Search results

Nowadays, residential buildings have become increasingly important due to the growing communities. The purpose of this study is to investigate the behavior of a steel structural framing system that incorporates lightweight load-bearing walls and slabs, and to compare the weight of materials used in cold-formed and hot-finished steel structural systems for affordable housing.

Four types of models consisting of 243 members were simulated. Model 1 is a cold-formed steel structural framing system, while Model 2 is a hot-finished steel structural framing system. Both Models 1 and 2 use lightweight wall panels and lightweight composite slabs. Models 3 and 4 are made with brick walls and precast reinforced concrete systems, respectively. These structures use different wall and slab materials, namely, brick walls and precast reinforced concrete. The analysis includes bending behavior, buckling resistance, shear resistance and torsional rotation analysis.

This study found that using thinner steel sections can increase the deflection value. Meanwhile, increasing member length and the ratio of slenderness will decrease buckling resistance. As the applied load increases, buckling deformation also increases. Furthermore, decreasing shear area causes a reduction in shear resistance. Thicker sections and the use of lightweight materials can decrease the torsional rotation value.

The weight comparison of the steel structures shows that Model 1, which is a cold-formed steel structure with lightweight wall panels and lightweight composite slabs, is the most suitable model due to its lightweight and affordability for housing. This model can also be used as a reference for the optimal design of modular structural framing using cold-formed steel materials in the field of civil engineering and as a promotional tool.

As an advanced manufacturing method, additive manufacturing (AM) technology provides new possibilities for efficient production and design of parts. However, with the continuous expansion of the application of AM materials, subtractive processing has become one of the necessary steps to improve the accuracy and performance of parts. In this paper, the processing process of AM materials is discussed in depth, and the surface integrity problem caused by it is discussed.

Firstly, we listed and analyzed the characterization parameters of metal surface integrity and its influence on the performance of parts and then introduced the application of integrated processing of metal adding and subtracting materials and the influence of different processing forms on the surface integrity of parts. The surface of the trial-cut material is detected and analyzed, and the surface of the integrated processing of adding and subtracting materials is compared with that of the pure processing of reducing materials, so that the corresponding conclusions are obtained.

In this process, we also found some surface integrity problems, such as knife marks, residual stress and thermal effects. These problems may have a potential negative impact on the performance of the final parts. In processing, we can try to use other integrated processing technologies of adding and subtracting materials, try to combine various integrated processing technologies of adding and subtracting materials, or consider exploring more efficient AM technology to improve processing efficiency. We can also consider adopting production process optimization measures to reduce the processing cost of adding and subtracting materials.

With the gradual improvement of the requirements for the surface quality of parts in the production process and the in-depth implementation of sustainable manufacturing, the demand for integrated processing of metal addition and subtraction materials is likely to continue to grow in the future. By deeply understanding and studying the problems of material reduction and surface integrity of AM materials, we can better meet the challenges in the manufacturing process and improve the quality and performance of parts. This research is very important for promoting the development of manufacturing technology and achieving success in practical application.

A new backward punch shape was designed and used in the hydroforming process of double-layer Y-shaped tubes to achieve uniform wall thickness. This study focuses on the implementation and effectiveness of this novel punch shape.

A numerical simulation and experimental validation of the hydroforming process of double-layer Y-shaped tubes under various backward punch, replenishment ratios (left and right feed ratios) and internal pressure loading paths was performed using finite elements. During the hydroforming process, an analysis was made on the distribution of stress, strain and wall thickness in both the inner and outer layers of the Y-shaped conduit.

The novel backward punch parallel to the main tube has been found to improve the distribution of wall thickness in Y-shaped tubes. By controlling the feeding ratio and modifying the loading path of the internal pressure, it is possible to obtain the optimal forming part of the double-layer Y-shaped tube. The comparison between the simulation and experimental results of the double-layer Y-shaped tube formed under the optimal path indicates that the error is within 5% and the distribution of wall thickness is consistent.

A novel backward punch technique is employed to control the hydroforming process in a Y-shaped tube. A study on hydroforming of double-layer Y-shaped tubes with asymmetric features and challenging forming conditions is being suggested.

This paper aims to provide a critical review of water generation from atmospheric air by using desiccant materials. Over the past few years, there has been very high stress on water scarcity, especially in Asian and African countries. Because of this insecurity, many countries are focusing on their research in the field of water technologies. Water generation from atmospheric air by using desiccant materials is one of the techniques among the air-to-water generators (AWGs).

