Search results

First is to develop the time truncated median control chart for the Rayleigh distribution (RD) and generalized RD (GRD), respectively. Second is to evaluate the performance of the proposed attribute control chart which depends on the average run length (ARL) and third is to include real life examples for application purpose of the proposed attribute control chart.

(1) Select a random sample of size n from each subgroup from the production process and put them on a test for specified time t, where t = ? × µe. Then, count the numbers of failed items in each subgroup up to time t. (2) Step 2: Using np chart, define D = np, the number of failures, which also a random variable follows the Binomial distribution. It is better to use D = np chart rather than p chart because the authors are using number of failure rather than proportion of failure p. When the process is in control, then the parameters of the binomial distribution are n and p0, respectively. (3) Step 3: The process is said to be in control if LCL = D = UCL; otherwise, the process is said to be out of control. Hence, LCL and UCL for the proposed control chart.

From the findings, it is concluded that the GRD has smaller ARL values than the RD for specified values of parameters, which indicate that GRD performing well for out of control signal as compared to the RD.

This developed control chart is applicable when real life situation coincide with RD and GRD.

Researcher can directly use presented study and save consumers from accepting bad lot and also encourage producers to make good quality products so that society can take benefit from their products.

This article dealt with time truncated attribute median control chart for non-normal distributions, namely, the RD and GRD, respectively. The structure of the proposed control chart is developed based on median lifetime of the RD and GRD, respectively.

This paper aims to present the design development and measurement of two aerodynamic slotted X-bands back-to-back planer substrate-integrated rectangular waveguide (SIRWG/SIW) to Microstrip (MS) line transition for satellite and RADAR applications. It facilitates the realization of nonplanar (waveguide-based) circuits into planar form for easy integration with other planar (microstrip) devices, circuits and systems. This paper describes the design of a SIW to microstrip transition. The transition is broadband covering the frequency range of 8–12 GHz. The design and interconnection of microwave components like filters, power dividers, resonators, satellite dishes, sensors, transmitters and transponders are further aided by these transitions. A common planar interconnect is designed with better reflection coefficient/return loss (RL) (S₁₁/S₂₂ ≤ 10 dB), transmission coefficient/insertion loss (IL) (S₁₂/S₂₁: 0–3.0 dB) and ultra-wideband bandwidth on low profile FR-4 substrate for X-band and Ku-band functioning to interconnect modern era MIC/MMIC circuits, components and devices.

Two series of metal via (6 via/row) have been used so that all surface current and electric field vectors are confined within the metallic via-wall in SIW length. Introduced aerodynamic slots in tapered portions achieve excellent impedance matching and tapered junctions with SIW are mitered for fine tuning to achieve minimum reflections and improved transmissions at X-band center frequency.

Using this method, the measured IL and RLs are found in concord with simulated results in full X-band (8.22–12.4 GHz). RLC T-equivalent and p-equivalent electrical circuits of the proposed design are presented at the end.

The measurement of the prototype has been carried out by an available low-cost X-band microwave bench and with a Keysight E4416A power meter in the microwave laboratory.

The transition is fabricated on FR-4 substrate with compact size 14 mm × 21.35 mm × 1.6 mm and hence economical with IL lie within limits 0.6–1 dB and RL is lower than −10 dB in bandwidth 7.05–17.10 GHz. Because of such outstanding fractional bandwidth (FBW: 100.5%), the transition could also be useful for Ku-band with IL close to 1.6 dB.

This study focuses on the banking systems evaluation in Portugal, Italy, Ireland, Greece and Spain (known as the PIIGS) during the financial and post-financial crisis period from 2009 to 2018.

A conditional robust nonparametric frontier analysis (order-m estimators) is used to measure banking efficiency combined with variables highlighting the effects of Non-Performing Loans. Next, a truncated regression is used to examine if institutional, macroeconomic, and financial variables affect bank performance differently. Unlike earlier studies, we use the Corruption Perception Index (CPI) as an institutional variable that affects banking sector efficiency.

This research shows that the PIIGS crisis affects each bank/country differently due to their various efficiency levels. Most of the study variables — CPI, government debt to GDP ratio, inflation, bank size — significantly affect banking efficiency measures.

The contribution of this article to the relevant banking literature is two-fold. First, it analyses the efficiency of the PIIGS banking system from 2009 to 2018, focusing on NPLs. Second, this is the first empirical study to use probabilistic frontier analysis (order-m estimators) to evaluate PIIGS banking systems.

Recent studies have observed rise in consumer’s ethical concerns about the online retailers while making a purchase decision. The impetus for businesses to use corporate social responsibility (CSR) is evident, but the effects of CSR motives on corresponding processes underlying cause-related marketing (CRM) patronage intention have not been thoroughly examined. This study, anchored on attribution theory, established a research model that better explains the influence of CSR motives on patronage intentions toward CRM-oriented online retailers. Additionally, this study aims to examine the moderating role of spirituality (SPT) on CSR motives and CRM patronage intention (CPI).

Primary data has been collected from 722 respondents and analyzed by using deep neural-network architecture by using the innovative PLS-SEM-ANN method to predict/rank the factors impacting CPI.

