Search results

The purpose of the experimental investigation was to optimize the process parameters of the fused deposition modeling (FDM) technique. The optimization of the process was performed to identify the relationship between the chosen factors and the tensile strength of acrylonitrile butadiene styrene (ABS) and carbon fiber polylactic acid (PLA) thermoplastic material, FDM printed specimens. The relationship was demonstrated by using the linear experimental model analysis, and a prediction expression was established. The developed prediction expression can be used for the prediction of tensile strength of selected thermoplastic materials at a 95% confidence level.

The Taguchi L9 experimental methodology was used to plan the total number of experiments to be performed. The process parameters were chosen as three at three working levels. The working range of chosen factors was the printing speed (60, 80 and 100mm/min), 40%, 60% and 80% as the infill density and 0.1mm, 0.2mm and 0.3mm as the layer thickness. The fused deposition modeling process parameters were optimized to get the maximum tensile strength in FDM printed ABS and carbon fiber PLA thermoplastic material specimens.

The optimum condition was achieved by the process optimization, and the desired results were obtained. The maximum desirability was achieved as 0.98 (98%) for the factors, printing speed 100mm/min, infill density 60mm and layer thickness 0.3mm. The strength of the ABS specimen was predicted to be 23.83MPa. The observed strength value was 23.66MPa. The maximum desirability was obtained as 1 (100%) for the factors, printing speed 100mm/min, infill density 60mm and layer thickness 0.2mm. The strength of the carbon fiber PLA specimen was predicted to be 26.23MPa, and the obtained value was 26.49MPa.

The research shows the useful process parameters and their suitable working conditions to print the tensile specimens of the ABS and carbon fiber PLA thermoplastics by using the fused deposition modeling technique. The process was optimized to identify the most influential factor, and the desired optimum condition was achieved at which the maximum tensile strength was reported. The produced prediction expression can be used to predict the tensile strength of ABS and carbon fiber PLA filaments.

The results obtained from the experimental investigation are useful to get an insight into the FDM process and working limits to print the parts by using the ABS and carbon fiber PLA material for various industrial and structural applications.

The results will be useful in choosing the suitable thermoplastic filament for the various prototyping and structural applications. The products that require freedom in design and are difficult to produce by most of the conventional techniques can be produced at low cost and in less time by the fused deposition modeling technique.

The process optimization shows the practical exposures to state an optimum working condition to print the ABS and carbon fiber PLA tensile specimens by using the FDM technique. The carbon fiber PLA shows better strength than ABS thermoplastic material.

Fused deposition modelling (FDM) is the most economical additive manufacturing technique. The purpose of this paper is to describe a detailed review of this technique. Total 211 research papers published during the past 26 years, that is, from the year 1994 to 2019 are critically reviewed. Based on the literature review, research gaps are identified and the scope for future work is discussed.

Literature review in the domain of FDM is categorized into five sections – (i) process parameter optimization, (ii) environmental factors affecting the quality of printed parts, (iii) post-production finishing techniques to improve quality of parts, (iv) numerical simulation of process and (iv) recent advances in FDM. Summary of major research work in FDM is presented in tabular form.

Based on literature review, research gaps are identified and scope of future work in FDM along with roadmap is discussed.

In the present paper, literature related to chemical, electric and magnetic properties of FDM parts made up of various filament feedstock materials is not reviewed.

This is a comprehensive literature review in the domain of FDM focused on identifying the direction for future work to enhance the acceptability of FDM printed parts in industries.

The purpose of this paper is to design and develop a rotary three-dimensional (3D) printer for curved layer fused deposition modeling (CLFDM), and discuss some technical challenges in the development.

Some technical challenges include, but are not limited to, the machine design and control system, motion analysis and simulation, workspace and printing process analysis, curved layer slicing and tool path planning. Moreover, preliminary experiments are carried out to prove the feasibility of the design.

A rotary 3D printer for CLFDM has been designed and developed. Moreover, this printer can function as a polar 3D printer for flat layer additive manufacturing (AM). Compared with flat layer AM, CLFDM weakens the staircase effect and improves geometrical accuracy and mechanical properties. Hence, CLFDM is more suitable for parts with curved surfaces.

Double extruders have brought improved build speed. However, this paper is restricted to complex process planning and mechanical structures, which may lead to collisions during printing. Meanwhile, the rotation range of the nozzle is limited by mechanical structures, affecting the manufacturing capability of complex curved surfaces.

