Search results

The purpose of this study is to enhance the functional properties of Hessian fabric through resin finishing. Hessian bags made of lignocellulosic jute fiber are commonly used to pack, store and transport agro-commodities, including horticultural crops such as rice, potato, onion and wheat. However, because of high water affinity, these bags undergo degradation in properties due to moisture release by the stored commodities themselves. Exposure to natural elements, e.g. rain and dew, also causes moisture absorption in hessian bags. Once the bag gets moistened, degradation of jute bags starts due to microbial attack, leading to loss in tensile strength and change in extensibility, leading to ultimate breakage in warp and weft directions of the fabric.

To overcome the degradation in the functional properties of hessian fabric due to exposure to moisture and microbial attack, the application of semi-synthetic polymeric materials was carried out.

Tenacity, bursting strength, puncture resistance, tear strength and breaking load, as well as life cycle of resin-treated jute fabric was found to be better than control jute.

To the best of the authors’ knowledge, no recent reports of resin finishing on jute (hessian) fabric with semi-synthetic resins are presently available, other than coating with rubber.

Polyurethane (PUR) foam parts are traditionally manufactured using metallic molds, an unsuitable approach for prototyping purposes. Thus, rapid tooling of disposable molds using fused filament fabrication (FFF) with polylactic acid (PLA) and glycol-modified polyethylene terephthalate (PETG) is proposed as an economical, simpler and faster solution compared to traditional metallic molds or three-dimensional (3D) printing with other difficult-to-print thermoplastics, which are prone to shrinkage and delamination (acrylonitrile butadiene styrene, polypropilene-PP) or high-cost due to both material and printing equipment expenses (PEEK, polyamides or polycarbonate-PC). The purpose of this study has been to evaluate the ease of release of PUR foam on these materials in combination with release agents to facilitate the mulding/demoulding process.

PETG, PLA and hardenable polylactic acid (PLA 3D870) have been evaluated as mold materials in combination with aqueous and solvent-based release agents within a full design of experiments by three consecutive molding/demolding cycles.

PLA 3D870 has shown the best demoldability. A mold expressly designed to manufacture a foam cushion has been printed and the prototyping has been successfully achieved. The demolding of the part has been easier using a solvent-based release agent, meanwhile the quality has been better when using a water-based one.

The combination of PLA 3D870 and FFF, along with solvent-free water-based release agents, presents a compelling low-cost and eco-friendly alternative to traditional metallic molds and other 3D printing thermoplastics. This innovative approach serves as a viable option for rapid tooling in PUR foam molding.

This paper aims to study the influence of microparticles on the surface cavitation behavior of 2Cr3WMoV steel; microparticle suspensions of different concentration, particle size, material and shape were prepared based on ultrasonic vibration cavitation experimental device.

2Cr3WMoV steel was taken as the research object for ultrasonic cavitation experiment. The morphology, quantity and distribution of cavitation pits were observed and analyzed by metallographic microscope and scanning electron microscope.

The study findings showed that the surface cavitation process produced pinhole cavitation pits on the surface of 2Cr3WMoV steel. High temperature in the process led to oxidation and carbon precipitation on the material surface, resulting in the “rainbow ring” cavitation morphology. Both the concentration and size of microparticles affected the number of pits on the material surface. When the concentration of microparticles was 1 g/L, the number of pits reached the maximum, and when the size of microparticles was 20 µm, the number of pits reached the minimum. The microparticles of Fe3O4, Al2O3, SiC and SiO2 all increased the number of pits on the surface of 2Cr3WMoV steel. In addition, the distribution of pits of spherical microparticles was more concentrated than that of irregularly shaped microparticles in turbidity.

Most of the current studies have not systematically focused on the effect of each factor of microparticles on the cavitation behavior when they act separately, and the results of the studies are more scattered and varied. At the same time, it has not been found to carry out the study of microparticle cavitation with 2Cr3WMoV steel as the research material, and there is a lack of relevant cavitation morphology and experimental data.

Sustainability is viewed as an encompassing perspective, as endorsed by the international policy context, driven by the UN’s Sustainable Development Goals (SDGs). We aim to examine how women entrepreneurs transform capitals to pursue sustainability, and to generate policy insights for sustainability actions through tourism entrepreneurship.

