Search results

The purpose of this paper is to know airflow field and its distribution of pneumatic compact spinning systems. Complete compact spinning (CCS) and four-line rollers compact spinning (FRCS) are both two kinds of pneumatic compact spinning systems, which utilizes airflow in condensing equipment to condense fiber bundle and improve yarn properties.

The paper opted for an exploratory study using finite element method, the airflow field in the condensing area of CCS and FRCS were simulated. First, a periodic movement of the fibers in bundle in condensing area was detected, and the yarn tracks were described veritably under the high-speed-video-camera and AutoCAD Software. Then the physical models of the condensing zone were constructed according to the physical parameters of the practical system. The simulation of airflow velocities were extracted along the yarn tracks using ANSYS Software. Finally, the numerical results were verified by spinning experiments.

The results show that the negative velocity component along the Y-axis helps keeping beneficial hairiness. CCS has higher negative velocity value and more abundant beneficial hairiness than FRCS. The velocity component in the X-axis direction has a direct effect on yarn evenness. For the same liner density of CCS and FRCS, the larger the value of the velocity component on X-axis is, the better the yarn evenness is. For 9.7tex, CCS has larger velocity component in the X-axis direction and better yarn evenness than FRCS, showing that CCS is more suitable for spinning fine count yarn. The velocity component in the Z-axis direction has a direct effect on breaking strength. CCS has little velocity component in the Z-axis direction and little breaking strength than FRCS.

To know airflow field and its distribution by finite element method is helpful to investigate the condensing principles of the fiber bundle and improve yarn properties.

Due to the excellent functionality of graphene, the research on fiber modification by graphene has been receiving more and more attentions recently, and many research findings have been conducted. However, the purpose of this paper is to focus on the fiber modification method and corresponding modified fiber properties, but the research on processing of the modified fiber, especially the textile process, is little. Therefore, in the paper, the properties of one kind of textile GN fiber and the spinning method of the GN fiber blend yarn and the functionalities of corresponding fabric are studied.

In the paper, the properties of nylon fiber modified by graphene (GN) were studied first. Then, according to the tested results, one new blending process of the GN fiber and cotton fiber was given, and corresponding properties of the blend yarns were tested and analyzed. Finally, the knitted fabrics were produced using the spun blend yarns, and the antibacterial property, electromagnetic shielding property, anti-ultraviolet performance, anti-static performance and conventional mechanical, and appearance thermal-wet comfort properties were tested and comparatively analyzed.

The tested results showed that the functionality of all fabrics was effective due to the addition of the graphene in the fiber, especially the antibacterial property. With the increasing of the GN fiber in the blend yarns, the functionality of all fabrics was also increased first and then achieved stability.

One new blending process of the GN fiber and cotton fiber was given. In the spinning, the combed cotton sliver was produced first, and then was torn into small parts of combed cotton sliver fiber by hand. Then, the treated GN fibers and cotton fibers were mixed for the first time, and corresponding GN/C carding sliver was produced. In this blend processing, the mixed cotton fiber was used to improve the sliver processing of the GN fiber. Then, in the drawing process, the required number of GN/C carding sliver and combed cotton sliver were fed simultaneously, and GN fibers and cotton fibers were mixed for the second time, and corresponding four kinds of GN/JC blend yarns were produced. In this blend processing, the mixed cotton fiber was used to regulate the blending ratio.

As a natural fiber, yakwool has attracted much attention in textile processing due to its excellent properties and wearabilities. However, the main colors of yakwool are black and brown. Therefore, for extending the application scopes of the fiber, the decolorization of the yakwool fiber is usually needed, especially for the black fiber. The paper aims to discuss this issue.

In the paper, the properties of the yakwool fiber were tested first, especially the melanin granules in the fiber. Then, the decolorization of the yakwool fiber was studied using the oxidation–reduction decolorization method, and corresponding optimal process of the decolorization was given. Then, the properties of the decolorized yakwool fiber were tested and compared with those of the original fiber.

It is shown that, after decolorization, the physical and mechanical properties of the fiber were deteriorated, especially in terms of the strength and elongation. Therefore, the fiber became shorter and thinner, and the scales were damaged. When compared with the yarn spun from the original yakwool fiber, it was observed that the properties of the yarn spun from the decolorized yakwool fiber deteriorated because of the deterioration in the properties of the original fiber.

In the paper, for extending the application scopes of the yakwool fiber, the decolorization of the yakwool fiber was studied.

