Search results

Accordingly to the recent multi-scale model proposed by Sih and Tang, different orders of stress singularities are related to different material dependent boundary conditions associated with the interaction between the V-notch tip and the material under the remotely applied loading conditions. This induces complex three-dimensional stress and displacement fields in the proximity of the notch tip, which are worthy of investigation. The paper aims to discuss these issues.

Starting from Sih and Tang’s model, in the present contribution the authors propose some analytical expressions for the calculation of the strain energy density (SED) averaged over a control volume embracing the V-notch tip. The expressions vary as a function of the different boundary conditions. Dealing with the specific crack case, the results from the analytical frame are compared with those determined numerically under linear-elastic hypotheses, by applying different constraints to the through-the-thickness crack edges in three-dimensional discs subjected to Mode III loading. Free-free and free-clamped cases are considered.

Due to three-dimensional effects, the application of a nominal Mode III loading condition automatically provokes coupled Modes (I and II). Not only the intensity of the induced modes but also their degree of singularity depend on the applied conditions on the crack flanks. The variability of local SED through the thickness of the disc is analysed by numerical analyses and compared with the theoretical trend.

The capability of the SED to capture the combined three-dimensional effects is discussed in detail showing that this parameter is particularly useful when the definition of the stress intensity factors (SIFs) is ambiguous or the direct comparison between SIFs with odd dimensionalities is not possible.

This paper aims to study the static behavior of carbon nanotubes (CNTs) reinforced functionally graded shells using an efficient solid-shell element with parabolic transverse shear strain. Four different types of reinforcement along the thickness are considered.

Furthermore, the developed solid-shell element allows an efficient and accurate analysis of CNT-reinforced functionally graded shells under linear static conditions.

The validity and accuracy of the developed solid-shell element are illustrated through the solution of deflection and stress distribution problems of shell structures taken from the literature. The influences of some geometrical and material parameters on the static behavior of shell structures are discussed.

The finite element formulation is based on a modified first-order enhanced solid-shell element formulation with an imposed parabolic shear strain distribution through the shell thickness in the compatible strain part. This formulation guarantees a zero transverse shear stress on the top and bottom surfaces of the shell and the shear correction factors is no longer needed.

The authors examined the numerical natural frequency analysis of a 2D functionally graded (FG) truncated thick hollow cone using 3D elasticity theory.

The material properties of the 2D-FGM (two dimensional-functionally graded materials) cone are graded along the radial and axial axes of the cone using a power–law distribution. The eigenvalue problem was solved using finite element analysis (FEA) employing graded hexahedral elements, and the verification of the finite element approach was assessed by comparing the current solution to earlier experimental studies.

The effects of semivertex angle, material distribution and the cone configuration on the natural frequencies have been analyzed. For various semivertex angles, thickness, length and power law exponents, many results in the form of natural frequencies and mode shapes are presented for the 2D-FGM cone. As a result, the effects of the given parameters were addressed, and the results were compared, demonstrating the direct efficiency of raising the power–law exponents and cone thickness on the rise of natural frequencies.

For the first time, the numerical natural frequency analysis of a 2D-FG truncated thick hollow truncated cone based on 3D equations of elasticity has been investigated. The material properties of the truncated cone have been distributed along two directions, which has not been considered before in any research for the truncated thick cone. The reason for using these innovative volume fraction functions is the lack of accurate coverage by functions that are available in the literature (Asemi et al., 2011; Babaei et al. 2021).

The purpose of this work is to apply the Fourier–Ritz method to study the vibration behavior of the moderately thick functionally graded (FG) parabolic and circular panels and shells of revolution with general boundary conditions.

The modified Fourier series is chosen as the basis function of the admissible functions of the structure to eliminate all the relevant discontinuities of the displacements and their derivatives at the edges, and the vibration behavior is solved by means of the Ritz method. The complete shells of revolution can be achieved by using the coupling spring technique to imitate the kinematic compatibility and physical compatibility conditions of FG parabolic and circular panels at the common meridian of θ = 0 and 2π. The convergence and accuracy of the present method are verified by other contributors.

Some new results of FG panels and shells with elastic restraints, as well as different geometric and material parameters, are presented and the effects of the elastic restraint parameters, power-law exponent, circumference angle and power-law distributions on the free vibration characteristic of the panels are also presented, which can be served as benchmark data for the designers and engineers to avoid the unpleasant, inefficient and structurally damaging resonant.

The paper could provide the reference for the research about the moderately thick FG parabolic and circular panels and shells of revolution with general boundary conditions. In addition, the change of the boundary conditions can be easily achieved by just varying the stiffness of the boundary restraining springs along all the edges of panels without making any changes in the solution procedure.

