Search results

This new paper aims to combine the recent new contributions about direct data driven control and other safety property to form an innovative direct data driven safety control for aircraft flight system. More specifically, within the framework of direct data driven strategy, the collected data are dealt with to get the identified plant and designed controller. After reviewing some priori information about aircraft flight system, a closed loop system with the unknown plant and controller simultaneously is considered. Data driven estimation is proposed to identify the plant and controller only through the ratios of two correlation functions, computed from the collected data. To achieve the dual missions about perfect tracking and safety property, a new notion about safety controller is introduced. To design this safety controller, direct data driven safety controller is proposed to solve one constrain optimization problem. Then the authors apply the Karush–Kuhn–Tucker (KKT) optimality conditions to derive the explicit safety controller.

First, consider one closed loop system corresponding to aircraft flight system with the unknown plant and feed forward controller, data driven estimation is used to identify the plant and feed forward controller. This identification process means nonparametric estimation. Second, to achieve the perfect tracking one given transfer function and guarantee the closed loop output response within one limited range simultaneously, safety property is introduced. Then direct data driven safety control is proposed to design the safety controller, while satisfying the dual goals. Third, as the data driven estimation and direct data driven safety control are all formulated as one constrain optimization problem, the KKT optimality conditions are applied to obtain the explicit safety controller.

Some aircraft system identification and aircraft flight controller design can be reformulated as their corresponding constrain optimization problems. Then through solving these constrain optimization problems, the optimal estimation and controller are yielded, while satisfying our own priori goals. First, data driven estimation is proposed to get the rough estimation about the plant and controller. Second, data driven safety control is proposed to get one safety controller before our mentioned safety concept.

To the best of the authors’ knowledge, some existing theories about nonparametric estimation and tube model predictive control are very mature, but few contributions are applied in practice, such as aircraft system identification and aircraft flight controller design. This new paper shows the new theories about data driven estimation and data driven safety control on aircraft, being corresponded to the classical nonparametric estimation and tube model predictive control. Specifically, data driven estimation gives the rough estimations for the aircraft and its feed forward controller. Furthermore, after introducing the safety concept, data driven safety control is introduced to achieve the desired dual missions with the combination of KKT optimality conditions.

The purpose of this paper is to present a comparative study of flight circumstances, dynamic stability characteristics and controllability for two transport aircraft in severe atmospheric turbulence at transonic cruise flight for the purpose to obtain the prevention concepts of injuries to passengers and crew members for pilot training in International Air Transport Association (IATA) – Loss of Control In-flight (LOC-I) program.

A twin-jet and a four-jet transport aircraft encountering severe atmospheric turbulence are the study cases for this paper. The nonlinear unsteady aerodynamic models are established through flight data mining and the fuzzy-logic modeling technique based on the flight data of flight data recorder. This method can be adopted to examine the influence of horizontal wind shear and crosswind on loss of control, dynamic stability characteristics and controllability for transport aircraft in different weights and different sizes in tracking aviation safety of existing different types of aircraft.

The horizontal wind shear or crosswind before the turbulence encounter will easily induce rolling motion and then initiate the sudden plunging motion during the turbulence encounter. The roll rate will increase the oscillatory rolling motion during plunging motion, if the rolling damping is insufficient. The drop-off altitude will be enlarged by the oscillatory rolling motion during the sudden plunging motion.

A lack of the measurement data of vertical wind speed sensor on board to verify the estimated values of damping term is one of the research limitations for this study. The fact or condition of being severe in sudden plunging motion can be judged through the analysis of oscillatory derivatives with both dynamic stability and damping terms.

The roll rate will increase the oscillatory rolling motion during plunging motion, if the rolling damping is insufficient. The drop-off altitude will be enlarged by the oscillatory rolling motion during the sudden plunging motion. The horizontal wind shear or crosswind before the turbulence encounter will easily induce rolling motion and then initiated the sudden plunging motion during the turbulence encounter. If the drift angle is large, to turn off the autopilot of yaw control first and stabilize the rudder by the pedal. When passing through the atmosphere turbulence area, the pilots do not need to amend the heading angle urgently.

The flight safety prevention in avoidance of injuries for passengers and cabin crews is essential for the airlines. The horizontal wind shear or crosswind before the turbulence encounter will easily induce rolling motion and then initiated the sudden plunging motion during the turbulence encounter.

