Search results

The flexible mode transitions, multiple power sources and system uncertainty lead to challenges for mode transition control of four-wheel-drive hybrid powertrain. Therefore, the purpose of this paper is to improve dynamic performance and fuel economy in mode transition process for four-wheel-drive hybrid electric vehicles (HEVs), overcoming the influence of system uncertainty.

First, operation modes and transitions are analyzed and then dynamic models during mode transition process are established. Second, a robust mode transition controller based on radial basis function neural network (RBFNN) is proposed. RBFNN is designed as an uncertainty estimator to approximate lumped model uncertainty due to modeling error. Based on this estimator, a sliding mode controller (SMC) is proposed in clutch slipping phase to achieve clutch speed synchronization, despite disturbance of engine torque error, engine resistant torque and clutch torque. Finally, simulations are carried out on MATLAB/Cruise co-platform.

Compared with routine control and SMC, the proposed robust controller can achieve better performance in clutch slipping time, engine torque error, vehicle jerk and slipping work either in nominal system or perturbed system.

The mode transition control of four-wheel-drive HEVs is investigated, and a robust controller based on RBFNN estimation is proposed. Compared results show that the proposed controller can improve dynamic performance and fuel economy effectively in spite of the existence of uncertainty.

This study aims to improve the maneuverability and stability of four-wheel chassis in a small paddy field; a front axle swing steering four-wheel chassis with optimal steering is designed.

When turning, the front inner wheel stops and the rear inner wheel is in the following state. The hydraulic drive system of the walking wheel adopts a driving mode in which two front-wheel motors are connected in series and two rear wheel motors in parallel. The chassis uses a combination of a gasoline engine with a water cooling system, a CVT continuously variable transmission and a hydraulic drive system to increase the control capability. The front axle rotary chassis adopts a step-less variable speed engine and a hydraulic control system to solve the hydraulic stability of the chassis in uphill and downhill conditions so as to effectively control the over-speed of the wheel-side drive motors. Through the quadratic orthogonal rotation combination design test, the mathematical models of uphill and downhill front-wheel pressures and test factors are established.

The results show that the chassis stability is optimal when the back pressure is 0.5 MPa, and the rotating slope is 4°. The uphill and downhill pressures of the front wheels are 2.38 MPa and 1.5 MPa, respectively.

The influence of external changes on the pressure of hydraulic motors is studied through experiments, which lays the foundation for further research.

The purpose of this study is to propose a torque vectoring control system for improving the handling stability of distributed drive electric buses under complicated driving conditions. Energy crisis and environment pollution are two key pressing issues faced by mankind. Pure electric buses are recognized as the effective method to solve the problems. Distributed drive electric buses (DDEBs) as an emerging mode of pure electric buses are attracting intense research interests around the world. Compared with the central driven electric buses, DDEB is able to control the driving and braking torque of each wheel individually and accurately to significantly enhance the handling stability. Therefore, the torque vectoring control (TVC) system is proposed to allocate the driving torque among four wheels reasonably to improve the handling stability of DDEBs.

The proposed TVC system is designed based on hierarchical control. The upper layer is direct yaw moment controller based on feedforward and feedback control. The feedforward control algorithm is designed to calculate the desired steady-state yaw moment based on the steering wheel angle and the longitudinal velocity. The feedback control is anti-windup sliding mode control algorithm, which takes the errors between actual and reference yaw rate as the control variables. The lower layer is torque allocation controller, including economical torque allocation control algorithm and optimal torque allocation control algorithm.

The steady static circular test has been carried out to demonstrate the effectiveness and control effort of the proposed TVC system. Compared with the field experiment results of tested bus with TVC system and without TVC system, the slip angle of tested bus with TVC system is much less than without TVC. And the actual yaw rate of tested bus with TVC system is able to track the reference yaw rate completely. The experiment results demonstrate that the TVC system has a remarkable performance in the real practice and improve the handling stability effectively.

In view of the large load transfer, the strong coupling characteristics of tire , the suspension and the steering system during coach corning, the vehicle reference steering characteristics is defined considering vehicle nonlinear characteristics and the feedforward term of torque vectoring control at different steering angles and speeds is designed. Meanwhile, in order to improve the robustness of controller, an anti-integral saturation sliding mode variable structure control algorithm is proposed as the feedback term of torque vectoring control.

The purpose of this paper is to evaluate the locomotion performance of all‐terrain rovers employing rocker‐type suspension system.