With the widespread use of the composites over other metallic materials in different fields of engineering, studies on damages of composite structures have assumed great importance. Among various kinds of damages, delamination is of very serious concern to composite applications. It may arise as a consequence of impact loading, stress concentration near a geometrical or material discontinuity or manufacturing defects. The presence of one or more delaminations in the composite laminate may lead to a premature collapse of the structure due to buckling at a lower level of compressive loading. So the effect of delamination on stability of composite structures needs attention and thus constitutes a problem of current interest. The purpose of this paper is to deal with both numerical and experimental investigations on buckling behaviour of single and multiple, delaminated, industry driven, woven roving glass/epoxy composite plates on clamped free clamped free (CFCF) rectangular plates.

For numerical analysis, a finite element model was developed with an eight noded two dimensional quadratic isoparametric element having five degrees of freedom per node. The elastic stiffness matrices were derived using linear first order shear deformation theory with a shear correction factor. Green's nonlinear strain equations are used to derive the geometric stiffness matrix. The computation of buckling load based on present formulation is compared with the experimental results for the effect of different parameters on critical load of the delaminated composite panels. In the experimental study, the influences of various parameters such as delamination area, fiber orientations, number of layers, aspect ratios on the buckling behaviour of single and multiple delaminated woven roving glass/epoxy composite plates were investigated. Buckling loads were measured by INSTRON 1195 machine for the delaminated composite plates.

Comparison of numerical results with experimental results showed a good agreement. Both the results revealed that the area of delaminations, fiber orientations, number of layers and aspect ratio have paramount influence on the buckling behaviour of delaminated plate.

The present study is part of Jayaram Mohanty's doctoral thesis, an original research work.

In this paper, based on the density functional theory (DFT) and finite element method (FEM), the elastic, buckling and vibrational behaviors of the monolayer bismuthene are studied.

The computed elastic properties based on DFT are used to develop a finite element (FE) model for the monolayer bismuthene in which the Bi-Bi bonds are simulated by beam elements. Furthermore, mass elements are used to model the Bi atoms. The developed FE model is used to compute Young's modulus of monolayer bismuthene. The model is then used to evaluate the buckling force and fundamental natural frequency of the monolayer bismuthene with different geometrical parameters.

Comparing the results of the FEM and DFT, it is shown that the proposed model can predict Young's modulus of the monolayer bismuthene with an acceptable accuracy. It is also shown that the influence of the vertical side length on the fundamental natural frequency of the monolayer bismuthene is not significant. However, vibrational characteristics of the bismuthene are significantly affected by the horizontal side length.

DFT and FEM are used to study the elastic, vibrational and buckling properties of the monolayer bismuthene. The developed model can be used to predict Young's modulus of the monolayer bismuthene accurately. Effect of the vertical side length on the fundamental natural frequency is negligible. However, vibrational characteristics are significantly affected by the horizontal side length.

FOR some time industry has been preoccupied with the question of management. It is generally agreed that in the United States the services of management consultants are engaged by at least 75 % of the principal industrial enterprises, hospitals and chief educational establishments. In this country, too, there is growing reliance on the same kind of aid.

The stress state near the notch affects fatigue damage directly, but quantifying the stress field is difficult. The purpose of this study is to provide a mathematical description method of the stress field near the notch to achieve a reliable assessment of the fatigue life of notched specimens.

Firstly, the stress distribution of notched specimens of different materials and shapes under different stress levels is investigated, and a method for calculating the stress gradient impact factor is presented. Then, the newly defined stress gradient impact factor is used to describe the stress field near the notch, and an expression for the stress at any point along a specified path is developed. Furthermore, by combining the mathematical expressions for the stress field near the notch, a multiaxial fatigue life prediction model for notched shaft specimens is established based on the damage mechanics theory and closed solution method.

The stress gradient factor for notched specimens with higher stress concentration factors (V60-notch, V90-notch) varies to a certain extent when the external load and material change, but for notched specimens with relatively lower stress concentration factors (C-notch, U-notch, stepped shaft), the stress gradient factor hardly varies with the change in load and material, indicating that the shape of the notch has a greater influence on the stress gradient. It is also found that the effect of size on the stress gradient factor is not obvious for notched specimens with different shapes, there is an obvious positive correlation between the normal stress gradient factor and the normal stress concentration factor compared with the relationship between the shear stress gradient factor and the stress concentration factor. Moreover, the predicted results of the proposed model are in better agreement with the experimental results of five kinds of materials compared with the FS model, the SWT model, and the Manson–Coffin equation.

In this paper, a new stress gradient factor is defined based on the stress distribution of a smooth specimen. Then, a mathematical description of the stress field near the notch is provided, which contains the nominal stress, notch size, and stress concentration factor which is calculated by the finite element method (FEM). In addition, a multiaxial fatigue life prediction model for shaft specimens with different notch shapes is established with the newly established expressions based on the theory of damage mechanics and the closed solution method.