The results revealed the normalized importance of the predictors of CPI and found that value-driven motive was the strongest predictor, followed by strategic motive, SPT, age and stakeholder-driven motive. In contrast, egoistic motive, education and income were found insignificant.

The pandemic has transformed the way consumers shop and fortified the online economy, thereby resulting in a paradigm shift toward usage of e-commerce platforms. The results offer valuable insights to online retailers and practitioners for predicting patronage intentions by CSR motives and, thus, effectively engage CRM consumers by designing promotions in a way that would deeply resonate with them. This study assessed and predicted the factors influencing the CPI s, thereby guiding the online retailers to design CSR strategies and manage crucial CRM decisions.

Jubail Industrial City is one of the largest industrial centers in the Middle East, offering potential opportunities for renewable energy generation. This research paper presents a comprehensive analysis of the wind resources in Jubail Industrial City and proposes the design of a smart grid-connected wind farm for this strategic location.

The study used wind data collected at three different heights above ground level – 10, 50 and 90 m – over four years from 2017 to 2020. Key parameters, such as average wind speeds (WS), predominant wind direction, Weibull shape, scale parameters and wind power density (WPD), were analyzed. The study used Windographer, an exclusive software program designed to evaluate wind resources.

The average WS at the respective heights were 3.07, 4.29 and 4.58 m/s. The predominant wind direction was from the north-west. The Weibull shape parameter (k) at the three heights was 1.77, 2.15 and 2.01, while the scale parameter (c) was 3.36, 4.88 and 5.33 m/s. The WPD values at different heights were 17.9, 48.8 and 59.3 W/m², respectively.

The findings suggest that Jubail Industrial City possesses favorable wind resources for wind energy generation. The proposed smart grid-connected wind farm design demonstrates the feasibility of harnessing wind power in the region, contributing to sustainable energy production and economic benefits.

Despite considerable research on the subject, there is still some misunderstanding about what characterizes successful project delivery in construction projects. Evaluating project delivery success is crucial for organizations since it enables them to prepare for future growth through more effective project management mechanisms and rank the organization's projects for continuous improvement. There is considerable disagreement over a set of success criteria that can be applied to all kinds of projects when evaluating project delivery success, making it a complicated procedure for practitioners and scholars. This research seeks to alleviate the problem by validating and testing a systematic project delivery success model (3D integration model) in the Australian construction industry. The aim is to establish a dependable approach built upon prior research and reliable in evaluating delivery success for any project type.

Based on a novel project delivery success model, this research applies a case study methodology to analyse 40 construction projects undertaken by a single Australian project management consultancy. The research utilizes a mixed-method research approach and triangulates three sets of data. First, the project delivery success (PDS) scores of the projects are calculated by the model. Second, a qualitative analysis targeting the performance of the same projects using a different system called the performance assessment review (PAR) scores was obtained. These culminate in two sets of ranking. The third step seeks validation of results from the head of the partnering organization that has undertaken the projects.

The findings of this study indicate that the 3D integration model is accurate and reliable in measuring the success of project delivery in construction projects of various sizes, locations and durations. While the model uses six key performance indicators (KPIs) to measure delivery success, it is evident that three of these may significantly improve the likelihood of PDS: value, speed and impact. Project managers should focus on these priority aspects of performance to generate better results.

Restrictions inherent to the case study approach are identified for this mixed-method multiple-case study research. There is a limitation on the sample size in this study. Despite the researcher's best efforts, no other firm was willing to share such essential data; therefore, only 40 case studies could be analysed. Nonetheless, the number of case studies met the literature's requirements for adequate units for multiple-case research. This research only looked at Australian construction projects. Thus, the conclusions may not seem applicable to other countries or industries. The authors investigated testing the PDS in the construction sector. It can assist in improving efficiency and resource optimization in this area. Nonetheless, the same technique may be used to analyse and rank the success of non-construction projects.

Despite the research conducted previously on the PDS of construction projects, there is still confusion among researchers and practitioners about what constitutes a successful project delivery. Although several studies have attempted to address this confusion, no consensus on consistent performance metrics or a practical project success model has been formed. More importantly, (1) the ability to measure success across multiple project types, (2) the use of triple bottom line (TBL) to incorporate sustainability in evaluating delivery success and (3) the use of a complexity measurement tool to adjust delivery success scores set the 3D integration model apart from others.

This study empirically demonstrates a contradiction between pillar 3 of Basel norms III and the designation of Systemically Important Banks (SIBs), also known as Too Big to Fail (TBTF). The objective of this study is threefold, which has been approached in a phased manner. The first is to determine the systemic importance of the banks under study; second, to examine if market discipline exists at different levels of systemic importance of banks and lastly, to examine if the strength of market discipline varies at different levels of systemic importance.

This study is based on all the public and private sector banks operating in the Indian banking sector. The Gaussian Mixture Model algorithm has been utilized to classify banks into distinct levels of systemic importance. Thereafter, market discipline has been observed by analyzing depositors' sentiments toward banks' risk (CAMEL indicators). The analysis has been performed by employing the system Generalized Method of Moments (GMM) to estimate models with different dependent variables.

