Search results

1 – 10 of 27
Article
Publication date: 9 November 2023

Gustavo Candela, Nele Gabriëls, Sally Chambers, Milena Dobreva, Sarah Ames, Meghan Ferriter, Neil Fitzgerald, Victor Harbo, Katrine Hofmann, Olga Holownia, Alba Irollo, Mahendra Mahey, Eileen Manchester, Thuy-An Pham, Abigail Potter and Ellen Van Keer

The purpose of this study is to offer a checklist that can be used for both creating and evaluating digital collections, which are also sometimes referred to as data sets as part…

Abstract

Purpose

The purpose of this study is to offer a checklist that can be used for both creating and evaluating digital collections, which are also sometimes referred to as data sets as part of the collections as data movement, suitable for computational use.

Design/methodology/approach

The checklist was built by synthesising and analysing the results of relevant research literature, articles and studies and the issues and needs obtained in an observational study. The checklist was tested and applied both as a tool for assessing a selection of digital collections made available by galleries, libraries, archives and museums (GLAM) institutions as proof of concept and as a supporting tool for creating collections as data.

Findings

Over the past few years, there has been a growing interest in making available digital collections published by GLAM organisations for computational use. Based on previous work, the authors defined a methodology to build a checklist for the publication of Collections as data. The authors’ evaluation showed several examples of applications that can be useful to encourage other institutions to publish their digital collections for computational use.

Originality/value

While some work on making available digital collections suitable for computational use exists, giving particular attention to data quality, planning and experimentation, to the best of the authors’ knowledge, none of the work to date provides an easy-to-follow and robust checklist to publish collection data sets in GLAM institutions. This checklist intends to encourage small- and medium-sized institutions to adopt the collection as data principles in daily workflows following best practices and guidelines.

Details

Global Knowledge, Memory and Communication, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2514-9342

Keywords

Article
Publication date: 30 October 2023

Oluseyi Julius Adebowale and Justus Ngala Agumba

The United Nations has demonstrated a commitment to preserving the ecosystem through its 2030 sustainable development goals agenda. One crucial objective of these goals is to…

Abstract

Purpose

The United Nations has demonstrated a commitment to preserving the ecosystem through its 2030 sustainable development goals agenda. One crucial objective of these goals is to promote a healthy ecosystem and discourage practices that harm it. Building materials production significantly contributes to the emissions of greenhouse gases. This poses a threat to the ecosystem and prompts a growing demand for sustainable building materials (SBMs). The purpose of this study is to investigate SBMs to determine their utilization in construction operations and the potential impact their application could have on construction productivity.

Design/methodology/approach

A systematic review of the existing literature in the field of SBMs was conducted for the study. The search strings used were “sustainable” AND (“building” OR “construction”) AND “materials” AND “productivity”. A total of 146 articles were obtained from the Scopus database and reviewed.

Findings

Bio-based, cementitious and phase change materials were the main categories of SBMs. Materials in these categories have the potential to substantially contribute to sustainability in the construction sector. However, challenges such as availability, cost, expertise, awareness, social acceptance and resistance to innovation must be addressed to promote the increased utilization of SBMs and enhance construction productivity.

Originality/value

Many studies have explored SBMs, but there is a dearth of studies that address productivity in the context of SBMs, which leaves a gap in understanding. This study addresses this gap by drawing on existing studies to determine the potential implications that using SBMs could have on construction productivity.

Details

Journal of Engineering, Design and Technology , vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1726-0531

Keywords

Open Access
Article
Publication date: 6 November 2023

Helene Ahl, Karin Berglund, Katarina Pettersson and Malin Tillmar

Policy for women's entrepreneurship is designed to promote economic growth, not least in depleted rural areas, but very little is known about the contributions of rural women…

Abstract

Purpose

Policy for women's entrepreneurship is designed to promote economic growth, not least in depleted rural areas, but very little is known about the contributions of rural women entrepreneurs, their needs or how the existing policy is received by them. Using a theoretical framework developed by Korsgaard et al. (2015), the authors analyse how rural women entrepreneurs contribute to rural development and discuss the implications for entrepreneurship policy. This paper aims to focus on the aforementioned objectives.

Design/methodology/approach

The authors interviewed 32 women entrepreneurs in rural Sweden representing the variety of businesses in which rural Swedish women are engaged. The authors analysed their contributions to rural development by analysing their motives, strategies and outcomes using Korsgaard et al.’s framework of “entrepreneurship in the rural” and “rural entrepreneurship” as a heuristic, interpretative device.

