Search results

Amid rapid technological progress, the construction industry is embracing Construction 4.0, redefining work practices through emerging technologies. However, the implications of Construction 4.0 technologies to enhancing well-being are still poorly understood. Particularly, the challenge lies in selecting technologies that critically contribute to well-being enhancement. Therefore, this study aims to evaluate the implications of Construction 4.0 technologies to enhancing well-being.

A list of Construction 4.0 technologies was identified from a national strategic plan on Construction 4.0, using Malaysia as a case study. Fourteen construction industry experts were selected to evaluate the implications of Construction 4.0 technologies on well-being using fuzzy Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The expert judgment was measured using linguistic variables that were transformed into fuzzy values. Then, the collected data was analyzed using the following analyses: fuzzy TOPSIS, Pareto, normalization, sensitivity, ranking performance and correlation.

Six Construction 4.0 technologies are critical to enhancing well-being: cloud & real-time collaboration, big data & predictive analytics, Internet of Things, building information modeling, autonomous construction and augmented reality & virtualization. In addition, artificial intelligence and advanced building materials are recommended to be implemented simultaneously as a very strong correlation exists between them.

The novelty of this study lies in a comprehensive understanding of the implications of Construction 4.0 technologies to enhancing well-being. The findings can assist researchers, industry practitioners and policymakers in making well-informed decisions to select Construction 4.0 technologies when targeting the enhancement of the overall well-being of the local construction industry.

Identifying and prioritizing supply chain risk is significant from any product’s quality and reliability perspective. Under an input-process-output workflow, conventional risk prioritization uses a risk priority number (RPN) aligned to the risk analysis. Imprecise information coupled with a lack of dealing with hesitancy margins enlarges the scope, leading to improper assessment of risks. This significantly affects monitoring quality and performance. Against the backdrop, a methodology that identifies and prioritizes the operational supply chain risk factors signifies better risk assessment.

The study proposes a multi-criteria model for risk prioritization involving multiple decision-makers (DMs). The methodology offers a robust, hybrid system based on the Intuitionistic Fuzzy (IF) Set merged with the “Technique for Order Performance by Similarity to Ideal Solution.” The nature of the model is robust. The same is shown by applying fuzzy concepts under multi-criteria decision-making (MCDM) to prioritize the identified business risks for better assessment.

The proposed IF Technique for Order Preference by Similarity to the Ideal Solution (TOPSIS) for risk prioritization model can improve the decisions within organizations that make up the chains, thus guaranteeing a “better quality in risk management.” Establishing an efficient representation of uncertain information related to traditional failure mode and effects analysis (FMEA) treatment involving multiple DMs means identifying potential risks in advance and providing better supply chain control.

In a company’s supply chain, blockchain allows data storage and transparent transmission of flows with traceability, privacy, security and transparency (Roy et al., 2022). They asserted that blockchain technology has great potential for traceability. Since risk assessment in supply chain operations can be treated as a traceability problem, further research is needed to use blockchain technologies. Lastly, issues like risk will be better assessed if predicted well; further research demands the suitability of applying predictive analysis on risk.

The study proposes a hybrid framework based on the generic risk assessment and MCDM methodologies under a fuzzy environment system. By this, the authors try to address the supply chain risk assessment and mitigation framework better than the conventional one. To the best of their knowledge, no study is found in existing literature attempting to explore the efficacy of the proposed hybrid approach over the traditional RPN system in prime sectors like steel (with production planning data). The validation experiment indicates the effectiveness of the results obtained from the proposed IF TOPSIS Approach to Risk Prioritization methodology is more practical and resembles the actual scenario compared to those obtained using the traditional RPN system (Kim et al., 2018; Kumar et al., 2018).

This study provides mathematical models to simulate the supply chain risk assessment, thus helping the manufacturer rank the risk level. In the end, the authors apply this model in a big-sized organization to validate its accuracy. The authors validate the proposed approach to an integrated steel plant impacting the production planning process. The model’s outcome substantially adds value to the current risk assessment and prioritization, significantly affecting better risk management quality.