Applying qualitative approach, we have generated empirical evidence drawing on 37 qualitative interviews carried out in Turkey, whereby boundaries between traditional patriarchal forces and progressive movements in gender relations are blurred.

We have generated insights into how women entrepreneurs develop their sustainability practice by transforming their available economic, cultural, social and symbolic capitals in interpreting the macro-field and by developing navigation strategies to pursue sustainability. This transformative process demonstrates how gender roles were performed and negotiated in serving for sustainability pillars.

In this paper, we demonstrate the nature and instrumentality of sustainable tourism entrepreneurship through a gender lens in addressing some of these SDG-driven challenges.

We advance the scholarly and policy debates by bringing gender issues to the forefront, discussing sustainable tourism initiatives from the viewpoint of entrepreneurs and various members of local community and stakeholder in a developing country context where women’s solidarity becomes crucial.

This study aims to explore the phenomenon of Islamic religious communication and how Islamic banks in Pakistan use religion-based communication, along with its expected outcomes.

Transcendental phenomenology approach is opted using a multi-stage data collection strategy consisting of observations, documentary reviews and semi-structural interviews to get deep into the phenomenon in a particular context.

Findings highlight Islamic religious communication as workplace Islamic da’wah that is majorly categorized into compulsive da’wah, objectics da’wah and impulsive da’wah, serving its role in bringing spirituality to work through work-faith integration.

The finding of the study can be used in planning, formulating and implementing Islamic da’wah-based model to induce spirituality at work.

This study is the first of its type exploring Islamic da’wah in an organizational context as a mean to bring spirituality at work.

This paper aims to introduce a model using a digital twin concept in a cold heading manufacturing and develop a digital visual management (VM) system using Lean overall equipment effectiveness (OEE) tool to enhance the process performance and establish Fourth Industrial Revolution (I4.0) platform in small and medium enterprises (SMEs).

This work utilised plan, do, check, act Lean methodology to create a digital twin of each machine in a smart manufacturing facility by taking the Lean tool OEE and digitally transforming it in the context of I4.0. To demonstrate the effectiveness of process digitisation, a case study was carried out at a manufacturing department to provide the data to the model and later validate synergy between Lean and I4.0 platform.

The OEE parameter can be increased by 10% using a proposed digital twin model with the introduction of a Level 0 into VM platform to clearly define the purpose of each data point gathered further replicate in projects across the value stream.

The findings suggest that researchers should look beyond conversion of stored data into visualisations and predictive analytics to improve the model connectivity. The development of strong big data analytics capabilities in SMEs can be achieved by shortening the time between data gathering and impact on the model performance.

The novelty of this study is the application of OEE Lean tool in the smart manufacturing sector to allow SME organisations to introduce digitalisation on the back of structured and streamlined principles with well-defined end goals to reach the optimal OEE.

This study aims to explore the ways that social enterprises (SE) create value by embedding themselves in networks through the process of social innovation (SI). The processes of achieving common social missions were studied through selected organizations using an open approach to SI. Novel operational structures as well as unique forms of created value were explored.

Two organizations embedded in local and international networks were studied and were chosen due to their SI profiles. The study was based on qualitative exploratory research. In-depth analysis was conducted through interviews, open discussions, document analysis as well as personal observation to understand the dynamic interrelatedness of the main factors influencing success of SI ventures.

This paper identified the role of SI in SEs embedded in networks. Furthermore, the social value creation processes of these organizations as well as the value they create were explored. Based on the findings, SI is rooted in the personality of the included members of the network. The tools of collaboration are platforms that connect the network members to each other. The embedded organizations apply the concept of community sharing with the aim of social value creation.

By focusing mainly on system design principles, the sample consists of mainly those at the core of organizations in facilitator roles, leaving peripheral actor perceptions to be determined by secondhand observations.

While providing a general summary of factors influencing SI activities from extent literature, the paper mainly contributes by providing deeper insight into complex models of SI practices used by SEs. The paper further contributes to popularizing the growing role of SI activities in SEs.

