lost effectiveness (LOE) and also the same controller will be tested on DC motor angular position control with and without noise.

The key contribution of this work is the discovery of the best approach for generating an optimal vector of values for the fuzzy controller's membership function optimization. This is done in order to improve the controller's performance, bringing the process value of the two-tank level control process closer to the target process value (set point). It is worth noting that the type-1 fuzzy controller that has been optimized is an interval type-2 fuzzy system, which can handle more uncertainty than a type-1 fuzzy system.

The type-1 and type-2 fuzzy-based HS algorithms are designed for optimization of fuzzy controllers for FTC applications, and this research proposes a fuzzy-based HS metaheuristic method. The performance of a fuzzy logic-based HS algorithm applied to a nonlinear two-tank level control process with a main actuator that has LOE will be tested on DC motor angular position control with noise. Two nonlinear uncertain processes are used to demonstrate the effectiveness of the proposed control scheme.

The purpose of this paper is to improve the flexibility and tracking errors of the controllers-based neural networks (NNs) for mobile manipulator robot (MMR) in the presence of time-varying uncertainties.

The conventional backstepping force/motion control is developed by the wavelet fuzzy CMAC neural networks (WFCNNs) (for mobile-manipulator robot). The proposed WFCNNs are applied in the tracking-position-backstepping controller to deal with the uncertain dynamics of the controlled system. In addition, an adaptive robust compensator is proposed to eliminate the inevitable approximation errors, uncertain disturbances, and relax the requirement for prior knowledge of the controlled system. Besides, the position tracking controller, an adaptive robust constraint-force is also considered. The online-learning algorithms of the control parameters (WFCNNs, robust term and constraint-force controller) are obtained by using the Lyapunov stability theorem.

The design of the proposed method is determined by the Lyapunov theorem such that the stability and robustness of the control-system are guaranteed.

The WFCNNs are more the generalized networks that can overcome the constant out-weight problem of the conventional fuzzy cerebellar model articulation controller (FCMAC), or can converge faster, give smaller approximation errors and size of networks in comparison with FNNs/NNs. In addition, an intelligent-control system by inheriting the advantage of the conventional backstepping-control-system is proposed to achieve the high-position tracking for the MMR control system in the presence of uncertainties variation.

The purpose of this paper is to introduce a high load capacity coaxial couple wheeled robot (CCWR) and investigate a simple structure but effective fuzzy equilibrium controller based on (Takagi‐Sugeno) T‐S for balance control in wide‐angle range.

By selecting the robot inclination angle and angular rate as input variables and the DC motors' rotation speed as output variables, a T‐S fuzzy controller (FC) is established.

Simplified robot dynamic equilibrium equations are feasible; the robot balance in wide‐angle range could be controlled by the T‐S FC. Despite the existence of small vibrations near the equilibrium position, the system can return to equilibrium within 3 s, showing strong robustness.

The robot can achieve self‐balance and pivot around, moreover, it provides a new way for balance control of CCWR in wide‐angle range. And at the same time, the robot can achieve its work in semi‐autonomous and tele‐operated mode.

The paper shows that designing the controller based on static analysis is feasible; simple structure T‐S fuzzy control way is introduced to balance control for CCWR in a wide angle scale; the development target is to provide a kind of robot platform for testing control algorithms or a personal transporter, and the project is supported by the High Technology Research and Development Program of China.