A novel rotary 3D printer, which has four degrees of freedom and double extruders, has been designed and manufactured. The investigation on the prototype has proved its capability of CLFDM. Besides, this rotary 3D printer has two working modes, which brings the possibility of flat layer AM and CLFDM.

The purpose of this paper is to review research studies on process optimisation and machine development that lead to the enhancement of final products in various aspects of the fused deposition modelling (FDM) process.

An overview of the literature, focussing on process parameters, machine developments and material characterisations. This study investigates recent research studies that studied FDM capabilities in printing a vast range of materials from thermoplastics to metal alloys.

FDM is one of the most common techniques in additive manufacturing (AM) processes. Many parameters in this technology have effects on three-dimensional printed products. Therefore, it is necessary to obtain the optimum elements, for example, build orientation, layer thickness, nozzle diameter, infill pattern and bed temperature. By selecting a proper variable range of parameters, the layers adhere strongly and building end-use products of high quality are achievable. A vast range of materials and their properties from polymers to composite-based polymers are presented. Novel techniques to print metal alloys and composites are examined to increase the productivity of the FDM process. Additionally, defects such as shrinkage and warpage are discussed to eliminate the system’s limitations and improve the quality of final products. Multi-axis and mobile machines brought enhancements throughout the process to eliminate obstacles such as staircase defects in the conventional FDM process. In brief, recent developments were identified and a summary of major improvements was discussed in this study for future research.

This paper is an overview that provides information about research and developments in FDM. This review focusses on process optimisation and obstacles in printing polymers, composites, geopolymers and novel materials. Therefore, machine characteristics were examined to find out the accessibility of printing novel materials for different applications.

Layered manufacturing is an evolution of rapid prototyping (RP) techniques where the part is built in layers. While most of the previous applications focused on building “prototypes”, recent developments in this field enabled some of the prototyping methods to achieve an agile fabrication technology to produce the final product directly. A shift from prototyping to manufacturing of the final product necessitates broadening of the material choice, improvement of the surface quality, dimensional stability, and achieving the necessary mechanical properties to meet the performance criteria. The current study is part of an ongoing project to adapt fused deposition modeling to fabrication of ceramic and multi‐functional components. This paper presents a methodology of the mechanical characterization of products fabricated using fused deposition modeling.

This paper aims to present a geometrical void model in conjunction with a multiscale method to evaluate the effect of interraster distance, bead (raster) width and layer height, on the voids concentration (volume) and subsequently calculate the final mechanical properties of the fused deposition modeling parts at constant infill.

A geometric model of the voids inside the representative volume element (RVE) is combined with a two-scale asymptotic homogenization method. The RVEs are subjected to periodic boundary conditions solved by finite element (FE) to calculate the effective mechanical properties of the corresponding RVEs. The results are validated with literature and experiments.

Bead width from 0.2 to 0.3 mm, reported a decrease of 25% and 24% void volume for a constant layer height (0.1 and 0.2 mm – 75% infill). It is reported that the void’s volume increased up to 14%, 32% and 36% for 75%, 50% and 25% infill by varying layer height (0.1–0.2  and 0.3 mm), respectively. For elastic modulus, 14%, 9% and 10% increase is reported when the void’s volume is decreased from 0.3 to 0.1 mm at a constant 75% infill density. The bead width and layer height have an inverse effect on voids volume.

This work brings values: a multiscale-geometric model capable of predicting the voids controllability by varying interraster distance, layer height and bead width. The idealized RVE generation slicer software and Solidworks save time and cost (<10 min, $0). The proposed model can effectively compute the mechanical properties together with the voids analysis.

The purpose of this study was to produce dimensionally accurate and reliable fused layer modeling (FLM) feedstock composed of an impact modified polypropylene matrix, compounded with a cellulose nanofiber (CNF) reinforcement and coupled by a maleic anhydride coupling agent to produce comparable mechanical properties in comparison to the industry-standard method of injection molding (IM).

A spray dried CNF (SDCNF) was compounded with the polymer matrix using a masterbatch method. The composite was diluted with neat polymer and extruded into a filament and then printed into standardized mechanical testing samples. For comparison, the filament was chopped and standardized samples were produced with IM.