To meet energy demand and tackle the challenges posed by global warming, Bagasse-based Cogeneration Power Generation (BCPG) plant in sugar mills have tremendous potential due to large-scale supply of renewable fuel called bagasse. To meet this goal, an integrated framework has been proposed for analyzing performance issues of BCPG.

Intuitionistic Fuzzy Lambda-Tau (IFLT) approach was implemented to compute various reliability parameters. Intuitionistic Fuzzy Failure Mode and Effect Analysis (IF-FMEA) approach has been implemented for studying risk issues results in decrease in plant's availability. Moreover, IF- Technique for Order Performance by Similarity to Ideal Solution (IF-TOPSIS) is implemented to verify accuracy of IF-FMEA approach.

For membership and non-membership functions, availability decreases to 0.0006% and 0.0020% respectively for spread ±15% to ±30%, and further decreases to 0.0127% and 0.0221% for spread ±30% to ±45%. Under risk assessment failure causes namely Storage tank (ST3), Valve (VL6), Transfer pump (TF8), Deaerator tank (DT11), High pressure heater and economiser (HP15), Boiler drum and super heater (BS22), Forced draft and Secondary air fan (FS25), Air preheater (AH29) and Furnace (FR31) with Intuitionistic Fuzzy Hybrid Weighted Euclidean Distance (IFHWED) based output scores – 0.8988, 0.9752, 0.9400, 0.8988, 0.9267, 1.1131, 1.0039, 0.8185, 1.0604 were identified as the most critical failure causes.

Reliability and risk analysis results derived from IFLT and IF-FMEA approaches respectively, to address the performance issues of BCPG is based on the quantitative and qualitative data collected from the industrial experts and maintenance log book. Moreover, to take care of hesitation in expert's knowledge, IF theory-based concept is incorporated so as to achieve more accuracy in analysis results. Reliability and risk analysis results together will be helpful in analyzing the performance characteristics and diagnosis of critical failure causes, which will minimize frequent failure in BCPG.

The framework will help plant managers to frame optimal maintenance policy in order to enhance the operational aspects of the considered unit. Moreover, the accurate and early detection of failure causes will also help managers to take prudent decision for smooth operation of plant.

The results obtained ensure continuous operation of plant by utilizing the bagasse as fuel in boiler and also mitigate the wastages of fuel. If this bagasse (green fuel) is not properly utilized, there remains a dependency on coal-based power plants to meet the power demand. The results obtained are useful for decreasing dependency on coal, and promoting bagasse as the green, and alternative fuel, the emission by burning of these fuels are not harmful for environment and thereby contribute in preventing the environment from harmful effect of GHGs gases.

IFLT approach has been implemented to develop reliability modeling equations of the BCPG unit, and furthermore to compute various reliability parameters for both membership and non-membership function. The ranking results of IF-FMEA are compared to IF-TOPSIS approach. Sensitivity analysis is done to check stability of proposed framework.

The global resolution of embracing dynamic and intertwined production systems has made it necessary to adopt viable systems like circular economy (CE) to ensure excellency in the business. However, in emerging countries, it is challenging to implement the CE practices due to the existing problems in the supply chain network, as well as due to the vulnerable financial condition of the business after the deadly hit of COVID-19. The main aim of this research is to determine the barriers to implementing CE considering the recent pandemic and suggest strategies to organizations to ensure CE for a cleaner environment and greener economy.

After an extensive literature review and validation from experts, 24 sub-barriers under the class of 6 main barriers are finalized by Pareto analysis, which is further analyzed via the best-worst method to determine the weight and rank of the barriers Further, fuzzy-Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method is used to rank the proposed startegies to overcome the analysed barriers.

The results identified “unavailability of initial funding capital”, “need long time investment”, “lack of integrating production system using advance technology” and “lack of strategic planning” as the most acute sub-barriers to CE implementation. Further, fuzzy TOPSIS method is used to suggest the best strategy to mitigate the ranked barriers. The results indicated “integrated design facility to CE”, “ensuring large scale funding for CE facility” as the best strategy.

This study will motivate managers to implement CE practices to enjoy proper utilization of the resources, sustainable benefits in business, and gain competitive advantage.

