Search results
1 – 10 of over 9000Gurmeet Kaur, M.L. Singh and M.S. Patterh
Fiber nonlinearities are anticipated to impose transmission limitations due to the enhanced total interaction length in long‐haul dense wavelength division multiplexing (DWDM…
Abstract
Purpose
Fiber nonlinearities are anticipated to impose transmission limitations due to the enhanced total interaction length in long‐haul dense wavelength division multiplexing (DWDM) optical transmission systems. The purpose of this paper is to analytically study the combined effect of stimulated Raman scattering (SRS) and four‐wave mixing (FWM) in the presence of amplified spontaneous emission (ASE) noise generated by erbium‐doped fiber amplifiers (EDFAs).
Design/methodology/approach
The paper presents analytical analysis of DWDM optical transmission systems in the presence of two significant fiber nonlinearities (SRS and FWM).
Findings
Simple expressions are derived to study the dependence of signal‐to‐noise ratio (SNR) on the amplifier spacing between two consecutive amplifiers.
Originality/value
The authors have analytically studied the combined effect of SRS and FWM in the presence of ASE noise generated by EDFAs. The novelty of the work is that it has considered all the three factors simultaneously and the expressions are derived for calculation of SNR.
Details
Keywords
A major limitation to achieving significant speed increases in VLSI lies in the metallic interconnects. They are costly not only from the charge transport standpoint but also from…
Abstract
A major limitation to achieving significant speed increases in VLSI lies in the metallic interconnects. They are costly not only from the charge transport standpoint but also from capacitive loading effects. The Defense Advanced Research Projects Agency, in pursuit of fifth generation supercomputing, is investigating alternatives to the VLSI metallic interconnects, especially the use of optical techniques to transport the information between chips or between boards. As the on‐chip performance of VLSI continues to improve via the scale‐down of the logic elements, the problems associated with transferring data off and onto the chip become more severe. The use of optical carriers to transfer the information within the computer is very appealing from several viewpoints. Besides the potential for gigabit propagation rates, the conversion from electronics to optics conveniently provides a decoupling of the various circuits from one another. Significant gains will also be realised in reducing cross‐talk between the metallic routings, and the interconnects need no longer be constrained to the plane of the VLSI chip. In addition, optics can offer an increased programming flexibility for restructuring the interconnect network.
Gurmeet Kaur, M.L. Singh and M.S. Patterh
The current generation of light wave systems benefit from increased transmission distance by using optical amplification and increased capacity by using dense wavelength division…
Abstract
Purpose
The current generation of light wave systems benefit from increased transmission distance by using optical amplification and increased capacity by using dense wavelength division multiplexing (DWDM) technology. The reach of present systems is limited by the noise contributed by the used amplifiers, combined with nonlinear effects from transmission. This paper aims to address these issues.
Design/methodology/approach
The nature and extent of degradations in the optical DWDM systems due to these limiting factors have been discussed in this paper.
Findings
It has been learnt that stimulated Raman scattering (SRS), four wave mixing (FWM) and amplified spontaneous emission (ASE) are the important factors in optical DWDM systems. These factors limit the system capacity of the transmission systems drastically.
Originality/value
It can be concluded from the discussion that while designing an efficient DWDM system, an optimization of the channel separation and the amplifier separation is required to minimize the nonlinear effects (FWM and SRS) along with the ASE noise introduced by inline optical amplifications.
Details
Keywords
While working with clients in the last years of his life, Gordon Pask produced an axiomatic scheme for his Interactions of Actors Theory which is a development of his well known…
Abstract
While working with clients in the last years of his life, Gordon Pask produced an axiomatic scheme for his Interactions of Actors Theory which is a development of his well known Conversation Theory. These axioms are interpretable as a general theory of self‐organisation and are discussed as characteristic of field concurrence and as part of the second‐order cybernetics canon. An application to population density is reported supported by both kinematic and kinetic simulation. Implications for cardiovascular anti‐coagulation therapy and planetary evolution are discussed.
