Search results

This study aims to investigate the influence of commercially available resins in water-based magenta pigment inkjet ink formulations on the properties of ink printability and the characteristics of ink application in food packaging. The impact of the resin on the jettability of the existing printability phase diagrams was also assessed.

Inks with different resin loadings were tested for selected properties, such as viscosity, particle size and surface tension. Stability was determined using a Turbiscan AGS turbidimeter and LumiFuge photocentrifuge analyzer. The ink layer fastness against abrasion and foodstuffs was evaluated using an Ugra device and according to PN-EN 646, respectively. JetXpert was used to assess Ricoh printhead jetting performance.

Printability diagrams successfully characterized the jettability of polyurethane inkjet inks on a multi-nozzle printhead and the binder improved droplet formation and printing precision.

Magenta water-based inkjet inks with commercial resins have been developed for printing on paper substrates. To the best of the authors’ knowledge, for the first time, inkjet ink stability was evaluated using the Turbiscan AGS and LumiFuge analyzers, and jettability models were verified using an industrial multi-nozzle printhead.

Wearing clothes requires specifications for feeling comfortable, derived from the fibres, fabrics and finishing properties. This study aims to deal with the effect of economic blends containing hollow fibres, bamboo and cotton/polyester waste on the mechanical properties of the produced fabrics and the appropriate end use.

This research included two blends: one consisted of cotton/polyester wastes blended with bamboo and the other to which Chorisia fibres were added. Two weft counts 10,6/1 Ne were made from each blend, which were used to produce four fabric samples (S1 Chorisia-free and S2 with Chorisia); additionally, another two samples were dyed that contain Chorisia (S3) from each count. The six samples were tested by Kawabata Evaluation System (KES).

The samples gave a good total hand value (THV) for use as men's winter suits, where the thicker count 6/1, with and without Chorisia had better properties, also both counts 6, 10/1 with dye. The hollow fibres affected the fabrics’ properties, including thickness, shear, bending, thermal conductivity and weight. Both blends had a positive effect on THV.

Cotton/polyester waste, Chorisia and bamboo fibres were tested, and 2% Remazol Yellow GNL dye was used.

The ratio of blending, weft counts and dye affected the fabric’s properties, with consequences for the use of the Kawabata system and its applications.

The fabrics used in this research may be considered to be economical and have good THV.

The study proved the usefulness of fabrics made of two blends. The Chorisia component may be seen as a good alternative to cotton fibres to reduce the cost of producing high-consumption winter suit fabrics.

Fresh vegetables contain advantageous phytochemical components, making them one of the most significant sources of nutrition. The threat of harmful bacteria still exists because these vegetables are not heated in restaurants before being consumed. Therefore, this study aimed to evaluate the microbial quality of fresh vegetables in restaurants of different levels.

A total of 499 fresh vegetable samples (from sandwiches and fresh-cut vegetable salads) were collected from 3 different types of food service establishment: 201 from international restaurants (IRs), 210 from national restaurants (NRs), and 88 from cafeterias (CAs). The samples were prepared and inoculated on specific growth media. The aerobic mesophilic bacteria (AMB) Campylobacter spp., Staphylococcus aureus (S. aureus), Enterobacteriaceae, Escherichia coli (E. coli) and yeast and molds were counted, and Listeria monocytogenes, Salmonella spp. and Escherichia coli O157 were detected using specialized medium.

High counts of S. aureus, above 3 log cfu/g, suggested that 71.5% of samples collected from NRs and 77.3% from CA were not accepted, whereas 81.6% of samples collected from IRs were accepted. The low population of E. coli, less than 2 log cfu/g, suggested that 99.0, 97 and 92.0 % of samples collected from IRs, NRs and CA, respectively, were accepted. Listeria monocytogenes and Escherichia coli O157 were absent from every sample. One sample was positive for Salmonella spp. in each of the NR and CA sample groups.

RIs adhere to health and hygiene standards better than NRs and CAs, according to the findings of vegetable contamination tests.

Three-dimensional (3D) printing is popular for many applications including the production of photocatalysts. This paper aims to focus on developing of 3D-printed photocatalyst-nano composite lattice structure. Digital light processing (DLP) 3D printing of photocatalyst composites was performed using photosensitive resin mixed with 0.5% Wt. of TiO₂ powder and varying amounts (0.025% Wt. to 0.2% Wt.) of graphene nanoplatelet powder. The photocatalytic efficiency of DLP 3D-printed photocatalyst TiO₂ composite was investigated, and the effects of nano graphite powder incorporation on the photocatalytic activity, thermal and mechanical properties were investigated.