Findings

Irrespective of industry, the respondents were deeply embedded in family and local social structures. Their contributions were substantial, multidimensional and indispensable for rural viability, but the policy tended to bypass most women-owned businesses. Support in terms of business training, counselling and financing are important, but programmes especially for women tend to miss the mark, and so does rural development policy. More important for rural women entrepreneurs in Sweden is the provision of good public services, including for example, schools and social care, that make rural life possible.

Research limitations/implications

Theoretically, the findings question the individualist and a-contextual focus of much entrepreneurship research, as well as the taken-for-granted work–family divide. How gender and how the public and the private are configured varies greatly between contexts and needs contextual assessment. Moreover, the results call for theorising place as an entrepreneurial actor.

Practical implications

Based on the findings, the authors advise future policymakers to gender mainstream entrepreneurship policy and to integrate entrepreneurship and rural development policy with family and welfare state policy.

Originality/value

The paper highlights how rural women respond to policy, and the results are contextualised, making it possible to compare them to other contexts. The authors widen the discussion on contributions beyond economic growth, and the authors show that policy for public and commercial services and infrastructure is indeed also policy for entrepreneurship.

Details

International Journal of Entrepreneurial Behavior & Research, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1355-2554

Keywords

Article
Publication date: 4 March 2024

Betul Gokkaya, Erisa Karafili, Leonardo Aniello and Basel Halak

The purpose of this study is to increase awareness of current supply chain (SC) security-related issues by providing an extensive analysis of existing SC security solutions and…

Abstract

Purpose

The purpose of this study is to increase awareness of current supply chain (SC) security-related issues by providing an extensive analysis of existing SC security solutions and their limitations. The security of SCs has received increasing attention from researchers, due to the emerging risks associated with their distributed nature. The increase in risk in SCs comes from threats that are inherently similar regardless of the type of SC, thus, requiring similar defence mechanisms. Being able to identify the types of threats will help developers to build effective defences.

Design/methodology/approach

In this work, we provide an analysis of the threats, possible attacks and traceability solutions for SCs, and highlight outstanding problems. Through a comprehensive literature review (2015–2021), we analysed various SC security solutions, focussing on tracking solutions. In particular, we focus on three types of SCs: digital, food and pharmaceutical that are considered prime targets for cyberattacks. We introduce a systematic categorization of threats and discuss emerging solutions for prevention and mitigation.

Findings

Our study shows that the current traceability solutions for SC systems do not offer a broadened security analysis and fail to provide extensive protection against cyberattacks. Furthermore, global SCs face common challenges, as there are still unresolved issues, especially those related to the increasing SC complexity and interconnectivity, where cyberattacks are spread across suppliers.

Originality/value

This is the first time that a systematic categorization of general threats for SC is made based on an existing threat model for hardware SC.

Details

Benchmarking: An International Journal, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1463-5771

Keywords

Article
Publication date: 25 March 2024

Robert Ford and Lindsay Schakenbach Regele

This historical example of the creation of the arms industry in the Connecticut River Valley in the 1800s provides new insights into the value of government venture capital (GVC…

Abstract

Purpose

This historical example of the creation of the arms industry in the Connecticut River Valley in the 1800s provides new insights into the value of government venture capital (GVC) and government demand in creating a new industry. Since current theoretical explanations of the best uses of governmental venture capital are still under development, there is considerable need for further theory development to explain and predict the creation of an industry and especially those industries where failures in private capital supply necessitates governmental involvement in new firm creation. The purpose of this paper is to provide an in depth historical review of how the arms industry evolved spurred by GVC and government created demand.

Design/methodology/approach

This study uses abductive inference as the best way to build and test emerging theories and advancing theoretical explanations of the best uses of GVC and governmental demand to achieve socially required outcomes.

Findings

By observing this specific historical example in detail, the authors add to the understanding of value creation caused by governmental venture capital funding of existing theory. A major contribution of this paper is to advance theory based on detailed observation.

Originality/value

The relatively limited research literature and theory development on governmental venture capital funding and the critical success factors in startups are enriched by this abductive investigation of the creation of the historically important arms industry and its spillover into creating the specialized machine industry.