Spun silk is one of the top grade textile materials, and its products have high added value and meet the needs of the market. However, the technology level and process design of silk spinning are still much lower than cotton spinning; especially singeing is applied on spun silk yarn, and generates waste materials. The purpose of this paper is to introduce a kind of pneumatic compact spinning, four-line compact spinning (FLCS), into silk spinning and study the corresponding spun yarn qualities.

First, taking the silk spinning frame FK501 as an example, the process of modification of FLCS is presented. Then, three kinds of spun silk yarns, 80 Nm (12.5tex), 100 Nm (10tex) and 120 Nm (8.3tex), are spun on the common silk spinning frame FK501 and the spinning frame modified with FLCS. The evenness, breaking strength and hairiness of spun yarns are tested and comparatively analyzed. After the ply yarn production, three singeing procedures should be applied on the ring ply yarns, while only two singeing procedures should be applied on the compact ply yarns, which is beneficial for material saving.

The results show that compared with ring spun silk yarns, the comprehensive quality of compact spun silk yarns is improved, especially the harmful long hairiness (=3 mm) of yarn. Compared with the single spun silk yarn, the comprehensive qualities of the ply yarn are improved; especially, the breaking strength of the ply yarns is two times larger than the single yarn. After singeing, the hairiness of the ply yarn is decreased greatly, and the evenness is also improved, while the strength is decreased. Compared with ring spun silk yarn, the singeing times of compact spun silk yarn can be decreased, and the gas consumption in each singeing is also decreased, which is beneficial for material saving.

In this paper, a kind of pneumatic compact spinning, FLCS, is introduced into the silk spinning. It is shown that compared with ring spun silk yarns, the comprehensive quality of compact spun silk yarns is improved, especially the harmful long hairiness (=3 mm) of yarn. After the ply yarn production, three singeing procedures should be applied on the ring ply yarns, while only two singeing procedures should be applied on the compact ply yarns, which is beneficial for material saving.

Pneumatic compact spinning is the most widely used compact spinning method at present, in which the negative pressure airflow is used to condense the fiber bundle and decrease the spinning triangle. Compact spinning with perforated drum and lattice apron are mainly two kinds of pneumatic compact spinning now. The purpose of this paper is to study the comparative analysis on four kinds of pneumatic compact spinning systems, including two kinds of compact spinning with perforated drum: Rieter’s COM4 and complete condensing spinning (CCS), two kinds of compact spinning with lattice apron: Sussen’s three-line compact spinning (TLCS) and Toyota’s four-line compact spinning (FLCS).

First, the basic properties of four systems were introduced and comparatively analyzed. Then, the 29.2 tex (20S), 14.6 tex (40S), 9.7 tex (60S) and 7.3 tex (80S) combed cotton yarns were spun in the four pneumatic compact spinning systems and ring spinning system, respectively. The evenness, breaking strength and hairiness of spun yarns were tested. Finally, the properties of corresponding woven fabric were tested.

It is shown that comparing to compact spinning with lattice apron, the disposable input cost of compact spinning with perforated drum is higher, but the maintenance cost is lower. Comparing to compact spinning with lattice apron, the evenness of yarn spun by compact spinning with perforated drum is improved whereas the breaking strength is decreased. Furthermore, although harmful long hairiness (=3 mm) of yarn spun by CCS is a little more, the beneficial short hairiness (1-2 mm) is also more, which can make the fabric fullness and have better comfortable feeling.

In the paper, comparative analysis on four kinds of pneumatic compact spinning systems, compact spinning with perforated drum: Rieter’s COM4 and CCS, and compact spinning with lattice apron: Sussen’s TLCS and Toyota’s FLCS, were studied. The basic properties, spun yarn qualities and properties of corresponding woven fabric of four systems were analyzed comparatively.

As one natural fiber, spun silk is one of the top-grade textile materials and has attracted more and more attentions on textile processing. The purpose of this paper is to introduce one kind of pneumatic compact spinning, four-line compact spinning (FLCS), into the silk spinning, and study and comparatively analyze corresponding yarn and fabric qualities.

First, two kinds of spun silk and viscose blend yarns, 120 Nm (8.3 tex) and 205 Nm (4.9 tex), were spun on the common ring spinning frame FK501 and spinning frame modified by FLCS, respectively. Then, after the plying and singeing procedures, the ply yarns 120 and 205 Nm/2 were produced. The evenness, breaking strength, and hairiness of the spun bobbin yarns and ply yarns were tested and comparatively analyzed. Then, properties of corresponding woven fabric, including the weight, thickness, permeability, stiffness, softness, smoothness, draping, wrinkle recovery, hand-touching (RHV), were measured and comparatively analyzed.