Methods involve 3D computer-aided design modeling, printing parameters and comprehensive characterization techniques such as structural equation modeling, X-ray diffraction, thermogravimetric analysis, Fourier-transform infrared (FTIR) and mechanical testing.

Results highlight successful dispersion and characteristics of TiO₂ and graphene nanoplatelet (GNP) powders, intricate designs of 3D-printed lattice structures, and the influence of GNPs on thermal behavior and mechanical properties.

The study suggests applicability in wastewater treatment and environmental remediation, showcasing the adaptability of 3 D printing in designing effective photocatalysts. Future research should focus on practical applications and the long-term durability of these 3D-printed composites.

This paper aims to model the price of cellar tours using a hedonic pricing approach. The authors analyze the complex relationship between the price of an add-on (here, cellar tours) and the price of the reference product (here, wine).

Thanks to a large database containing information on about 1,000 winery experiences, the authors regress the price of cellar tours on wine prices and on a broad set of objective characteristics that are (1) tour specific and (2) common to all tours offered by the winery. These exogenous controls include the type and style of experience offered, amenities and winemaking characteristics.

The authors show that the price of cellar tours follows the price of the most expensive wine sold by the winery, which is a proxy for reputation. The authors find that one of the main determinants of cellar tour prices is visit length: wineries charge more for longer experiences. The number of wines tasted during the visit also increases the price. Prices are higher in places where there is a high level of wine tourism activity, which might be a sign of authenticity.

Wine producers in different countries need to gain insights on how to price cellar tours, which are composite goods. The results can help practitioners price their winery experience according to common practices in different wine regions. The results may also be of interest to professionals in the tourism sector who are in charge of the pricing of by-products (e.g. tee-shirts, books, etc.), or for luxury fashion labels extending their brand in the catering industry with cafes and restaurants.

To the best of the authors’ knowledge, this paper is the first empirical analysis that examines the complex relationship between the price of an add-on and the price of the reference product in the context of wine tourism.

This paper aims to devise a case-controlled method combined with Bradford Hill criteria for causal inference of contractual disputes in construction projects. It is a genuine attempt in a systematic method from research design to execution for causal issues where only observational data is available.

The authors located insufficient top management support as the putative pathogen of construction disputes based on a literature review, an interview and Delphi surveys. A questionnaire survey was then conducted to collect case-controlled data to ensure comparability, in which for each disputed project put in the experimental group, the authors sought for a dispute-free project of similar characteristics. The incidence rates of insufficient top management support in the experimental and control groups were then examined by Bradford Hill criteria as an alternative to the test of intervention effect.

The association of insufficient top management support and construction disputes was tested to conform with the Bradford Hill criteria with case-controlled data where applicable and logical deduction where statistical tests were not applicable. With a clear, positive, reasonable and statistically significant association, while excluding methodological biases, confounding and chance, the authors reached a causal verdict of insufficient top management support causing contractual disputes.

This paper supports the validity of applying a case-controlled method combined with Bradford Hill criteria in investigating causal issues in project management, especially the verdict of causal inference based on empirical data. In addition, the located root cause of contractual disputes could inform project management personnel with reasoned strategies for dispute avoidance.

The criteria importance through intercriteria correlation (CRITIC) and range of value (ROV) combined methods were used to determine a single index for all multiple responses.

This paper used cold metal transfer (CMT) and pulse metal-inert gas (MIG) welding processes to study the weld-on-bead geometry of AA2099-T86 alloy. This study used Taguchi's approach to find the optimal setting of the input welding parameters. The welding current, welding speed and contact-tip-to workpiece distance were the input welding parameters for finding the output responses, i.e. weld penetration, dilution and heat input. The L9 orthogonal array of Taguchi's approach was used to find out the optimal setting of the input parameters.

The optimal input welding parameters were determined with combined output responses. The predicted optimum welding input parameters were validated through confirmation tests. Analysis of variance showed that welding speed is the most influential factor in determining the weld bead geometry of the CMT and pulse MIG welding techniques.