Details

Journal of Management History, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1751-1348

Keywords

Article
Publication date: 18 March 2024

Syed Mithun Ali, Muhammad Najmul Haque, Md. Rayhan Sarker, Jayakrishna Kandasamy and Ilias Vlachos

Bangladesh's ready-made garment (RMG) industry plays a vital role in the economic growth of this country. As the global trend in the fashion market has introduced a high-mix…

Abstract

Purpose

Bangladesh's ready-made garment (RMG) industry plays a vital role in the economic growth of this country. As the global trend in the fashion market has introduced a high-mix, low-volume ordering style, manufacturers are facing an increased number of changeovers in their production systems. However, most of the Bangladeshi RMG manufacturers are not yet ready to respond to such small orders and to improve the flexibility of their production systems. Consequently, the industry is falling behind in global market competition. Thus, this study aims to advance the current performance of RMG manufacturing operations to respond to the fast-fashion industry's challenges effectively using quick changeover.

Design/methodology/approach

In this study, a Single-Minute Exchange of Dies (SMED) is applied to attain quick changeover following the best practices of lean manufacturing.

Findings

This study examined the performance of the SMED technique to reduce changeover time in two case organisations. The changeover time was reduced by 70.76% from 434.56 min to 127.08 min and 42.12% from 2,664 min to 1,542 min for the case organisations, respectively. The results of this study show that companies require improved changeover times to address the demand for high-mix, low-volume orders.

Originality/value

This study will certainly guide practitioners of the RMG industry to adopt SMED to reduce changeover time to meet small batch production.

Details

Benchmarking: An International Journal, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1463-5771

Keywords

Open Access
Article
Publication date: 29 February 2024

Guanchen Liu, Dongdong Xu, Zifu Shen, Hongjie Xu and Liang Ding

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous…

Abstract

Purpose

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Design/methodology/approach

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

Findings

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

Originality/value

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

Details

Journal of Intelligent Manufacturing and Special Equipment, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2633-6596

Keywords

Article
Publication date: 2 February 2024

Nilesh R. Parmar, Sanjay R. Salla, Hariom P. Khungar and B. Kondraivendhan

This study aims to characterize the behavior of blended concrete, including metakaolin (MK) and quarry dust (QD), as supplementary cementing materials. The study focuses on…

Abstract

Purpose

This study aims to characterize the behavior of blended concrete, including metakaolin (MK) and quarry dust (QD), as supplementary cementing materials. The study focuses on evaluating the effects of these materials on the fresh and hardened properties of concrete.

Design/methodology/approach

MK, a pozzolanic material, and QD, a fine aggregate by-product, are potentially sustainable alternatives for enhancing concrete performance and reducing environmental impact. The addition of different percentages of MK enhances the pozzolanic reaction, resulting in improved strength development. Furthermore, the optimum dosage of MK, mixed with QD, and mechanical properties like compressive, flexural and split tensile strength of concrete were evaluated to investigate the synergetic effect of MK and quarry dust for M20-grade concrete.

Findings

The results reveal the influence of metakaolin and QD on the overall performance of blended concrete. Cost analysis showed that the optimum mix can reduce the 7%–8% overall cost of the materials for M20-grade concrete. Energy analysis showed that the optimum mix can reduce 7%–8% energy consumption.

Originality/value

The effective utilization is determined with the help of the analytical hierarchy process method to find an optimal solution among the selected criteria. According to the AHP analysis, the optimum content of MK and quarry dust is 12% and 16%, respectively, performing best among all other trial mixes.

Details

World Journal of Engineering, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1708-5284

Keywords

Article
Publication date: 25 August 2023

Philip Cooke

The purpose here is to show how the “shadow” economy has grown in scale and impetus in recent years, though even before modern times it has been present (e.g. the City of London…

Abstract

Purpose

The purpose here is to show how the “shadow” economy has grown in scale and impetus in recent years, though even before modern times it has been present (e.g. the City of London, Shaxson, 2011) since at least the middle ages. The reasons for this have become complicated, but we can identify some “deep structures” that are common. Firstly, “globalisation” made it easier for multinationals to escape national regulatory regimes. Secondly, one of the ways neoliberal trading regulations allowed such actors to augment their assets was by means of what they initially called “transfer-pricing” but which now is officially known as “profit shifting” through tax havens. Thirdly, the growth in international trade in legal and illegal ways caused money laundering – even by otherwise respectable banks – to grow across borders. Conversely, from the supply-side, tax haven status was increasingly accessed by jurisdictions that sought to achieve economic growth by supplying tax haven services, both Delaware and Ireland as exemplars of a “developmental” fiscal policy.