The flight safety prevention in avoidance of injuries for passengers and cabin crews is essential. The present assessment method is an innovation to examine the loss of control problems of aviation safety and promote the understanding of aerodynamic responses of the jet transport aircraft. It is expected to provide a valuable lecture for the international training courses for IATA – LOC-I program after this paper is being published.

This research study aims to minimize autonomous flight cost and maximize autonomous flight performance of a slung load carrying rotary wing mini unmanned aerial vehicle (i.e. UAV) by stochastically optimizing autonomous flight control system (AFCS) parameters. For minimizing autonomous flight cost and maximizing autonomous flight performance, a stochastic design approach is benefitted over certain parameters (i.e. gains of longitudinal PID controller of a hierarchical autopilot system) meanwhile lower and upper constraints exist on these design parameters.

A rotary wing mini UAV is produced in drone Laboratory of Iskenderun Technical University. This rotary wing UAV has three blades main rotor, fuselage, landing gear and tail rotor. It is also able to carry slung loads. AFCS variables (i.e. gains of longitudinal PID controller of hierarchical autopilot system) are stochastically optimized to minimize autonomous flight cost capturing rise time, settling time and overshoot during longitudinal flight and to maximize autonomous flight performance. Found outcomes are applied during composing rotary wing mini UAV autonomous flight simulations.

By using stochastic optimization of AFCS for rotary wing mini UAVs carrying slung loads over previously mentioned gains longitudinal PID controller when there are lower and upper constraints on these variables, a high autonomous performance having rotary wing mini UAV is obtained.

Approval of Directorate General of Civil Aviation in Republic of Türkiye is essential for real-time rotary wing mini UAV autonomous flights.

Stochastic optimization of AFCS for rotary wing mini UAVs carrying slung loads is properly valuable for recovering autonomous flight performance cost of any rotary wing mini UAV.

Establishing a novel procedure for improving autonomous flight performance cost of a rotary wing mini UAV carrying slung loads and introducing a new process performing stochastic optimization of AFCS for rotary wing mini UAVs carrying slung loads meanwhile there exists upper and lower bounds on design variables.

This paper aims to present assessment of models and simulation results used in the development process of flight stabilisation system that uses trim tabs for PZL-130 Orlik turboprop military trainer aircraft. Flight test of the system allowed to compare software and hardware simulation results with real flight recordings.

Proposed flight stabilisation system was developed using modern techniques of model-based design, automatic code generation, software and hardware in the loop testing. The project reached flight testing stage which allowed to gather data to verify models and simulation results and asses their quality.

Results of the comparison showed that the trim tab actuator model used in simulation can be improved by adding play. This reduced the difference between simulation and real flight system output – actuator angle. The influence of airloads on the flying actuator angle compared to hardware in the loop simulation in lab is less than ± 0.6°.

Proposed flight stabilisation system that uses trim tabs has several benefits over classic automatic flight system in terms of weight, energy consumption and structure simplicity and does not need aircraft primary control modification. It was developed using modern techniques of model-based design, automatic code generation and hardware in the loop simulations.

The purpose of this paper is to optimize the simultaneous flight performance of a hexarotor unmanned aerial vehicle (UAV) by using simultaneous perturbation stochastic approximation (i.e. SPSA), deep neural network and proportional integral derivative (i.e. PID) according to varying arm length (i.e. morphing).

In this paper, proper PID gain coefficients and morphing ratio were obtained using the stochastic optimization method, also known as SPSA to maximize flight efficiency. Because it is difficult to establish an analytical connection between the morphing ratio and hexarotor moments of inertia, the deep neural network was used to obtain the moments of inertia according to the morphing ratio. By using SPSA and deep neural network, the best performance indexes were obtained and both longitudinal and lateral flight simulations were performed with the obtained data.

With SPSA, the best PID coefficients and morphing ratio are obtained for both longitudinal and lateral flight. Because the hexarotor solid body model changes according to the morphing ratio, the moment of inertia values used in the simulations also change. According to the morphing ratio, the moment of inertia values was obtained with the deep neural network over a created data set.

