Search results

The durability of concrete containing recycled aggregates, sourced from concrete specimens that have been tested in laboratory testing facilities, remains understudied. This paper aims to present the results of experiments investigating the effect of incorporating such type of concrete waste on the strength and durability-related properties of concrete.

A total of 77 concrete cylinders sized Ø100 × 200 mm with varying amount of recycled concrete aggregate (RCA) (0%–100% by volume, at 25% increments) and maximum aggregate size (12.5, 19.0 and 25.0 mm) were fabricated and tested for slump, compressive strength, sorptivity and electrical resistivity. Disk-shaped specimens, 50-mm thick, were cut from the original cylinders for sorptivity and resistivity tests. Analysis of variance and post hoc test were conducted to detect statistical variability among the data.

Compared to regular concrete, a reduction of slump (by 18.6%), strength (15.1%), secondary sorptivity (31.5%) and resistivity (17.0%) were observed from concrete containing 100% RCA. Statistical analyses indicate that these differences are significant. In general, an aggregate size of 19 mm was found to produce the optimum value of slump, compressive strength and sorptivity in regular and RCA-added concrete.

The results of this study suggest that comparable properties of normal concrete were still achieved by replacing 25% of coarse aggregate volume with 19-mm RCA, which was processed from laboratory-tested concrete samples. Therefore, such material can be considered as a potential and sustainable alternative to crushed gravel for use in light or nonstructural concrete construction.

Damage to reinforced concrete (RC) structural elements is inevitable. Such damage can be the result of several factors, including aggressive environmental conditions, overloading, inadequate design, poor work execution, fire, storm, earthquakes etc. Therefore, repairing and strengthening is one way to improve damaged structures, so that they can be reutilized. In this research, the use of an ultra high-performance fibre-reinforced concrete (UHPFRC) layer is proposed as a strengthening material to rehabilitate damaged-RC beams. Different strengthening schemes pertaining to the structural performance of the retrofitted RC beams due to the flexural load were investigated.

A total of 13 normal RC beams were prepared. All the beams were subjected to a four-point flexural test. One beam was selected as the control beam and tested to failure, whereas the remaining beams were tested under a load of up to 50% of the ultimate load capacity of the control beam. The damaged beams were then strengthened using a UHPFRC layer with two different schemes; strip-shape and U-shape schemes, before all the beams were tested to failure.

Based on the test results, the control beam and all strengthened beams failed in the flexural mode. Compared to the control beam, the damaged-RC beams strengthened using the strip-shape scheme provided an increase in the ultimate load capacity ranging from 14.50% to 43.48% (or an increase of 1.1450 to 1.4348 times), whereas for the U-shape scheme beams ranged from 48.70% to 149.37% (or an increase of 1.4870–2.4937 times). The U-shape scheme was more effective in rehabilitating the damaged-RC beams. The UHPFRC mixtures are workable, as well easy to place and cast into the formworks. Furthermore, the damaged-RC beams strengthened using strip-shape scheme and U-shape scheme generated ductility factors of greater than 4 and 3, respectively. According to Eurocode8, these values are suitable for seismically active regions. Therefore, the strengthened damaged-RC beams under this study can quite feasibly be used in such regions.

Observations of crack patterns were not accompanied by measurements of crack widths due to the unavailability of a microcrack meter in the laboratory. The cost of the strengthening system application were not evaluated in this study, so the users should consider wisely related to the application of this method on the constructions.

Rehabilitation of the damaged-RC beams exhibited an adequate structural performance, where all strengthened RC beams fail in the flexural mode, as well as having increment in the failure load capacity and ductility. So, the used strengthening system in this study can be applied for the building construction in the seismic regions.

Aside from equipment, application of this strengthening system need also the labours.

The use of sand blasting on the surfaces of the damaged-RC beams, as well as the application of UHPFRC layers of different thicknesses and shapes to strengthen the damaged-RC beams, provides a novel innovation in the strengthening of damaged-RC beams, which can be applicable to either bridge or building constructions.

This study aims to analyse the influence of digitalisation on the management control function of small and medium-sized enterprises (SMEs). In particular, it aims to illuminate how digitalisation influences management control elements, organisation and roles/competencies and to identify obstacles to digitalisation of management control in SMEs and measures taken to overcome them.

The study is based on guideline-supported expert interviews conducted with 14 financial managers from SMEs in Germany, Austria and Switzerland.