In this paper, a robot with advanced mobility features is presented and its locomotion performance is evaluated, following an analytical approach via extensive simulations. The vehicle features an independently controlled four‐wheel‐drive/4‐wheel‐steer architecture and it also employs a passive rocker‐type suspension system that improves the ability to traverse uneven terrain. An overview of modeling techniques for rover‐like vehicles is introduced. First, a method for formulating a kinematic model of an articulated vehicle is presented. Next, a method for expressing a quasi‐static model of forces acting on the robot is described. A modified rocker‐type suspension is also proposed that enables wheel camber change, allowing each wheel to keep an upright posture as the suspension conforms to ground unevenness.

The proposed models can be used to assess the locomotion performance of a mobile robot on rough‐terrain for design, control and path planning purposes. The advantage of the rocker‐type suspension over conventional spring‐type counterparts is demonstrated. The variable camber suspension is shown to be effective in improving a robot's traction and climbing ability.

The paper can be of great value when studying and optimizing the locomotion performance of mobile robots on rough terrain. These models can be used as a basis for advanced design, control and motion planning.

The paper describes an analytical approach for the study of the mobility characteristics of vehicles endowed with articulated suspension systems. A variable camber mechanism is also presented.

IN a departure from usual practice this issue concentrates to a large extent upon a single subject — Mechanical Handling. It coincides with that industry's exhibition at Earls Court from the 9th to 19th of this month, to be opened by the Rt. Hon. Christopher Chataway, M.P., Minister for Industrial Development. In consequence it was necessary to defer some regular features for a time, for which we apologise.

Building inspection tasks usually involve working at life‐threatening height, especially for high‐rise buildings. The purpose of this paper is to introduce two service robots which are designed for high‐rise building inspection applications.

The first service robot, equipped with independent‐climbing capability, is applied to gas pipe inspection. The robot requires very little setup time and is suitable for some small inspection tasks. The second, which shares some similarities of industrial gondolas, is applied to check the health conditions of tile‐walls of high‐rise buildings. This robot requires more initial setup time but can provide faster inspection operations. In addition, it can be programmed to carry out the inspection task automatically. So, it is more suitable for large‐scale inspection tasks.

For tile‐wall inspection, a fast, low‐cost and effective non‐destructive testing technique based on impact acoustic method has been developed for the robot.

Both prototypes have been applied to housing estates for evaluation purposes.

This paper aims to present a prototype of medical transportation robot whose positioning accuracy can reach millimeter-level in terms of patient transportation. By using this kind of mobile robot, a fully automatic image diagnosis process among independent CT/PET devices and the image fusion can be achieved.

Following a short introduction, a large-load 4WD-4WS (four-wheel driving and four-wheel steering) mobile robot for carrying patient among multiple medical imaging equipments is developed. At the same time, a specially designed bedplate with self-locking function is also introduced. For further improving the positioning accuracy, the authors proposed a calibration method based on Gaussian process regression (GPR) to process the measuring data of the sensors. The performance of this robot is verified by the calibration experiment and Image fusion experiment. Finally, concluding comments are drawn.

By calibrating the robot’s positioning system through the proposed GPR method, one can obtain the accuracy of the robot’s offset distance and deflection angle, which are 0.50 mm and +0.21°, respectively. Independent repeated trials were then set up to verify this result. Subsequent phantom experiment shows the accuracy of image fusion can be accurate within 0.57 mm in the front-rear direction and 0.83 in the left-right direction, respectively, while the clinical experiment shows that the proposed robot can practically realize the transportation of patient and image fusion between multiple imaging diagnosis devices.

The proposed robot offers an economical image fusion solution for medical institutions whose imaging diagnosis system basically comprises independent MRI, CT and PET devices. Also, a fully automatic diagnosis process can be achieved so that the patient’s suffering of getting in and out of the bed and the doctor’s radiation dose can be obviated.

The general bedplate presented in Section 2 that can be mounted on the CT and PET devices and the self-locking mechanism has realized the catching and releasing motion of the patient on different medical devices. They also provide a detailed method regarding patient handling and orientation maintenance, which was hardly mentioned in previous research. By establishing the positioning system between the robot and different medical equipment, a fully automatic diagnosis process can be achieved so that the patient’s suffering of getting in and out of the bed and the doctor’s radiation dose can be obviated.

The GPR-based method proposed in this paper offers a novel method for enhancing the positioning accuracy of the industrial AGV while the transportation robot proposed in this paper also offers a solution for modern imaging fusion diagnosis, which are basically predicated on the conjoint analysis between different kinds of medical devices.