A structured and systematic literature review has been presented to observe and understand the past trend/patterns in the field of water generation from atmospheric air by using desiccant materials. To understand the water generation technologies based on desiccant materials, the research papers from the years 1987 to 2022 have been studied and included.

The properties of the different and most probable desiccant materials in the field of AWGs have been discussed. A detailed review of testing reports of collected water samples has also been presented in tabular form. Finally, the economic analysis has been done and future prospects have been discussed. It is also found that the capacity of solid desiccant materials to adsorb the water is less as compared to liquid desiccant materials. But, the adsorption capacity can be improved by using composite desiccant materials.

The uniqueness of this manuscript lies in the compiling and examination of the existed published research papers, including variables such as author, year and geographical location, experimental/simulative, types of desiccant material, type of setup, desiccant material type and quantity and type of concentrator. This manuscript provides critique to the empirical and conceptual research in AWG technologies and also stimulates researchers to explore the topic very carefully.

This paper aims to discuss the potentials of interdisciplinary exercises that bring together art and design methodologies in expanding as well as redefining the given methods and principles of basic design in architecture education. The primary purpose is to improve the conventional, well-established principles and methodologies of basic design studios into fresh perspectives.

Focussing on the case study of a basic design studio assignment that translated Richard Serra's Verb List (1967-68) into space-generating operations, the authors analyse how a diagonal interdisciplinary approach to studio pedagogy opened up the basic design studio into the exploration of new concepts and approaches. The assignment encouraged architecture students to productively and creatively engage with a significant art historical work for the purposes of design thinking and exploration.

Findings reveal that the students explored the possible reciprocal influences between materials, actions, and issues of form and organisation, thereby operating in an interface between art, architecture and design surveying the possible interactions between these disciplines. Based on the outcome of this studio exercise, the authors argue that designing assignments that would bring together various and sometimes even conflicting approaches of different fields allow us to reassess and conceptualise anew the pedagogical aims and modi operandi.

The research is original in the ways in which it suggests many possibilities of dialogue, interaction and collaboration between art, design and architecture studios.

Stab-resistant body armor (SRBA) is used to protect the body from sharp knives. However, most SRBA materials currently have the disadvantages of large weight and thickness. This paper aims to prepare lightweight and high-performance SRBA by 3D printing truss structure and resin-filling method.

The stab resistance truss structure was prepared by the fused deposition modeling method, and the composite structure was formed after filling with resin for dynamic and quasi-static stab tests. The optimized structural plate can meet the standard GA68-2019. Digital image correlation technology was used to analyze the local strain changes during puncture. The puncture failure mode was summarized by the final failure morphologies. The explicit dynamics module in ANSYS Workbench was used to analyze the design of the overlapped structure stab resistance process in this paper.

The stab resistance performance of the 3D-printed structural plate is affected by the internal filling pattern. The stab resistance performance of 3D-printed structural parts was significantly improved after resin filling. The 50%-diamond-PLA-epoxy, with a thickness of only 5 mm was able to meet the stab resistance standard. Resins are used to increase the strength and hardness of the material but also to increase crack propagation and reduce the toughness of the material. The overlapping semicircular structure was inspired by the exoskeleton structure of the demon iron beetle, which improved the stab resistance between gaps. The truss structure can effectively disperse stress for toughening. The filled resin was reinforced by absorbing impact energy.

The 3D-printed resin-filled truss structure can be used to prepare high-performance stab resistance structural plates, which balance the toughness and strength of the overall structure and ultimately reduce the thickness and weight of the SRBA.

A shared cognitive schema is the fundamental source of tacit understanding within a team. This study aims to address how such a shared cognitive schema emerges and evolves in an interdisciplinary research team.

This study uses an exploratory single case study to analyze the emergence and evolution of a shared cognitive schema in an interdisciplinary research team systematically. The authors spent more than two years collecting data from the IAM team via semistructured interviews, archival data and observation. Subsequently, a framework for the resulting mechanism model was developed by analyzing the data using a three-step process.

This study shows that as the interdisciplinary research team develops, the shared cognitive schema passes through three stages: overlapping cognitive schema, complementary cognitive schema and synergetic cognitive schema. The mechanisms of overlap, complement and synergy play important roles. The convergent roles of partner-based recruiting, knowledge categorization and following the existing institution facilitate the overlapping of knowledge structures. Complementary cognitive schema sharing is facilitated by interdisciplinary member selection, knowledge stock expansion and the effects of accomplished mentors. The synergetic behaviors of group voice, interactive cognition and adaptive learning facilitate synergetic cognitive schema sharing.