Details
Keywords
The purpose of this paper is to introduce new non‐classical implementations of neural networks (NNs). The developed implementations are performed in the quantum, nano, and optical…
Abstract
Purpose
The purpose of this paper is to introduce new non‐classical implementations of neural networks (NNs). The developed implementations are performed in the quantum, nano, and optical domains to perform the required neural computing. The various implementations of the new NNs utilizing the introduced architectures are presented, and their extensions for the utilization in the non‐classical neural‐systolic networks are also introduced.
Design/methodology/approach
The introduced neural circuits utilize recent findings in the quantum, nano, and optical fields to implement the functionality of the basic NN. This includes the techniques of many‐valued quantum computing (MVQC), carbon nanotubes (CNT), and linear optics. The extensions of implementations to non‐classical neural‐systolic networks using the introduced neural‐systolic architectures are also presented.
Findings
Novel NN implementations are introduced in this paper. NN implementation using the general scheme of MVQC is presented. The proposed method uses the many‐valued quantum orthonormal computational basis states to implement such computations. Physical implementation of quantum computing (QC) is performed by controlling the potential to yield specific wavefunction as a result of solving the Schrödinger equation that governs the dynamics in the quantum domain. The CNT‐based implementation of logic NNs is also introduced. New implementations of logic NNs are also introduced that utilize new linear optical circuits which use coherent light beams to perform the functionality of the basic logic multiplexer by utilizing the properties of frequency, polarization, and incident angle. The implementations of non‐classical neural‐systolic networks using the introduced quantum, nano, and optical neural architectures are also presented.
Originality/value
The introduced NN implementations form new important directions in the NN realizations using the newly emerging technologies. Since the new quantum and optical implementations have the advantages of very high‐speed and low‐power consumption, and the nano implementation exists in very compact space where CNT‐based field effect transistor switches reliably using much less power than a silicon‐based device, the introduced implementations for non‐classical neural computation are new and interesting for the design in future technologies that require the optimal design specifications of super‐high speed, minimum power consumption, and minimum size, such as in low‐power control of autonomous robots, adiabatic low‐power very‐large‐scale integration circuit design for signal processing applications, QC, and nanotechnology.
Details
Keywords
Zongwen Fu, Matthias Freihart, Tobias Schlordt, Tobias Fey, Torsten Kraft, Peter Greil and Nahum Travitzky
This study aims to achieve the fabrication of three-dimensional core-shell filament-based lattice structures by means of robocasting combined with co-extrusion. For core and shell…
Abstract
Purpose
This study aims to achieve the fabrication of three-dimensional core-shell filament-based lattice structures by means of robocasting combined with co-extrusion. For core and shell materials, colloidal gels composed of submicron carbon and alumina powders were developed, respectively. Simultaneously, the co-extrusion process was also studied by numerical simulation to investigate the feed pressure-dependent wall thickness.
Design/methodology/approach
Significant differences in the rheological behavior of the carbon and alumina gels were observed because of differences of the particle morphology and surface chemistry of the carbon and alumina powders. Precise control over the cross-sectional diameter of the core and shell green state elements was achieved by alteration of the feed pressures used during co-extrusion.
Findings
After subsequent thermal treatment in an oxidizing atmosphere (e.g. air), in which the carbon core was oxidized and burned out, lattice structures formed of hollow filaments of predetermined wall thickness were manufactured; additionally, C-Al2O3 core-shell filament lattice structures could be derived after firing in an argon atmosphere.
Originality/value
Green lattice truss structures with carbon core and alumina shell filaments were successfully manufactured by robotically controlled co-extrusion. As feedstocks carbon and alumina gels with significantly different rheological properties were prepared. During co-extrusion, the core paste exhibited a much higher viscosity than the shell paste, which benefited the co-extrusion process. Simultaneously, the core and shell diameters were exactly controlled by core and shell feed pressures and studied by numerical simulation. The experimentally and numerically derived filament wall thickness showed qualitative agreement with each other; with decreasing core pressure during co-extrusion, the wall thickness increased.