This study reveals the influence of digitalisation on management control elements, organisation, and roles/competencies. The automation and standardisation of management control processes result in new elements for management control, such as strategic support for management. In addition, the increased availability and transparency of data enable the use of instruments within a company that allow for quick analyses of the company's development. Digitalisation leads to the integration of management control into the corporate network and, thus, a change in the organisation of management control. It also triggers the expansion of management control competencies, especially IT competencies. A shortage of internal digitalisation resources, unclear corporate roadmaps, and a lack of managerial experience loom as central challenges for digitalising the management control function. Measures derived from the interviews can help SMEs overcome the obstacles to the digitalisation of management control.

This research is the first interview-based study of the impact of digitalisation on management control in SMEs, potential obstacles to that digitalisation, and measures to overcome those obstacles. Thus, it contributes to the emerging debate on factors that may explain why SMEs lag in terms of the digitalisation of their internal processes.

Previous studies have postulated that an advance payment system (APS) positively impacts the contractor's working capital and is paramount to ensuring an efficient and effective project cash flow process. However, scant research has been undertaken to empirically establish the cash flow performance and domino effect of APS on project and organisational performance.

The epistemological design adopted a positivist philosophical stance augmented by deductive reasoning to explore the phenomena under investigation. Primary quantitative data were collected from 504 Construction Industry Development Board (CIDB) registered contractors (within the grade bandings 1–9) in South Africa. A five-point Likert scale was utilised, and subsequent data accrued were analysed using structural equation modelling (SEM).

Emergent findings reveal that the mandatory use of an APS does not guarantee a positive project cash flow, an improvement in organisational performance or an improvement in project performance.

The ensuing discussion reveals the contributory influence of APS on positive cash flow and organisational performance, although APS implementation alone will not achieve these objectives. Practically, the research accentuates the need for various measures to be concurrently adopted (including APS) towards ensuring a positive project cash flow and improved organisational and project performance.

There is limited empirical research on cash flow performance and the domino effect of APS on project and organisational performance in South Africa, nor indeed, the wider geographical location of Africa as a continent. This study addresses this gap in the prevailing body of knowledge.

The purpose of this paper is to develop a prototype of a wearable medical device in the form of a bandage with a real-time data monitoring platform, which can be used domestically for diabetic patients to identify the possibility of foot ulceration at the early stage.

The prototype can measure blood volumetric change and temperature variation in the forefoot area simultaneously. The waveform extracted using a pulsatile-blood-flow signal was used to assess blood perfusion-related information, and hence, predict ischemic ulcers. The temperature difference between ulcerated and the reference was used to predict neuropathic ulcers. The medical device can be used as a bandage during the application wherein the sensory module is placed inside the hollow pocket of the bandage. A platform was developed through a mobile application where doctors can extract real-time information, and hence, determine the possibility of ulceration.

The height of the peaks in the pulsatile-blood-flow signal measured from the subject with foot ischemic ulcers is significantly less than that of the subject without ischemic ulcers. In the presence of ischemic ulcers, the captured waveform flattens. Therefore, the blood perfusion from arteries to the tissue of the forefoot is considerably low for the subject with ischemic ulcers. According to the temperature difference data measured over 25 consecutive days, the temperature difference of the subject with neuropathic ulcers occasionally exceeded the 4 °F range but mostly had higher values closer to the 4 °F range. However, the temperature difference of the subject who had no complications of neuropathic ulcers did not exceed the 4 °F range, and the majority of the measurements occupy a narrow range from −2°F to 2 °F.

The proposed prototype of wearable medical apparatus can monitor both temperature variation and pulsatile-blood-flow signal on the forefoot simultaneously and thereby predict both ischemic and neuropathic diabetes using a single device. Most importantly, the wearable medical device can be used domestically without clinical assistance with a real-time data monitoring platform to predict the possibility of ulceration and the course of action thereof.

Knowledge transfer which refers to the communication of knowledge from a source so that it is learned and applied by a recipient has long been a challenge for knowledge management. The purpose of this study is to understand influencing factors of transactive memory system (TMS) and knowledge transfer.

Drawing on the theories of communication visibility, social distance and flow, this study develops a research model. Then, data are collected from users of the social media mobile App. Partial least squares-structural equation modeling (PLS-SEM) is employed to analyze data.

TMS is a valid second-order construct in the social media mobile app context, which is more reflected by credibility. Meanwhile, communication visibility and social distance each have positive effects on TMS which further has a positive effect on knowledge transfer. Flow has a positive effect on knowledge transfer.

Developers of the mobile App should carefully consider the role of information and communication technology (ICT) in supporting TMS and knowledge transfer. They should consider recommendation algorithm so that the benefit of communication visibility can be retained. They should design the feature to classify users based on similarity so as to stimulate users' feeling of close social distance. They should keep on improving features based on users' holistic experience.