It takes a long time to obtain the morphing ratio suitable for the hexarotor model and the PID gain coefficients suitable for this morphing ratio. However, this situation can be overcome with the proposed SPSA. In addition, it takes a long time to obtain the appropriate moments of inertia according to the morphing ratio. However, in this case, it was overcome using the deep neural network.

Determining the morphing ratio and PID gain coefficients using the optimization method, as well as determining the moments of inertia using the deep neural network, is very useful as it can increase the efficiency of hexarotor flight and flight efficiently with different arm lengths. With the proposed method, the hexarotor design performance criteria (i.e. rise time, settling time and overshoot) values were significantly improved compared to similar studies.

Determining the hexarotor flight parameters using SPSA and deep neural network provides advantages in terms of time, cost and applicability.

The hexarotor flight efficiency is improved with the proposed SPSA and deep neural network approaches. In addition, the desired flight parameters can be obtained more quickly and reliably with the proposed approaches. The design performance criteria were also improved, enabling the hexarotor UAV to follow the given trajectory in the best way and providing convenience for end users. SPSA was preferred because it converged faster than other methods. While other methods perform 2n operations per iteration, SPSA only performs two operations. To obtain the moment of inertia, many physical parameter values of the UAV are required in the existing methods. In the proposed method, by creating a date set, only arm length and moment of inertia were estimated without the need to obtain physical parameters with the deep neural network structure.

The purpose of this paper is to improve autonomous flight performance of a fixed-wing unmanned aerial vehicle (UAV) via simultaneous morphing wingtip and control system design conducted with optimization, computational fluid dynamics (CFD) and machine learning approaches.

The main wing of the UAV is redesigned with morphing wingtips capable of dihedral angle alteration by means of folding. Aircraft dynamic model is derived as equations depending only on wingtip dihedral angle via Nonlinear Least Squares regression machine learning algorithm. Data for the regression analyses are obtained by numerical (i.e. CFD) and analytical approaches. Simultaneous perturbation stochastic approximation (SPSA) is incorporated into the design process to determine the optimal wingtip dihedral angle and proportional-integral-derivative (PID) coefficients of the control system that maximizes autonomous flight performance. The performance is defined in terms of trajectory tracking quality parameters of rise time, settling time and overshoot. Obtained optimal design parameters are applied in flight simulations to test both longitudinal and lateral reference trajectory tracking.

Longitudinal and lateral autonomous flight performances of the UAV are improved by redesigning the main wing with morphing wingtips and simultaneous estimation of PID coefficients and wingtip dihedral angle with SPSA optimization.

This paper originally discusses the simultaneous design of innovative morphing wingtip and UAV flight control system for autonomous flight performance improvement. The proposed simultaneous design idea is conducted with the SPSA optimization and a machine learning algorithm as a novel approach.

A high-fidelity simulation platform helps to verify the feasibility of the controller and reduce the cost of subsequent experiments. Therefore, this paper aims to design a high-fidelity hardware-in-the-loop (HIL) simulation platform for the tail-sitter vehicles.

The component breakdown approach is used to develop a more reliable model. Thruster dynamics and ground contact force are also modeled. Accurate aerodynamic coefficients are obtained through wind tunnel tests. This simulation system adopts a mode transition method to achieve continuous simulation for all flight modes.

Simulation results are in good agreement with the flight log and successfully predict the state of the vehicle.

First, the effects of the propeller slipstream are considered. Second, most researchers ignore the parasitic drag caused by the landing gear and other appendages, which is discussed in this study. Third, a ground contact model is implemented to allow a realistic simulation of the takeoff and landing phases. Fourth, complete wind tunnel tests are conducted to obtain more accurate aerodynamic coefficients. Finally, a mode transition method is deployed in the HIL simulation system to achieve continuous simulation for all flight modes.

In this study, an indoor sensor information fusion positioning system of the quadrotor unmanned aerial vehicle (UAV) was investigated to solve the problem of unstable indoor flight positioning.

The presented system was built on Light Detection and Ranging (LiDAR), Inertial Measurement Unit (IMU) and LiDAR-Lite devices. Based on this, one can obtain the aircraft's current attitude and the position vector relative to the target and control the attitudes and positions of the UAV to reach the specified target positions. While building a UAV positioning model relative to the target for indoor positioning scenarios under limited Global Navigation Satellite Systems (GNSS), the system detects the environment through the NVIDIA Jetson TX2 (Transmit Data) peripheral sensor, obtains the current attitude and the position vector of the UAV, packs the data in the format and delivers it to the flight controller. Then the flight controller controls the UAV by calculating the posture to reach the specified target position.