Details
Keywords
Malathy Batumalay, F. Ahmad, Asiah Lokman, A.A. Jasim, Sulaiman Wadi Harun and H. Ahmad
A simple tapered plastic optical fiber (POF) sensor is proposed and demonstrated for measurement of uric acid concentrations in de-ionized water. The paper aims to discuss these…
Abstract
Purpose
A simple tapered plastic optical fiber (POF) sensor is proposed and demonstrated for measurement of uric acid concentrations in de-ionized water. The paper aims to discuss these issues.
Design/methodology/approach
The sensor operates based on intensity modulation technique as the tapered POF probe which was coated by a single walled carbon nonotubes polyethylene oxide (SWCNT-PEO) composite is immersed into the uric acid solution. The probe was fabricated using an etching method and has a waist diameter of 0.46 mm and tapering length of 10 mm.
Findings
As the concentration varies from 0 to 500 ppm, the output voltage of the sensor increases linearly from 6.13 to 7.35 mV with a sensitivity of 0.0023 mV/% and a linearity of more than 97.20 percent. The SWCNT-PEO composite coating increases the sensitivity of the proposed sensor due to the effective cladding refractive index, which increases with the coating and thus allows more light to be transmitted from the tapered fiber.
Originality/value
This is the first demonstration of the tapered POF sensor for measurement of uric acid concentrations in de-ionized water.
Details
Keywords
Arun G. Nair, Tide P.S. and Bhasi A.B.
The mixing of fuel and air plays a pivotal role in enhancing combustion in supersonic regime. Proper mixing stabilizes the flame and prevents blow-off. Blow-off is due to the…
Abstract
Purpose
The mixing of fuel and air plays a pivotal role in enhancing combustion in supersonic regime. Proper mixing stabilizes the flame and prevents blow-off. Blow-off is due to the shorter residence time of fuel and air in the combustor, as the flow is in supersonic regime. The flame is initiated in the local subsonic region created using a flameholder within the supersonic combustor. This study aims to design an effective flameholder which increases the residence time of fuel in the combustor allowing proper combustion preventing blow-off and other instabilities.
Design/methodology/approach
The geometry of the strut-based flameholder is altered in the present study to induce a streamwise motion of the fluid downstream of the strut. The streamwise motion of the fluid is initiated by the ramps and grooves of the strut geometry. The numerical simulations were carried out using ANSYS Fluent and are validated against the available experimental and numerical results of cold flow with hydrogen injection using plain strut as the flameholder. In the present study, numerical investigations are performed to analyse the effect on hydrogen injection in strut-based flameholders with ramps and converging grooves using Reynolds-averaged Navier–Stokes equation coupled with Menter’s shear stress transport k-ω turbulence model. The analysis is done to determine the effect of geometrical parameters and flow parameter on the flow structures near the base of the strut where thorough mixing takes place. The geometrical parameters under consideration include the ramp length, groove convergence angle, depth of the groove, groove compression angle and the Mach number. Two different strut configurations, namely, symmetric and asymmetric struts were also studied.
Findings
Higher turbulence and complex flow structures are visible in asymmetric strut configuration which develops better mixing of hydrogen and air compared to symmetric strut configuration. The variation in the geometric parameters develop changes in the fluid motion downstream of the strut. The fluid passing through the converging grooves gets decelerated thereby reducing the Mach number by 20% near the base of the strut compared to the straight grooved strut. The shorter ramps are found to be more effective, as the pressure variation in lateral direction is carried along the strut walls downstream of the strut increasing the streamwise motion of the fluid. The decrease in the depth of the groove increases the recirculation zone downstream of the strut. Moreover, the increase in the groove compression angle also increases the turbulence near the base of the strut where the fuel is injected. Variation in the injection port location increases the mixing performance of the combustor by 25%. The turbulence of the fuel jet stream is considerably changed by the increase in the injection velocity. However, the change in the flow field properties within the flow domain is marginal. The increase in fuel mass flow rate brings about considerable change in the flow field inducing stronger shock structures.
Originality/value
The present study identifies the optimum geometry of the strut-based flameholder with ramps and converging grooves. The reaction flow modelling may be performed on the strut geometry incorporating the design features obtained in the present study.
Details