The heat input and weld bead geometry are compared in both welding processes. The CMT welding samples show superior defect-free weld beads than pulse MIG welding due to lesser heat input and lesser dilution.

Additive manufacturing also known as 3D printing is an evolving advanced manufacturing technology critical for the new era of complex machinery and operating systems. Manufacturing systems are increasingly faced with risk of attacks not only by traditional malicious actors such as hackers and cyber-criminals but also by some competitors and organizations engaged in corporate espionage. This paper aims to elaborate a plausible risk practice of designing and demonstrate a case study for the compromised-based malicious for polymer 3D printing system.

This study assumes conditions when a machine was compromised and evaluates the effect of post compromised attack by studying its effects on tensile dog bone specimens as the printed object. The designed algorithm removed predetermined specific number of layers from the tensile samples. The samples were visually identical in terms of external physical dimensions even after removal of the layers. Samples were examined nondestructively for density. Additionally, destructive uniaxial tensile tests were carried out on the modified samples and compared to the unmodified sample as a control for various mechanical properties. It is worth noting that the current approach was adapted for illustrating the impact of cyber altercations on properties of additively produced parts in a quantitative manner. It concurrently pointed towards the vulnerabilities of advanced manufacturing systems and a need for designing robust mitigation/defense mechanism against the cyber altercations.

Density, Young’s modulus and maximum strength steadily decreased with an increase in the number of missing layers, whereas a no clear trend was observed in the case of % elongation. Post tensile test observations of the sample cross-sections confirmed the successful removal of the layers from the samples by the designed method. As a result, the current work presented a cyber-attack model and its quantitative implications on the mechanical properties of 3D printed objects.

To the best of the authors’ knowledge, this is the original work from the team. It is currently not under consideration for publication in any other avenue. The paper provides quantitative approach of realizing impact of cyber intrusions on deteriorated performance of additively manufactured products. It also enlists important intrusion mechanisms relevant to additive manufacturing.

Based on the affective events and self-concept theories, this study aims to examine the relationship between knowledge sharing system, job crafting, meaningfulness in work and employees' intention to stay with the organization.

In the present study, the authors conducted a time-lagged survey for analyzing the association between knowledge sharing system, job crafting, meaningfulness in work and employees' intention to stay with the organization. The study sample comprises 358 Generation Y employees working in Indian IT organizations. Results were analyzed using Process and Hayes macro process.

The study findings suggest significant relationships between knowledge sharing system, job crafting, meaningfulness in work and intention to stay among Gen Y employees. Moreover, the results demonstrated that knowledge sharing system, directly and indirectly, impacts employees' intention to stay via sequential mediation of job crafting and meaningfulness in work.

In today's era of hyper-competition and “war for talent,” retaining talented professionals has become the topmost priority for organizations. This becomes even more challenging with new generations, Gen Y and Z, entering the workforce driven by entirely different needs compared to earlier generations. Thus, the present study offers an integrated framework that organizational practitioners could utilize to enhance the retention of their young talented professionals.

Despite the emerging interest in the concept of knowledge sharing, few studies investigated the association between knowledge sharing system and intention to stay among Gen Y employees. Also, research still lacks in examining the underlying mechanism of how knowledge sharing system may enhance job crafting and meaningfulness in work, which could fuel Gen Y employees' intention to stay with the organization.

Firms can benefit from designing sales promotion based on the analysis of consumers' physical exercise and purchase data. This study aims to study mobile exercise app data to explore how purchasing a promoted or nonpromoted product affects exercisers’ subsequent exercise and purchase behaviors.

Drawing from the theoretical framework of overjustification effect, this study empirically examines the effects of the purchase of promoted – monetary and nonmonetary – or nonpromoted products on relationships (1) between past and subsequent exercise behaviors and (2) between past exercise and subsequent purchase behaviors. Novel data of one million exercise activities and purchase transactions created by 7,517 mobile exercise app users were collected.

The results reveal that monetary and nonmonetary promotions have a negative effect on overall consumers’ amount of physical exercise but increase heavy exercisers’ exercise amount. In addition, nonmonetary (monetary) promotion has a positive (negative) effect on consumers’ purchase expenditure but has no moderating effect on the exercise–expenditure relationship.

This study provides a theoretical framework explaining how to mitigate the dark side of sales promotions while targeting right exercise consumer segments with the right promotion campaigns.