The findings affirm the existence of market discipline across all levels of systemic importance. However, the strength of market discipline varies with the systemic importance of the banks, with weak market discipline being a negative externality of the SIBs designation.

By employing the Gaussian Mixture Model algorithm to develop a framework for categorizing banks on the basis of their systemic importance, this study is the first to go beyond the conventional method as outlined by the Reserve Bank of India (RBI).

Concrete-filled double skin tube (CFDST) columns are considered one of the most effective steel-concrete composite sections owing to the higher load carrying capacity as compared to its counterpart concrete-filled tube (CFT) columns. This paper aims to numerically investigate the performance of axially loaded, circular CFDST short columns, with the innovative strengthening technique of providing stiffeners in outer tubes. Circular steel hollow sections have been adopted for inner as well as outer tubes, while varying the length of rectangular steel stiffeners, fixed inside the outer tubes only, to check the effect of stiffeners in partially and full-length stiffened CFDST columns.

The behaviour of these CFDST columns is investigated numerically by using a verified finite element analysis (FEA) model from the ABAQUS. The behaviour of 20-unstiffened, 80-partially stiffened and 20-full-length stiffened CFDST columns is studied, while varying the strength of steel (f_yo = 250–750 MPa) and concrete (30–90 MPa).

The FEA results are verified by comparing them with the previous test results. FEA study has exhibited that, there is a 7%–25% and 39%–49% increase in peak-loads in partially stiffened and full-length stiffened CFDST columns, respectively, compared to unstiffened CFDST columns.

Enhanced strength has been observed in partially stiffened and full-length stiffened CFDST columns as compared to unstiffened CFDST columns. Also, a significant effect of strength of concrete has not been observed as compared to the strength of steel.

COVID-19 has occurred in more than 150 countries and causes a huge impact on the health of many people. The main purpose of this work is, COVID-19 has occurred in more than 150 countries and causes a huge impact on the health of many people. The COVID-19 diagnosis is required to detect at the beginning stage and special attention should be given to them. The fastest way to detect the COVID-19 infected patients is detecting through radiology and radiography images. The few early studies describe the particular abnormalities of the infected patients in the chest radiograms. Even though some of the challenges occur in concluding the viral infection traces in X-ray images, the convolutional neural network (CNN) can determine the patterns of data between the normal and infected X-rays that increase the detection rate. Therefore, the researchers are focusing on developing a deep learning-based detection model.

The main intention of this proposal is to develop the enhanced lung segmentation and classification of diagnosing the COVID-19. The main processes of the proposed model are image pre-processing, lung segmentation and deep classification. Initially, the image enhancement is performed by contrast enhancement and filtering approaches. Once the image is pre-processed, the optimal lung segmentation is done by the adaptive fuzzy-based region growing (AFRG) technique, in which the constant function for fusion is optimized by the modified deer hunting optimization algorithm (M-DHOA). Further, a well-performing deep learning algorithm termed adaptive CNN (A-CNN) is adopted for performing the classification, in which the hidden neurons are tuned by the proposed DHOA to enhance the detection accuracy. The simulation results illustrate that the proposed model has more possibilities to increase the COVID-19 testing methods on the publicly available data sets.

From the experimental analysis, the accuracy of the proposed M-DHOA–CNN was 5.84%, 5.23%, 6.25% and 8.33% superior to recurrent neural network, neural networks, support vector machine and K-nearest neighbor, respectively. Thus, the segmentation and classification performance of the developed COVID-19 diagnosis by AFRG and A-CNN has outperformed the existing techniques.

This paper adopts the latest optimization algorithm called M-DHOA to improve the performance of lung segmentation and classification in COVID-19 diagnosis using adaptive K-means with region growing fusion and A-CNN. To the best of the authors’ knowledge, this is the first work that uses M-DHOA for improved segmentation and classification steps for increasing the convergence rate of diagnosis.

Disinformation on social media is a serious issue. This study examines the effects of disinformation on COVID-19 vaccination decision-making to understand how social media users make healthcare decisions when disinformation is presented in their social media feeds. It examines trust in post owners as a moderator on the relationship between information types (i.e. disinformation and factual information) and vaccination decision-making.

This study conducts a scenario-based web survey experiment to collect extensive survey data from social media users.

This study reveals that information types differently affect social media users' COVID-19 vaccination decision-making and finds a moderating effect of trust in post owners on the relationship between information types and vaccination decision-making. For those who have a high degree of trust in post owners, the effect of information types on vaccination decision-making becomes large. In contrast, information types do not affect the decision-making of those who have a very low degree of trust in post owners. Besides, identification and compliance are found to affect trust in post owners.

This study contributes to the literature on online disinformation and individual healthcare decision-making by demonstrating the effect of disinformation on vaccination decision-making and providing empirical evidence on how trust in post owners impacts the effects of information types on vaccination decision-making. This study focuses on trust in post owners, unlike prior studies that focus on trust in information or social media platforms.