This study incorporates the perspectives of communication visibility, social distance and flow to understand TMS and knowledge transfer, presenting a new lens for research.

This study aims to examine the relationship between the environment and tourism flows, as well as the economic variables of the 32 states of Mexico for the period 1999–2019 based on data availability. The related literature studying tourism and environmental impacts is scarce at a national level, with most of them being local case studies. Some international studies find that if the relationship exists, it is weak or nonexistent, using CO₂ as a proxy in most cases.

The present study uses panel data and cointegration panel methodologies, while also using geographic information systems to observe the distribution of variables at a state level between tourism and environmental variables.

The findings of the study are as follows: state gross domestic product, the inertia of environmental variables (i.e. volume of water treatment and solid waste), occupied rooms (proxy variable for tourism activity) and average temperature have an impact on the contemporary evolution of environmental variables; national and international tourist variables have no impact on the environment; the panels are integrated in such a way that there is a long-term equilibrium between states and some environmental care variables; and no conclusive evidence is found regarding the impact of tourism activity on the considered environmental variables.

The main limitations and areas of opportunity of the work refer to the amount of data available over time and the precision of the measurement of the variables. The availability, temporality and frequency of the data are also limitations of the research. An example of this is the nonexistence of CO₂ emissions at the state level. Additionally, studying other countries and regions for which there are limitations of data and applied studies is also a challenge.

The results are important for economies (in growth) and societies whose economic growth depends on tourism flows and have done little to reverse the damage that tourism has on the environment.

The models can contribute to study the relation between tourism and environmental variables and could be extended to regions, states and provinces for decision-making on actions to be taken for the present and future.

The originality of the research is innovative for the region: Mexico, Central and Latin America. There are no works that have studied these problems with this methodology and these variables. In terms of originality, the classic models of panel data and cointegration of panel data are useful and easily replicable for others to use for different countries. The results are relevant because there is apparently no relationship between tourism and some environmental variables in the short run, but there exists a weak and strong long-run relation between some of them.

本研究采用面板数据和协整面板模型方法, 同时利用地理信息系统(gis)观察州一级层面旅游和环境方面的变量分布。

本研究根据数据可用性, 研究了墨西哥32个州1999–2019年期间环境与旅游流量及经济变量之间的关系。在国家层面上研究旅游与环境影响的相关文献很少, 而且大多是地方的个案研究。一些国际研究发现, 即使有这种关系, 大多数案例中使用二氧化碳作为替代变量, 这种关系也是很弱或不存在。

i)国家国内生产总值, 环境变量的惯性(即水处理量和固体废物量), 占用的房间(旅游活动的代理变量)和平均温度对环境变量的现有演化有影响。ii)国内和国际旅游变量对环境没有影响。iii)面板数据以这样一种方式集成, 即国家和一些环境变量之间存在一种长期平衡。iv)关于旅游活动对所考虑的环境变量的影响没有确凿的证据。

这项工作的主要局限和机会领域是指随着时间的推移可获得的数据量和变量测量的精度。数据的可用性、时效性和频率也是本研究的局限性。这方面的一个例子是在州一级不存在二氧化碳排放。此外, 由于数据和应用研究的局限, 研究其他国家和地区也是一个挑战。

研究结果对经济增长依赖旅游业流量的经济体和社会具有重要意义, 这些经济体和社会对扭转旅游业对环境的破坏方面做得还不够。

这些模型有助于研究旅游业与环境变量之间的关系, 并可推广到地区、州和省, 以制定当前和未来的行动决策。

这项研究的原创性对该地区(墨西哥、中美洲和拉丁美洲)来说是具有创新性的。没有人用这种方法和这些变量研究过这些问题。就原创性而言, 面板数据和面板数据协整的经典模型是有用的且易于复制, 可供其他国家使用。 研究结果具有一定的相关性, 因为旅游业与部分环境变量在短期内不存在明显的相关性, 但在它们中的一些变量在长期内存在着或强或弱的相关性。

Se examina la relación entre medio ambiente y flujos turísticos, así como variables económicas de los 32 estados de México para el período 1999-2019 basado en la disponibilidad de datos. La literatura relacionada que estudia el turismo y los impactos ambientales es escasa a nivel nacional, siendo la mayoría de ellos estudios de casos locales. Estudios internacionales encuentran que, si la relación existe, es débil o inexistente, utilizando el CO2 como un indicador en la mayoría de los casos.