This study is the first to discuss the emergence and evolution of a shared cognitive schema at the microlevel of knowledge structure and belief structure. It offers a new theoretical perspective on the development rules of scientific research teams and provides practical enlightenment regarding the establishment and operation of interdisciplinary research teams.

Aluminum alloy is considered an ideal material in aerospace, automobile and other fields because of its lightweight, high specific strength and easy processing. However, low hardness and strength of the surface of aluminum alloys are the main factors that limit their applications. The purpose of this study is to obtain a composite coating with high hardness and lubricating properties by applying GO–PVA over MAO coating.

A pulsed bipolar power supply was used as power supply to prepare the micro-arc oxidation (MAO) coating on 6061 aluminum sample. Then a graphene oxide-polyvinyl alcohol (GO–PVA) composite coating was prepared on MAO coating for subsequent experiments. Samples were characterized by Fourier infrared spectroscopy, X-ray diffraction, Raman spectroscopy and thermogravimetric analysis. The friction test is carried out by the relative movement of the copper ball and the aluminum disk on the friction tester.

Results showed that the friction coefficient of MAO samples was reduced by 80% after treated with GO–PVA composite film.

This research has made a certain contribution to the surface hardness and tribological issues involved in the lightweight design of aluminum alloys.

The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0427/

The purpose of this paper is to describe various aspects of the visco-elastoplastic (VEP) behavior of porous-hardened concrete samples in relation to standard tests.

The problem is formulated on the basis of the rheological-dynamic analogy (RDA). In this study, changes in creep coefficient, Poisson's ratio, damage variables, modulus of elasticity, strength and angle of internal friction as a function of porosity are defined by P and S wave velocities. The RDA model provides a description of the degradation process of material properties from their peak state to their ultimate values using void volume fraction (VVF).

Compared to numerous versions of acoustic emission tracking developed to analyze the behavior of total wave propagation in inhomogeneous media with density variations, the proposed model is comprehensive in interpretation and consistent with physical understanding. The comparison of the damage variables with the theoretical variables under the assumption of spherical voids in the spherical representative volume element (RVE) shows a satisfactory agreement of the results for all analyzed samples if the maximum porosities are used for comparison.

The paper presents a new mathematical-physical method for examining the effect of porosity on the characteristics of hardened concrete. Porosity is essentially related to density variations. Therefore, it was logical to define the limit values of porosity using the strain energy density.

The replenishment of construction materials heavily relies on the functioning of heavy machinery, which often leads to confusion and negotiations among construction work groups regarding the allocation rights of these materials. When multiple groups require the same construction materials, they often struggle to determine whether the delivered materials are intended for their own use or if they have encroached upon supplies designated for others. Such uncertainties and negotiations frequently result in delays in construction progress and have the potential to escalate into conflicts. To minimize misunderstandings among work groups and mitigate the risk of severe safety consequences, it is crucial to understand the decision-making processes involved in the interaction between work groups.

This paper adopts a game theory approach to examine the interactions among work groups from a safety perspective. Quantum response equilibrium (QRE), as a specialized form of game with incomplete information, is assumed to govern the behavior of work groups in this study. By conducting a questionnaire survey, interactive scenarios were simulated. A resource overlap scenario for high-altitude construction is established, with the key factors being the importance of construction materials, the time required to supplement materials, whether managers are present and the climate within the groups. The model parameters were estimated using the expectation–maximization algorithm. Additionally, individual traits and safety awareness are surveyed in the questionnaire, further explaining the results of the game.

The findings indicate that the likelihood of conflicts between work groups under resource overlap can be quantified. The radical behavior of construction work groups exhibits a positive correlation with the importance of construction materials and the time required for material replenishment. Furthermore, the presence of a safety climate and the oversight of management personnel play a significant role in maintaining the composure of construction work groups. The expanded results of the questionnaire demonstrate that there is considerable room for improvement in workers' safety awareness, and management approaches can be further enhanced to prevent unsafe behaviors from occurring.

A novel game theory model was developed to evaluate the behavior of construction groups in situations of resource overlap. This model offers practical suggestions to improve safety performance and efficiency in construction projects.