Search results
1 – 7 of 7Mohamed El Boukhari, Ossama Merroun, Chadi Maalouf, Fabien Bogard and Benaissa Kissi
The purpose of this study is to experimentally determine whether mechanical properties of concrete can be improved by using olive pomace aggregates (OPA) as a substitute for…
Abstract
Purpose
The purpose of this study is to experimentally determine whether mechanical properties of concrete can be improved by using olive pomace aggregates (OPA) as a substitute for natural sand. Two types of OPA were tested by replacing an equivalent amount of natural sand. The first type was OPA mixed with olive mill wastewater (OMW), and the second type was OPA not mixed with OMW. For each type, two series of concrete were produced using OPA in both dry and saturated states. The percentage of partial substitution of natural sand by OPA varied from 0% to 15%.
Design/methodology/approach
The addition of OPA leads to a reduction in the dry density of hardened concrete, causing a 5.69% decrease in density when compared to the reference concrete. After 28 days, ultrasonic pulse velocity tests indicated that the resulting material is of good quality, with a velocity of 4.45 km/s. To understand the mechanism of resistance development, microstructural analysis was conducted to observe the arrangement of OPA and calcium silicate hydrates within the cementitious matrix. The analysis revealed that there is a low level of adhesion between the cement matrix and OPA at interfacial transition zone level, which was subsequently validated by further microstructural analysis.
Findings
The laboratory mechanical tests indicated that the OPCD_OPW (5) sample, containing 5% of OPA, in a dry state and mixed with OMW, demonstrated the best mechanical performance compared to the reference concrete. After 28 days of curing, this sample exhibited a compressive strength (Rc) of 25 MPa. Furthermore, it demonstrated a tensile strength of 4.61 MPa and a dynamic modulus of elasticity of 44.39 GPa, with rebound values of 27 MPa. The slump of the specimens ranged from 5 cm to 9 cm, falling within the acceptable range of consistency (Class S2). Based on these findings, the OPCD_OPW (5) formulation is considered optimal for use in concrete production.
Originality/value
This research paper provides a valuable contribution to the management of OPA and OMW (OPA_OMW) generated from the olive processing industry, which is known to have significant negative environmental impacts. The paper presents an intriguing approach to recycling these materials for use in civil engineering applications.
Details
Keywords
Stella Lippolis, Dario Dell’Osa and Ezio Ritrovato
Through the reconstruction of the events of some foreign entrepreneurs who worked in the territory of the Italian city of Bari in the first half of the 19th century, this paper…
Abstract
Purpose
Through the reconstruction of the events of some foreign entrepreneurs who worked in the territory of the Italian city of Bari in the first half of the 19th century, this paper aims to analyze the role of entrepreneurial migration in the economic development of Apulia land in this period.
Design/methodology/approach
This study adopts a theoretical framework that combines the concept of mixed embeddedness in a multifocal perspective, with the model of the diffusion of innovation focusing on the role of the so-called agency of actors, and of the network, in the dissemination of innovation. The theoretical framework is applied to multiple case studies to compare the evidence that emerged from the simultaneous analysis of several situations.
Findings
By analyzing how innovations have spread within the network of entrepreneurs of that time, it is possible to identify some relevant aspects related to the mechanisms of dissemination of innovations in the context of entrepreneurial migration. Specifically, the opportunity structure is intended in an even broader sense than indicated in the classic approach to mixed embeddedness: it is considered as the result of the joint interaction of the political, institutional and economic context of several places, and the behavioral dynamics of several groups.
Research limitations/implications
Due to the specific method chosen, the outcomes of the research might apply to a narrow context. Therefore, the results need to be tested and confirmed in further empirical studies, and by applying multiple research methods.
Practical implications
Findings are useful and significant in the analysis of the link that exists between the diffusion of innovations and migrant entrepreneurship, and then the conclusions can be applied and extended to the current phenomenon of migration-related innovations, with specific reference to developing countries.
Social implications
Findings can be applied and extended to the current phenomenon of migration-related innovations and highly skilled migration, with specific reference to developing countries.
Originality/value
This paper contributes to shed new light on the contextual and multifocal factors that influence the development of innovations in the networks of migrant entrepreneurship, in a specific historical period and a specific context. Combining social, human and financial capital with the wider opportunity structure, this study also provides a comprehensive understanding of the modalities through which migrant and high-skilled entrepreneurs could innovate.
Details
Keywords
The purpose of this paper is to give compiled information on previously applied cotton fabric surface modifications. The paper covered most of the modifications done on cotton…
Abstract
Purpose
The purpose of this paper is to give compiled information on previously applied cotton fabric surface modifications. The paper covered most of the modifications done on cotton fabric to improve its properties or to add some functional properties. The paper presented mostly studied research works that brought a significant surface improvement on cotton fabric.
Design/methodology/approach
Different previous works on surface modifications of cotton fabrics such as pilling, wrinkle and microbial resistance, hydrophobicity, cationization, flame retardancy and UV-protection characteristics were studied and their methods of modification including the main findings are well reported in this paper.
Findings
Several modification treatments on surface modification of cotton fabrics indicated an improvement in the desired properties in which the modification is needed. For instance, the pilling tendency, wrinkling, microbial degradation and UV degradation drawbacks of cotton fabric can be overcome through different modification techniques.
Originality/value
To the best of the author’s knowledge, there are no compressive documents that covered all the portions presented in this review. The author tried to cover the surface modifications done to improve the main properties of cotton fabric.
Details
Keywords
Pankaj Naharwal, Mahesh Meena, Charul Somani, Neetu Kumari and Dinesh Kumar Yadav
This paper aims to critically review the isolation and chemistry of plant pigments.
Abstract
Purpose
This paper aims to critically review the isolation and chemistry of plant pigments.