A distinctive feature of tilt-rotor UAVs is that they can be fully actuated, whereas in fixed-angle rotor UAVs (e.g. common-type quadrotors, octorotors, etc.), the associated dynamic model is characterized by underactuation. Because of the existence of more control inputs, in tilt-rotor UAVs, there is more flexibility in the solution of the associated nonlinear control problem. On the other side, the dynamic model of the tilt-rotor UAVs remains nonlinear and multivariable and this imposes difficulty in the drone's controller design. This paper aims to achieve simultaneously precise tracking of trajectories and minimization of energy dissipation by the UAV's rotors. To this end elaborated control methods have to be developed.

A solution of the nonlinear control problem of tilt-rotor UAVs is attempted using a novel nonlinear optimal control method. This method is characterized by computational simplicity, clear implementation stages and proven global stability properties. At the first stage, approximate linearization is performed on the dynamic model of the tilt-rotor UAV with the use of first-order Taylor series expansion and through the computation of the system's Jacobian matrices. This linearization process is carried out at each sampling instance, around a temporary operating point which is defined by the present value of the tilt-rotor UAV's state vector and by the last sampled value of the control inputs vector. At the second stage, an H-infinity stabilizing controller is designed for the approximately linearized model of the tilt-rotor UAV. To find the feedback gains of the controller, an algebraic Riccati equation is repetitively solved, at each time-step of the control method. Lyapunov stability analysis is used to prove the global stability properties of the control scheme. Moreover, the H-infinity Kalman filter is used as a robust observer so as to enable state estimation-based control. The paper's nonlinear optimal control approach achieves fast and accurate tracking of reference setpoints under moderate variations of the control inputs. Finally, the nonlinear optimal control approach for UAVs with tilting rotors is compared against flatness-based control in successive loops, with the latter method to be also exhibiting satisfactory performance.

So far, nonlinear model predictive control (NMPC) methods have been of questionable performance in treating the nonlinear optimal control problem for tilt-rotor UAVs because NMPC's convergence to optimum depends often on the empirical selection of parameters while also lacking a global stability proof. In the present paper, a novel nonlinear optimal control method is proposed for solving the nonlinear optimal control problem of tilt rotor UAVs. Firstly, by following the assumption of small tilting angles, the state-space model of the UAV is formulated and conditions of differential flatness are given about it. Next, to implement the nonlinear optimal control method, the dynamic model of the tilt-rotor UAV undergoes approximate linearization at each sampling instance around a temporary operating point which is defined by the present value of the system's state vector and by the last sampled value of the control inputs vector. The linearization process is based on first-order Taylor series expansion and on the computation of the associated Jacobian matrices. The modelling error, which is due to the truncation of higher-order terms from the Taylor series, is considered to be a perturbation that is asymptotically compensated by the robustness of the control scheme. For the linearized model of the UAV, an H-infinity stabilizing feedback controller is designed. To select the feedback gains of the H-infinity controller, an algebraic Riccati equation has to be repetitively solved at each time-step of the control method. The stability properties of the control scheme are analysed with the Lyapunov method.

There are no research limitations in the nonlinear optimal control method for tilt-rotor UAVs. The proposed nonlinear optimal control method achieves fast and accurate tracking of setpoints by all state variables of the tilt-rotor UAV under moderate variations of the control inputs. Compared to past approaches for treating the nonlinear optimal (H-infinity) control problem, the paper's approach is applicable also to dynamical systems which have a non-constant control inputs gain matrix. Furthermore, it uses a new Riccati equation to compute the controller's gains and follows a novel Lyapunov analysis to prove global stability for the control loop.

There are no practical implications in the application of the nonlinear optimal control method for tilt-rotor UAVs. On the contrary, the nonlinear optimal control method is applicable to a wider class of dynamical systems than approaches based on the solution of state-dependent Riccati equations (SDRE). The SDRE approaches can be applied only to dynamical systems which can be transformed to the linear parameter varying (LPV) form. Besides, the nonlinear optimal control method performs better than nonlinear optimal control schemes which use approximation of the solution of the Hamilton–Jacobi–Bellman equation by Galerkin series expansions. The stability properties of the Galerkin series expansion-based optimal control approaches are still unproven.