Design/methodology/approach

This paper adopts a “pattern recognition” design, an approach that is abductive, meaning interpretive, as shown in the observation that explanation can be valid or reliable without direct observation. This is shown in the indirect observation that “rain fell because the terrace has puddles” or “ancient glaciers once carved this valley”.

Findings

Reviewing the European Union’s (EU) list of non-co-operating jurisdictions in support of the OECD’s review of base erosion and profit-shifting activity, Collin concluded the EU’s listing “moved the needle” somewhat but was only a modest success. This is because of its reluctance to sanction its own members or large economies like the USA. Data on foreign direct investment and offshore banking assets suggest listed jurisdictions did not suffer notably from being named and shamed. In all cases studied, this contribution found legally damaging, fraudulent, conflict of interest and corrupt practice activities everywhere.

Originality/value

The originality is found in three spheres. Firstly, the pattern recognition method was vindicated in yielding hard to research results. Secondly, the “assemblage-thirdspace” theory was found advantageous in demonstrating the uneven geography of tax haven clusters and their common history in turbocharging economic development. Finally, the empirics showed the ruses executed by cluster members in tax havens to circumvent the law from global management consultancies to micro-firms consisting of tax lawyers and other experts interacting in knowledge supply chains of dubious morality.

Details

Competitiveness Review: An International Business Journal , vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 1059-5422

Keywords

Open Access
Article
Publication date: 11 September 2023

Torgrim Sneve Guttormsen, Joar Skrede, Paloma Guzman, Kalliopi Fouseki, Chiara Bonacchi and Ana Pastor Pérez

The paper explores the potential value of urban assemblage theory as a conceptual framework for understanding the role heritage has in social sustainable urban placemaking. The…

Abstract

Purpose

The paper explores the potential value of urban assemblage theory as a conceptual framework for understanding the role heritage has in social sustainable urban placemaking. The authors conceptualise urban placemaking as a dynamic and complex social assemblage. Heritage is one of the many dimensions of such a complex and dynamic urban assembly. Based on the approach to urban assemblage theory, the authors aim to uncover how postindustrial city-making unfolds. When approaching the case studies, the authors ask the following: Whose city for which citizens are visible through the selected case studies? How is social sustainability achieved through heritage in urban placemaking?

Design/methodology/approach

The main research material is derived from theoretical literature and the testing of an assemblage methodological approach through three Norwegian urban regeneration case studies where heritage partake in urban placemaking. The three case studies are the Tukthus wall (what is left of an 19th century old prison), the Vulkan neighbourhood (an 19th century industrial working area) and Sørengkaia (an 19th century industrial harbour area) in Oslo, Norway. The three case studies are representing urban regeneration projects which are common worldwide, and not at least in a European context.

Findings

The paper reveals the dynamic factors and processes at play in urban placemaking, which has its own distinct character by the uses of heritage in each of the case study areas. Placemaking could produce “closed” systems which are stable in accordance with its original functions, or they could be “open” systems affected by the various drivers of change. The paper shows how these forces are depending on two sets of binary forces at play in urban placemaking: forces of “assemblages” co-creating a place versus destabilising forces of “disassembly” which is redefining the place as a process affected by reassembled placemaking.

Research limitations/implications

For research, the authors focus on the implications this paper has for the field of urban heritage studies as it provides a useful framework to capture the dynamic complexity of urban heritage areas.

Practical implications

For practice, the authors state that the paper can provide a useful platform for dialogue and critical thinking on strategies being planned.

Social implications

For society, the paper promotes the significance in terms of fostering an inclusive way of thinking and planning for urban heritage futures.

Originality/value

The paper outlines dynamics of urban regeneration through heritage which are significant for understanding urban transformation as value for offering practical solutions to social problems in urban planning. The assemblage methodological approach (1) makes awareness of the dynamic processes at play in urban placemaking and makes the ground for mapping issue at stake in urban placemaking; (2) becomes a source for modelling urban regeneration through heritage by defining a conceptual framework of dynamic interactions in urban placemaking; and (3) defines a critically reflexive tool for evaluating good versus bad (heritage-led) urban development projects.

Details

Journal of Cultural Heritage Management and Sustainable Development, vol. ahead-of-print no. ahead-of-print
Type: Research Article
ISSN: 2044-1266

Keywords

1 – 10 of 27