The authors used two systems in the experiment. The first is the proposed UAV, and the other is the Vicon system, our reference system for comparison purposes. Vicon positioning error can be considered lower than 2 mm from low to high-speed experiments. After comparison, experimental results demonstrated that the system could fully meet the requirements (less than 50 mm) in real-time positioning of the indoor quadrotor UAV flight. It verifies the accuracy and robustness of the proposed method compared with that of Vicon and achieves the aim of a stable indoor flight preliminarily.

Vicon positioning error can be considered lower than 2 mm from low to high-speed experiments. After comparison, experimental results demonstrated that the system could fully meet the requirements (less than 50 mm) in real-time positioning of the indoor quadrotor UAV flight. It verifies the accuracy and robustness of the proposed method compared with that of Vicon and achieves the aim of a stable indoor flight preliminarily.

A low-level controller is critical to the overall performance of multirotor unmanned aerial vehicles. The purpose of this paper is to propose a nonlinear low-level angular velocity controller for multirotor unmanned aerial vehicles in various operating conditions (e.g. different speed and different mode).

To tackle the above challenge, the authors have designed a nonlinear low-level controller taking the actuator dynamics into account. The authors first build the actuator subsystem by combining the actuator dynamics with the angular velocity dynamics model. Then, a recursive low-level controller is developed by designing a high-gain observer to estimate unmeasurable states. Furthermore, a detailed stability analysis is given with the Lyapunov theory.

Simulation tests and real-world flying experiments are provided to validate the proposed approach. In particular, we illustrate the performance of the proposed controller using violent random command test, attitude mode flight and high-speed flight of up to 18.7 m/s in real world. Compared with the classical method used in PX4 autopilot and the estimation-based incremental nonlinear dynamic inversion method, experimental results show that the proposed method can further reduce the control error.

Low-level control of multirotor UAVs is challenging due to the complex dynamic characteristics of UAVs and the diversity of tasks. Although some progress has been made, the performance of existing methods will deteriorate as operating conditions change due to the disregard for the electromechanical characteristics of the actuator.

To solve the low-level angular velocity control problem in various operating conditions of multirotor UAVs, this paper proposes a nonlinear low-level angular velocity controller which takes the actuator dynamics into account.

This paper aims to extend the previous contributions about data-driven control in aircraft control system from academy and practice, respectively, combining iteration and learning strategy. More specifically, after returning output signal to input part, and getting one error signal, three kinds of data are measured to design the unknown controller without any information about the unknown plant. Using the main essence of data-driven control, iterative learning idea is introduced together to yield iterative learning data-driven control strategy. To get the optimal data-driven controller, other factors are considered, for example, adaptation, optimization and learning. After reviewing the aircraft control system in detail, the numerical simulation results have demonstrated the efficiency of the proposed iterative learning data-driven control strategy.

First, considering one closed loop system corresponding to the aircraft control system, data-driven control strategy is used to design the unknown controller without any message about the unknown plant. Second, iterative learning idea is combined with data-driven control to yield iterative learning data-driven control strategy. The optimal data-driven controller is designed by virtue of power spectrum and mathematical optimization. Furthermore, adaptation is tried to combine them together. Third, to achieve the combination with theory and practice, our proposed iterative learning data-driven control is applied into aircraft control system, so that the considered aircraft can fly more promptly.

A novel iterative learning data-driven strategy is proposed to efficiently achieve the combination with theory and practice. First, iterative learning and data-driven control are combined with each other, being dependent of adaptation and optimization. Second, iterative learning data-driven control is proposed to design the flight controller for the aircraft system. Generally, data-driven control is more wide in our living life, so it is important to introduce other fields to improve the performance of data-driven control.

To the best of the authors’ knowledge, this new paper extends the previous contributions about data-driven control by virtue of iterative learning strategy. Specifically, iteration means that the optimal data-driven controller is solved as one recursive form, being related with one gradient descent direction. This novel iterative learning data-driven control has more advanced properties, coming from data driven and adaptive iteration. Furthermore, it is a new subject on applying data-driven control into the aircraft control system.