Periodically, a lot of work is done on CE practices but none of them highlighted the issues in the domain of the leather products industry (LPI) and COVID-19 toward achieving sustainability in production and consumption. Thus, some significant barriers and strategies to implement CE for achieving sustainability in LPI are highlighted in this study, which is a unique contribution to the literature.

This study aims to quantify and prioritize the main causes of lean wastes and to apply reduction methods by employing better waste cause identification methodologies.

We employed fuzzy techniques for order preference by similarity to the ideal solution (FTOPSIS), fuzzy analytical hierarchy process (FAHP), and failure mode effect analysis (FMEA) to determine the causes of defects. To determine the current defect cause identification procedures, time studies, checklists, and process flow charts were employed. The study focuses on the sewing department of a clothing industry in Addis Ababa, Ethiopia.

These techniques outperform conventional techniques and offer a better solution for challenging decision-making situations. Each lean waste’s FMEA criteria, such as severity, occurrence, and detectability, were examined. A pairwise comparison revealed that defect has a larger effect than other lean wastes. Defects were mostly caused by inadequate operator training. To minimize lean waste, prioritizing their causes is crucial.

The research focuses on a case company and the result could not be generalized for the whole industry.

The study used quantitative approaches to quantify and prioritize the causes of lean waste in the garment industry and provides insight for industrialists to focus on the waste causes to improve their quality performance.

The methodology of integrating FMEA with FAHP and FTOPSIS was the new contribution to have a better solution to decision variables by considering the severity, occurrence, and detectability of the causes of wastes. The data collection approach was based on experts’ focus group discussion to rate the main causes of defects which could provide optimal values of defect cause prioritization.

This study aims to improve the offshore wind farm (OWF) site selection evaluation index system and establishes a decision-making model for OWF site selection. It is expected to provide helpful references for the progress of offshore wind power.

Firstly, this paper establishes an evaluation criteria system for OWF site selection, considering six criteria (wind resource, environment, economic, technical, social and risk) and related subcriteria. Then, the Criteria Importance Though Intercrieria Correlation (CRITIC) method is introduced to figure out the weights of evaluation indexes. In addition, the cumulative prospect theory and technique for order preference by similarity to an ideal solution (CPT-TOPSIS) method are employed to construct the OWF site selection decision-making model. Finally, taking the OWF site selection in China as an example, the effectiveness and robustness of the framework are verified by sensitivity analysis and comparative analysis.

This study establishes the OWF site selection evaluation system and constructs a decision-making model under the spherical fuzzy environment. A case of China is employed to verify the effectiveness and feasibility of the model.

In this paper, a new decision-making model is proposed for the first time, considering the ambiguity and uncertainty of information and the risk attitudes of decision-makers (DMs) in the decision-making process.

Policymakers are developing national strategic plans to encourage organizations to adopt Construction 4.0 technologies. However, organizations often adopt the recommended technologies without aligning with organizational vision. Furthermore, there is no prioritization on which Construction 4.0 technology should be adopted, including the impact of the technologies on different criteria such as safety and health. Therefore, this study aims to evaluate Construction 4.0 technologies listed in a national strategic plan that targets the enhancement of safety and health.

A list of Construction 4.0 technologies from a national strategic plan is evaluated using the fuzzy technique for order preference by similarity to ideal solution (TOPSIS) method. Then, the data are analyzed using reliability, fuzzy TOPSIS, normalization, Pareto, sensitivity, ranking and correlation analyses.

The analyses identified six Construction 4.0 technologies that are critical in enhancing safety and health: Internet of Things, autonomous construction, big data and predictive analytics, artificial Intelligence, building information modeling and augmented reality and virtualization. In addition, six pairs of Construction 4.0 technologies illustrate strong relationships.

This study contributes to the existing body of knowledge by ranking a list of Construction 4.0 technologies in a national strategic plan that targets the enhancement of safety and health. Decision-makers can use the study findings to prioritize the technologies during the adoption process. Also, to the best of the authors’ knowledge, this study is the first to evaluate the impact of Construction 4.0 technologies listed in a national strategic plan on a specific criterion.

This study aims to provide a scientific framework for the selection of suitable substation technology in an electrical power distribution network.