Se utilizaron metodologías de datos de panel y cointegración de panel, además sistemas de información geográfica para observar la distribución de variables a nivel estatal.

i) El Producto Interno Bruto Estatal, la inercia de las variables ambientales (es decir, volumen de tratamiento de agua y residuos sólidos), habitaciones ocupadas (proxy de la actividad turística) y temperatura promedio tienen un impacto en la evolución contemporánea de las variables ambientales, ii) las variables turísticas nacionales e internacionales no tienen un impacto en el medio ambiente, iii) los paneles están integrados de tal manera que existe un equilibrio a largo plazo entre turismo, crecimiento económico y algunas variables ambientales, y iv) no se encuentra evidencia concluyente con respecto al impacto de la actividad turística en las variables ambientales consideradas.

Las principales limitaciones y áreas de oportunidad del trabajo se refieren a la cantidad de datos disponibles en el tiempo y a la precisión de la medición de las variables. La disponibilidad, temporalidad y frecuencia de los datos también son limitaciones de la investigación. Un ejemplo de ello es la inexistencia de emisiones de CO2 a nivel estatal. Además, el estudio de otros países y regiones para los que existen limitaciones de datos y estudios aplicados también es un reto.

Los resultados son importantes para las economías (en crecimiento) y las sociedades cuyo crecimiento económico depende de los flujos turísticos y que han hecho poco por invertir los daños que el turismo produce en el medio ambiente.

Los modelos pueden contribuir a estudiar la relación entre el turismo y las variables medioambientales y podrían extenderse a regiones, estados y provincias para la toma de decisiones sobre las acciones a emprender para el presente y el futuro.

El artículo proporciona un análisis innovador y exploratorio hacia una perspectiva futura que agrega valor al turismo y la planificación para la sostenibilidad. La relación entre turismo y medio ambiente se ha estudiado durante varios años. La UNTWO ha abordado las consecuencias del turismo en el medio ambiente, particularmente, más basura, mayor consumo de agua, emisiones de CO2 y otros aspectos. Pocos trabajos estudian la relación entre estas variables.

La originalidad de la investigación es innovadora para la región: México, América Central y América Latina. No existen trabajos que hayan estudiado estos problemas con esta metodología y estas variables.

En términos de originalidad, los modelos clásicos de datos de panel y cointegración de datos de panel son útiles y fácilmente replicables para que otros los utilicen en diferentes países.

Los resultados son relevantes porque aparentemente no hay una relación entre el turismo y algunas variables ambientales a corto plazo, existe una relación débil y fuerte a largo plazo entre algunas de ellas.

This study aims to explore the empirical correlation between patient flow issues, quality of green health services and patient satisfaction in specialist medical department factors from patients’ perspectives as service consumers.

This research is a type of nonintervention empirical research that uses an open survey to explore the views and experiences of users of specialist medical department services. The targeted population is hospital patients included in the top five national PERSI (Indonesian Hospital Association) Award 2022 Green Hospital Category, with a total number of respondents of 572 people. This study uses the partial least square-structural equation modeling analysis method with the SmartPLS application.

Patient flow problems generally affect the quality of eco-friendly health services, except for the waiting time problem, which affects service quality. It should be understood as a top priority for patients to receive services from medical specialists without risking time as a core service aspect from the patient’s perspective. In addition, all variables in eco-friendly hospital services affect patient satisfaction, except in the case of visits to specialist medical departments, which do not affect medical support services and hospital practices that are responsive to the delivery of care services resulting from medical support services that are inseparable in integrated services as well as health care following medical ethics.

This study has a novelty in understanding the implications of green practice in determining patient satisfaction in medical specialist department as the epicenter of hospital services and the main object of assessment for the quality of hospital services.

The discussion on international migration has become a significant part of globalization and a topical issue in international relations, especially in developing economies which mostly relies on migrant remittances. The purpose of the study is to examine whether financial market development (equity market development and banking sector development) really drives migrant remittance flow in Sub-Saharan Africa (SSA).

The study employs the dynamic heterogeneous panel data approach-the pool mean group (PMG) and the mean group (MG) techniques in analyzing the model based on data obtained from 27 SSA countries covering the period 2000–2020.

The findings of the study revealed that financial market development (equity market development and banking sector development) is a key driver of migrant remittances flows in the SSA region. In addition, the study revealed that the following macroeconomic variables such as real interest rate, unemployment rate, global growth, emigration, and economic growth are also determinants of migrant remittances flows in the SSA region.

The reviewed empirical literature revealed that several studies documents that the macroeconomic determinants of migrant remittances include inflation, GDP, interest rate, exchange rate, population growth, financial sector development and unemployment rate. Most of these studies fail to capture both equity market development and robust banking sector development (financial market development) as critical drivers of migrant remittances flow in SSA. Also, this study uses a robust measure of equity market development and banking sector development, unlike previous studies.

The peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-05-2023-0361