Design/methodology/approach
A literature survey from 1974 to 2022 was carried out and studied thoroughly. The authors reviewed literature in various areas such as isolation methods and catalytic properties of pigments.
Findings
With vast growing research in the field of catalytic activities of various pigments like chlorophyll, anthocyanin and flavonoids, there is still scope for further research for the pigments such as Lycopene, carotenoids and xanthophyll as there has not been any significant work in this area.
Research limitations/implications
Plant pigments may be used as an ecofriendly catalyst for chemical reactions.
Practical implications
One can get the direction of pigment research.
Social implications
Plant pigments are natural and ecofriendly catalyst which can reduce the pollution.
Originality/value
This is an original work. This paper precisely depicts the advantages as well as disadvantages of the isolation techniques of pigments. This study also presents the chemistry of plant pigments.
Graphical abstract
Details
Keywords
Qi Yang, ZhiQiang Feng, RuanBing Zhang, YunPu Wang, DengLe Duan, Qin Wang, XiaoYu Zou and YuHuan Liu
This study aims to develop a green, economical and efficient ultrasonic-/microwave assisted extraction (UMAE) process for the extraction of anthocyanins.
Abstract
Purpose
This study aims to develop a green, economical and efficient ultrasonic-/microwave assisted extraction (UMAE) process for the extraction of anthocyanins.
Design/methodology/approach
After optimizing the extraction conditions by response surface methodology, three assays including DPPH, ABTS·+, FRAP were applied to analyze the antioxidant activity of the extracted anthocyanins. The stability under different temperatures, reductant concentrations and pHs was also discussed. The components of anthocyanins in blueberry were analyzed by HPLC-QTOF-MS2.
Findings
The optimal extraction parameters were ultrasonic power of 300 W, microwave power of 365.28 W and solid–liquid ratio of 30 (g/mL). The possible structures can be speculated as Delphinidin-3-O-galactoside, Delphinidin, Petunidin, Delphinidin-3-O-glucoside, Petunidin-3-O-glucoside, Cyanidin-3-O-glucoside. The results demonstrated that the UMAE can improve the yield of anthocyanins in shorter extraction time with higher activity.
Originality/value
The present study may provide a promising and feasible route for extracting anthocyanins from blueberries and studying their physicochemical properties, ultimately promoting the utilization of blueberry anthocyanins.
Details
Keywords
Lucrezia Sgambaro, Davide Chiaroni, Emanuele Lettieri and Francesco Paolone
The purpose of this paper is to investigate the most recurrent variables characterizing the collaborative relationships of industrial symbiosis (IS) (hereinafter also referred to…
Abstract
Purpose
The purpose of this paper is to investigate the most recurrent variables characterizing the collaborative relationships of industrial symbiosis (IS) (hereinafter also referred to as “anatomic” variables) established in the attempt to adopt circular economy (CE) by collecting evidence from a rich empirical set of implementation cases in Italy.
Design/methodology/approach
The current literature on IS was reviewed, and a content analysis was performed to identify and define the “anatomic” variables affecting its adoption in the circular economy. We followed a multiple-case study methodology investigating 50 cases of IS in Italy and performed a content analysis of the “anatomic” variables characterizing each case.
Findings
This research proposes the “anatomic” variables (i.e. industrial sectors involved, public actors involvement, governmental support, facilitator involvement and geographical proximity) explaining the cases of IS in the circular economy. Each “anatomic” variable is discussed at length based on the empirical evidence collected, with a particular reference to the impact on the different development strategies (i.e. “bottom-up” and “top-down”) in the cases observed.
Originality/value
Current literature on IS focuses on a sub-set of variables characterizing collaboration in IS. This research builds on extant literature to define a new framework of five purposeful “anatomic” variables defining IS in the circular economy. Moreover, we also collect and discuss a broad variety of empirical evidence in what is a still under-investigated context (i.e. Italy).
Details
Keywords
K.G. Rumesh Samarawickrama, U.G. Samudrika Wijayapala and C.A. Nandana Fernando
The purpose of this study is to extract and characterize a novel natural dye from the leaves of Lannea coromandelica and the extraction with finding ways of dyeing cotton fabric…
Abstract
Purpose
The purpose of this study is to extract and characterize a novel natural dye from the leaves of Lannea coromandelica and the extraction with finding ways of dyeing cotton fabric using three mordants.
Design/methodology/approach
The colouring agents were extracted from the leaves of Lannea coromandelica using an aqueous extraction method. The extract was characterized using analysis methods of pH, gas chromatography-mass spectrometry (GC-MS), Fourier transform infrared (FTIR), ultraviolet-visible (UV-vis) and cyclic voltammetry measurement. The extract was applied to cotton fabric samples using a non-mordant and three mordants under the two mordanting methods. The dyeing performance of the extracted colouring agent was evaluated using colour fastness properties, colour strength (K/S) and colour space (CIE Lab).
Findings
The aqueous dye extract showed reddish-brown colour, and its pH was 5.94. The GC-MS analysis revealed that the dye extract from the leaves of Lannea coromandelica contained active chemical compounds. The UV-vis and FTIR analyses found that groups influenced the reddish-brown colour of the dye extraction. The cyclic voltammetry measurements discovered the electrochemical properties of the dye extraction. The mordanted fabric samples showed better colour fastness properties than the non-mordanted fabric sample. The K/S and CIE Lab results indicate that the cotton fabric samples dyed with mordants showed more significant dye affinities than non-mordanted fabric samples.
Originality/value
Researchers have never discovered that the Lannea coromandelica leaf extract is a natural dye for cotton fabric dyeing. The findings of this study showed that natural dyes extracted from Lannea coromandelica leaf could be an efficient colouring agent for use in cotton fabric.
Details