The present paper focuses on adopting an integrated multi-criteria decision-making approach using the Delphi method, analytic hierarchy process (AHP) and technique for order preference by similarity to ideal solution (TOPSIS). The AHP is used to ascertain the criteria weights, and the TOPSIS is used for choosing the most fitting technology among choices of air-insulated substation, gas-insulated substation (GIS) and hybrid substation, to guarantee educated and supported choice.

The results reveal that the GIS is the most preferred technology by area experts, considering all the criteria and their relative preferences.

The current research has implications for public and private organizations responsible for the management of electricity in India, particularly the distribution system as the choice of substations is an essential component that has a strong impact on the smooth functioning and performance of the energy distribution in the country. The implementation of the chosen technology not only reduces economic losses but also contributes to the reduction of power outages, minimization of energy losses and improvement of the reliability, security, stability and quality of supply of the electrical networks.

The study explores the impact of substation technology installation in terms of its economic and environmental challenges. It emphasizes the need for proper installation checks to avoid long-term environmental hazards. Further, it reports that the economic benefits should not come at the cost of ecological degradation.

The present study is the first to provide a decision support framework for the selection of substation technologies using the hybrid AHP-TOPSIS approach. It also provides a cost–benefit analysis with short-term and long-term horizons. It further pinpoints the environmental issues with the installation of substation technology.

This study aims to investigate and classify the hospital logistics key performance indicators (KPIs) using the context of public hospitals in remote areas.

The public hospitals in northern Thailand were selected for the case study. The questionnaire was developed and used to collect data from hospital logistics experts. Then, the analytic hierarchy process (AHP) method was used to evaluate the hospital logistics KPIs in each dimension.

This research found that the procurement management dimension is ranked highest. Information and technology management is the last rank in the hospital logistics KPIs used for public hospitals in remote areas.

The public hospitals located in northern Thailand were selected for the case study. Fuzzy multi-criteria decision-making methods can be used to reduce the vagueness of the values.

The results from this study can be a guideline for hospitals to improve the efficiency of their logistics operations.

The decision-makers in the hospital can use these results to improve the hospital’s logistics performance in the future, which could help increase the service level and the safety of the patients.

The hospital logistics KPIs were revised, and the crucial KPIs were prioritized for improving the hospital logistics using the AHP method.

This study aims to propose a facilitating methodology for the application of Fuzzy FMEA (Failure Mode and Effect Analysis), comparing the traditional approach with fuzzy variations, supported by a case application in the aeronautical sector.

Based on experts' opinions in risk analysis within the aeronautical sector, rules governing the relationship between severity, occurrence, detection and risk factor were defined. This served as input for developing a fuzzyfied FMEA tool using the Matlab Fuzzy Logic Toolbox. The tool was applied to the sealing process in a company within the aeronautical sector, using triangular and trapezoidal membership functions, and the results were compared with the traditional FMEA approach.

The results of the comparative application of traditional FMEA and fuzzyfied FMEA using triangular and trapezoidal functions have yielded valuable insights into risk analysis. The findings indicated that fuzzyfied FMEA maintained coherence with the traditional analysis in identifying higher-risk effects, aligning with the prioritization of critical failure modes. Additionally, fuzzyfied FMEA allowed for a more refined prioritization by accounting for variations in each variable through fuzzy rules, thereby improving the accuracy of risk analysis and providing a more realistic representation of potential hazards. The application of the developed fuzzyfied FMEA approach showed promise in enhancing risk assessment in the aeronautical sector by considering uncertainties and offering a more detailed and context-specific analysis compared to conventional FMEA.

This study emphasizes the potential of fuzzyfied FMEA in enhancing risk assessment by accurately identifying critical failure modes and providing a more realistic representation of potential hazards. The application case reveals that the proposed tool can be integrated with expert knowledge to improve decision-making processes and risk mitigation strategies within the aeronautical industry. Due to its straightforward approach, this facilitating methodology could also prove beneficial in other industrial sectors.

This paper presents the development and application of a facilitating methodology for implementing Fuzzy FMEA, comparing it with the traditional approach and incorporating variations using triangular and trapezoidal functions. This proposed methodology uses the Toolbox Fuzzy Logic of Matlab to create a fuzzyfied FMEA tool, enabling a more nuanced and context-specific risk analysis by considering uncertainties.