For the spun yarns, it is shown that by using the compact spinning method, the comprehensive quality of spun-silk blend bobbin and ply yarns are improved. For the fabrics, it is shown that compared with the fabric made of ring yarn, the weight and thickness of fabric made of compact yarn decreased, and the air permeability of fabric increased, but the difference is tiny. Meanwhile, the stiffness, smoothness of fabric made of compact yarn increased slightly, but the softness decreased slightly, leading to a little worse fabric hand-touching.

In the paper, one kind of pneumatic compact spinning, FLCS, was introduced into the silk spinning, and corresponding yarn and fabric qualities were studied and comparatively analyzed.

Pneumatic compact spinning is the most widely used compact spinning method at present, in which the negative pressure airflow is used to condense the fiber in order to decrease the spinning triangle and improve the yarn qualities. Therefore, the research on flow field in the condensing zone is always the emphasis for pneumatic compact spinning. The paper aims to discuss these issues.

By using finite element method (FEM), the flow field in two kinds of pneumatic compact spinning was studied. Taking three kinds of cotton yarns as examples, with the help of high-speed camera system OLYMPUS i-SPEED3, the motion trajectory of fiber strand in the condensing zone was obtained. Three-dimensional physical models of the condensing zone of the two compact spinning systems were obtained according to the measured parameters of practical spinning systems.

It is shown that on the both left edge of B1 line and right edge of B2 line, the airflow inflows to the center line of suction slot, and the condensed effects are produced, correspondingly. In the condensing zone, there are three condensing processes acting on the fiber strand, including the rapid condensing effects in the front condensing zone, the adequately condensing effects in the middle condensing zone, and stable output effects in the back condensing zone.

By using FEM, numerical simulations of three-dimensional flow field in condensing zone for two kinds of pneumatic compact spinning with lattice apron were presented, and corresponding spun yarn qualities were analyzed.

The purpose of this study is to investigate the effects of air-suction slots geometry on the condensing zone of pneumatic compact spinning.

This paper investigated the condensing zone of pneumatic compact spinning with perforated drum for different structures of air-inlet slot geometry with computational fluid dynamics. For this purpose, three air-suction guides with different air-slots were designed. To create the condensing zone for the numerical simulation, a suction insert and the perforated drum were also designed. Flow velocity components on the X, Y, and Z axes, static pressure distribution and the streamline diagram were used for comparative analysis. Designed air-suction guides were produced with a 3D printer and used for yarn production.

Numerical simulation results showed that condensing effects were provided for all three types of air-suction guides and approaching air-slots on the suction guides resulted in greater flow components but may cause fluctuations. Experimental results also showed that actual flow velocity components (Z-axis) are effective on hairiness (H) properties of the yarn while assisting flow-velocity components are more effective on the evenness and tenacity properties of the yarn.

This paper presents the numerical flow field simulation of compact spinning for different structures of air-suction guides with detailed measurements. To know the effects of air-suction guides on the condensing zone may be helpful to improve yarn properties. In addition, a 3D printer was used for the production of designed parts.

The paper aims to provide an investigation about the effect of some selected production parameters such as core yarn type, sheath sliver type and total yarn count factors on core spun vortex yarns' evenness, imperfection and tensile properties. Hence it is aimed to contribute to the literature in vortex spinning where there are limited works related to core-spun vortex spinning.

The paper evaluates the effect of core yarn type, sheath sliver type and total yarn count factors on yarn evenness, imperfections, hairiness and tensile properties. Completely randomised three-factor analysis of variance (ANOVA) was conducted in order to evaluate the effect of core yarn type, sheath sliver type and linear yarn density on core spun vortex yarns' evenness, imperfection and tensile properties at significance level of 0.05. SNK tests were also performed for observing the means of each parameter. Correlation analysis was also conducted to reveal some relationships between yarn evenness and yarn tensile properties.

In this paper, significant factors related to some production parameters affecting the core-spun vortex yarns' evenness, imperfection, hairiness and tensile properties were found.

There are limited works related to effect of selected production parameters on yarn evenness, Imperfections and Tensile Properties of Hybrid Vortex Yarns.