A loss in mechanical properties of up to 30% was observed in FLM samples. If normalized to reflect improved density from a part consolidation method, losses are reduced to 15% or show improvements in the neat polymer matrix.

Limited research has been done on producing FLM feedstock, reporting mechanical property results based on standardized testing and comparing the same material with IM.

The rapid development of three-dimensional (3D) printing makes it familiar in daily life, especially the fused deposition modeling 3D printers. The process planning of traditional flat layer printing includes slicing and path planning to obtain the boundaries and the filling paths for each layer along the vertical direction. There is a clear division line through the whole fabricated part, inherited in the flat-layer-based printed parts. This problem is brought about by the seam of the boundary in each layer. Hence, the purpose of this paper is to propose a novel helical filling path generation with the ideal surface-plane intersection for a rotary 3D printer.

The detailed algorithm and implementation steps are given with several worked examples to enable readers to understand it better. The adjacent points obtained from the planar slicing are combined to generate each layer's helical points. The contours of all layers are traversed to obtain the helical surface layer and helical path. Meanwhile, the novel rotary four-degree of freedom 3D printer is briefly introduced.

As a proof of concept, this paper presents several examples based on the rotary 3D printer designed in the authors’ previous research and the algorithms illustrated in this paper. The preliminary experiments successfully verify the feasibility and versatility of the proposed slicing method based on a rotary 3D printer.

This paper provides a novel and feasible slicing method for multi-axis rotary 3D printers, making manufacturing thin-wall and complex parts possible. To further broaden the proposed slicing method’s application in further research, adaptive tool path generation for flat and curved layer printing could be applied with a combination of flat and curved layers in the same layer, different layers or even different parts of structures.

This paper aims to develop an integrated and portable desktop 3D printer using direct extruding technology to expand applied material field. Different from conventional fused deposition modeling (FDM) which uses polymer filaments as feedstock, the developed system can fabricate products directly using polymer pellets. And its printing properties are also investigated.

A conical screw-based extrusion deposition (CSBED) system was developed with a large taper conical screw to plasticize and extrude fed materials. The 3D printer was developed with assistance of precision positioning and controlling system. Biocompatible thermoplastic polyurethane (TPU) pellets were selected as raw materials for experiments. The influences of four processing parameters: nozzle temperature, fill vector orientation, layer thickness and infill density on the product’s internal structure and tensile properties were investigated.

It is concluded that the customized system has a high manufacturing accuracy with a diminutive global size and is suitable for printing soft materials such as TPU. Theoretical calculation shows the developed conical screw is more effective in plasticizing and extruding compared with conventional screw. Printed samples can achieve applicable tensile properties under harmonious parameter cooperation. Deposited materials are found to have voids among adjacent roads under unbefitting parameters.

The developed system efficiently improves material limitations compared to commercial FDM systems and exhibits great potential in medical field because soft materials such as biocompatible TPU pellets can be directly used.

This paper aims to provide a multi-objective optimization problem in design for manufacturing (DFM) approach for fused deposition modeling (FDM). This method considers the manufacturing criteria and constraints during the design by selecting the best manufacturing parameters to guide the designer and manufacturer in fabrication with FDM.

Topological optimization and bi-objective optimization problems are suggested to complete the DFM approach for design for additive manufacturing (DFAM) to define a product. Topological optimization allows the shape improvement of the product through a material distribution for weight gain based on the desired mechanical behavior. The bi-objective optimization problem plays an important role to evaluate the manufacturability by quantification and optimization of the manufacturing criteria and constraint simultaneously. Actually, it optimizes the production time, required material regarding surface quality and mechanical properties of the product because of two significant parameters as layer thickness and part orientation.

A comprehensive analysis of the existing DFAM approaches illustrates that these approaches are not developed sufficiently in terms of manufacturability evaluation in quantification and optimization levels. There is no approach that investigates the AM criteria and constraints simultaneously. It is necessary to provide a decision-making tool for the designers and manufacturers to lead to better design and manufacturing regarding the different AM characteristics.

To assess the efficiency of this approach, a wheel spindle is considered as a case study which shows how this method is capable to find the best design and manufacturing solutions.

A multi-criteria decision-making approach as the main contribution is developed to analyze FDM technology and its attributes, criteria and drawbacks. It completes the DFAM approach for FDM through a bi-objective optimization problem which deals with finding the best manufacturing parameters by optimizing production time and material mass because of the product mechanical properties and surface roughness.