The proposed nonlinear optimal control method is suitable for using in various types of robots, including robotic manipulators and autonomous vehicles. By treating nonlinear control problems for complicated robotic systems, the proposed nonlinear optimal control method can have a positive impact towards economic development. So far the method has been used successfully in (1) industrial robotics: robotic manipulators and networked robotic systems. One can note applications to fully actuated robotic manipulators, redundant manipulators, underactuated manipulators, cranes and load handling systems, time-delayed robotic systems, closed kinematic chain manipulators, flexible-link manipulators and micromanipulators and (2) transportation systems: autonomous vehicles and mobile robots. Besides, one can note applications to two-wheel and unicycle-type vehicles, four-wheel drive vehicles, four-wheel steering vehicles, articulated vehicles, truck and trailer systems, unmanned aerial vehicles, unmanned surface vessels, autonomous underwater vessels and underactuated vessels.

The proposed nonlinear optimal control method is a novel and genuine result and is used for the first time in the dynamic model of tilt-rotor UAVs. The nonlinear optimal control approach exhibits advantages against other control schemes one could have considered for the tilt-rotor UAV dynamics. For instance, (1) compared to the global linearization-based control schemes (such as Lie algebra-based control or flatness-based control), it does not require complicated changes of state variables (diffeomorphisms) and transformation of the system's state-space description. Consequently, it also avoids inverse transformations which may come against singularity problems, (2) compared to NMPC, the proposed nonlinear optimal control method is of proven global stability and the convergence of its iterative search for an optimum does not depend on initialization and controller's parametrization, (3) compared to sliding-mode control and backstepping control the application of the nonlinear optimal control method is not constrained into dynamical systems of a specific state-space form. It is known that unless the controlled system is found in the input–output linearized form, the definition of the associated sliding surfaces is an empirical procedure. Besides, unless the controlled system is found in the backstepping integral (triangular) form, the application of backstepping control is not possible, (4) compared to PID control, the nonlinear optimal control method is of proven global stability and its performance is not dependent on heuristics-based selection of parameters of the controller and (5) compared to multiple-model-based optimal control, the nonlinear optimal control method requires the computation of only one linearization point and the solution of only one Riccati equation.

Wheel‐terrain interaction has hardly been taken into consideration in the process of conventional mobile robot design, but its importance has been reflected increasingly towards these categories of mobile robots in rough sandy terrain or obstacle‐dense ground, as the first performance index in this situation is the trafficability of robot whose propulsion is uniquely generated by wheel‐terrain interaction. Consequently, it is valuable to find an optimized design method when the terrain and robot itself are regarded simultaneously. The purpose of this paper is to present a novel and reasonable design approach to mobile robot in sandy terrain.

Leading to some conflicted performance indices of robot, terramechanics describes the non‐linear characteristics in wheel‐terrain interaction mathematically, therefore, trade‐offs must be implemented to get a proper solution by multi‐objective optimization (MOO). In this paper, a five‐wheeled drive and five‐wheeled steering (5WD5WS) reconfigurable mobile robot is taken as demonstration with taxonomy of total‐symmetrical, partial‐symmetrical and asymmetrical prototypes. After function modeling, the MOO is carried out via iSIGHT‐FD using NCGA (Neighborhood Cultivation Genetic Algorithm) to minimize the mass, wheel resistance and maximize the static stability simultaneously.

After MOO, a compact and light weighted asymmetrical prototype is obtained with better trafficability, and other prototypes can produce diversified configurations to meet specific requirements. Significantly reduced masses (about 17 kg) enhance the grade‐ability when robot is in rough terrain. Performed real‐world experiments have also verified these prototypes.

The paper presents a new design approach for a mobile robot which focuses on both robot and terrain simultaneously with respect to conflicted factors. To unveil the insight relation of these factors, MOO is an effective tool to get a trade‐offs prototype.

The purpose of this paper is to present a design of climbing robot with magnetic wheels which can move on the surface of steel bridge. The locomotion concept is based on adapted lightweight magnetic wheel units with relatively high attractive force and friction force.

The robot has the main advantages of being compact (352 × – 215 × – 155 mm), lightweight (2.3 kg without battery) and simple mechanical structure. It is not only able to climb vertical walls and follow circumferential paths, but also able to pass complex obstacles such as bolts, steps, convex and concave corners with almost any inclination regarding gravity. By using a servo as a compliant joint, the wheel base can be changed to enable the robot to overcome convex corners.

The experiment results show that the climbing robot has a good performance on locomotion, and it is successful in negotiating the complex obstacles. On the other hand, the limitations in locomotion of the robot are also presented.

Compared with the past researches, the robot shows good performance on overcoming complex obstacles such as concave corners, convex corners, bolts and steps on the steel bridge. Magnetic wheel with the characterization of compact size and lightweight is able to provide bigger adhesion force and friction coefficient.