Michael Buckland's works have spanned theoretical, historical and practice-oriented foci and genre. This article focuses on some of his theoretical-historical works that span over 20 years, which demonstrate a reading and critique of European Documentation in terms of what has been called “Documentality.” This turn to a philosophy of information called “Documentality” marks the moment of “neo-documentation.” This article surveys this moment in Buckland's works by reading his articles “Information as Thing,” “What is a ‘Document’?”, and “Documentality Beyond Documents.” It shows the transition from Documentation as a philosophy of information as representation to Documentality as a philosophy of information as function and performance. Some concepts and works of Bruno Latour are used to illuminate this transition from Documentation to Documentality. Implications and further research directions are discussed at the end.

Conceptual and historical analyses.

The article follows a neo-documentalist transition in Buckland's works in the thinking of documents from an Otletian representationalist epistemology (“Documentation”) to a functionalist and performative epistemology (“Documentality”) for documents.

This is a conceptual work on a limited corpus in Buckland's oeuvre. It has a limited discussion of Documentality in the works of other writers, namely the works of Bernd Frohmann and Maurizio Ferraris.

The article points to historical shifts in the study of documents in Library and Information Science.

Documentality critically and materially studies documents in sociotechnical information management systems and elsewhere.

This work highlights the importance of the above works and the importance of the neo-documentalist perspective of Documentality.

Supply chain management (SCM)-embedded valuable resources, such as capital, raw-materials, products, partners, customers and finished inventories, where the evaluation of environmental texture and flexibilities are needed to perceive sustainability. The present study aims to identify and evaluate the directory of green and agile (G-A) attributes based on decision support framework (DSF) for identifying dominating measures in SCM.

DSF is developed by exploiting generalized interval valued trapezoidal fuzzy numbers (GIVTFNs). Two technical approaches, i.e. degree of similarity approach (DSA) and distance approach (DA) under the extent boundaries of GIVTFNs, are implicated for data analytics and for recognizing constructive G-A measures based on comparative study for robust decision. A fuzzy-based performance indicator, i.e. fuzzy performance important index (FPII), is presented to enumerate the weak and strong G-A characteristics to manage knowledge risks in allied business environment.

The modeling is illustrated from the insights of decision-makers for augmenting business value based on cognitive identification of measures, where the best performance score is identified by the “sustainable packaging” under the traits of green supply chain management (GSCM). “The use of Web-based applications” under the traits of agile supply chain management (ASCM) and “Outsourcing flexibility” under traits of ASCM is found as the second and third most significant performance characteristics for business sustainability. Additionally, the “Reutilization (recycling) and reprocessing” under GSCM in manufacturing and “Responsiveness and speed toward customers needs” under ASCM are found difficult in attainment.

The G-A evaluation will assist in attaining performance excellence in day-to-day operations and overall functioning. The outcomes will help executives to plan strategic objectives and attaining success.

To reinforce the capabilities of SCM, wide extent of G-A dimensions are presented, concept of FPII is reported to manage knowledge risks based on identification of strong attributes and two technical approaches, i.e. DSA and DA under GIVTFNs are presented for attaining robust decision and directing managerial decision-making process.

The qualitative approach was applied the discover the optimum answers to the research objectives, which are (1) to understand the cultural and hedonistic characteristics of the (Lanna) Songkran festival; and (2) to examine the dilemma between cultural rituals and hedonistic activity for tourism.

This study used a case study of the Songkran festival in Chiang Mai to examine the dilemma between cultural rituals and hedonism for tourism, which brings lost or misperceived cultural values and identities. The semi-structured interview (SSI) with senior locals and participant observation during the festival was conducted in Chiang Mai, Thailand, to obtain the in-depth phenomena of the existing celebration pattern at the festival.

The study findings show three crucial phenomena that explain characteristics of unsynchronized cultural rituals and hedonistic activities for tourism: (1) the parallel phenomenon between cultural values and celebration practice, (2) the movement of local culture and(3) the hedonistic characteristics of the festival.

The study extends the knowledge on the interplay phenomena between cultural festivals and tourism; also, the involved stakeholders, such as local communities, public sectors and private sectors, can use the study findings in creating policies for using cultural festivals to promote a destination and urban economic development that will minimise cultural values distort while increase tourism economic values.

This study was conducted qualitatively, including SSIs and participant observation at the Songkran festival in Chiang Mai. The study findings were analysed, based on the empirical data, into significant themes representing the characteristics of dilemma phenomena within the festival.