Search results
1 – 10 of over 1000Chrysoula Pandelidi, Tobias Maconachie, Stuart Bateman, Ingomar Kelbassa, Sebastian Piegert, Martin Leary and Milan Brandt
Fused deposition modelling (FDM) is increasingly being explored as a commercial fabrication method due to its ability to produce net or near-net shape parts directly from a…
Abstract
Purpose
Fused deposition modelling (FDM) is increasingly being explored as a commercial fabrication method due to its ability to produce net or near-net shape parts directly from a computer-aided design model. Other benefits of technology compared to conventional manufacturing include lower cost for short runs, reduced product lead times and rapid product design. High-performance polymers such as polyetherimide, have the potential for FDM fabrication and their high-temperature capabilities provide the potential of expanding the applications of FDM parts in automotive and aerospace industries. However, their relatively high glass transition temperature (215 °C) causes challenges during manufacturing due to the requirement of high-temperature build chambers and controlled cooling rates. The purpose of this study is to investigate the mechanical properties of ULTEM 1010, an unfilled polyetherimide grade.
Design/methodology/approach
In this research, mechanical properties were evaluated through tensile and flexural tests. Analysis of variance was used to determine the significance of process parameters to the mechanical properties of the specimens, their main effects and interactions. The fractured surfaces were analysed by scanning electron microscopy and optical microscopy and porosity was assessed by X-ray microcomputed tomography.
Findings
A range of mean tensile and flexural strengths, 60–94 MPa and 62–151 MPa, respectively, were obtained highlighting the dependence of performance on process parameters and their interactions. The specimens were found to fracture in a brittle manner. The porosity of tensile samples was measured between 0.18% and 1.09% and that of flexural samples between 0.14% and 1.24% depending on the process parameters. The percentage porosity was found to not directly correlate with mechanical performance, rather the location of those pores in the sample.
Originality/value
This analysis quantifies the significance of the effect of each of the examined process parameters has on the mechanical performance of FDM-fabricated specimens. Further, it provides a better understanding of the effect process parameters and their interactions have on the mechanical properties and porosity of FDM-fabricated polyetherimide specimens. Additionally, the fracture surface of the tested specimens is qualitatively assessed.
Details
Keywords
M. Balasubramanian, Thozhuvur Govindaraman Loganathan and R. Srimath
The purpose of this study is to understand the behavior of hybrid bio-composites under varied applications.
Abstract
Purpose
The purpose of this study is to understand the behavior of hybrid bio-composites under varied applications.
Design/methodology/approach
Fabrication methods and material characterization of various hybrid bio-composites are analyzed by studying the tensile, impact, flexural and hardness of the same. The natural fiber is a manufactured group of assembly of big or short bundles of fiber to produce one or more layers of flat sheets. The natural fiber-reinforced composite materials offer a wide range of properties that are suitable for many engineering-related fields like aerospace, automotive areas. The main characteristics of natural fiber composites are durability, low cost, low weight, high specific strength and equally good mechanical properties.
Findings
The tensile properties like tensile strength and tensile modulus of flax/hemp/sisal/Coir/Palmyra fiber-reinforced composites are majorly dependent on the chemical treatment and catalyst usage with fiber. The flexural properties of flax/hemp/sisal/coir/Palmyra are greatly dependent on fiber orientation and fiber length. Impact properties of flax/hemp/sisal/coir/Palmyra are depended on the fiber content, composition and orientation of various fibers.
Originality/value
This study is a review of various research work done on the natural fiber bio-composites exhibiting the factors to be considered for specific load conditions.
Details
Keywords
Russo Swart, Feras Korkees, Peter Dorrington and Joshua Thurman
Composites 3D printing has the potential to replace the conventional manufacturing processes for engineering applications because it allows for the manufacturing of complex shapes…
Abstract
Purpose
Composites 3D printing has the potential to replace the conventional manufacturing processes for engineering applications because it allows for the manufacturing of complex shapes with the possibility of reducing the manufacturing cost. This paper aims to analyse the performance of 3D printed fibre reinforced polymer composites to investigate the energy absorption capabilities and the residual properties before and after impact.
Design/methodology/approach
Various composites composed of carbon fibres and Kevlar fibres embedded into both Onyx and nylon matrix were printed using Markforged-Two 3D printers. Specimens with different fibre orientations and fibre volume fractions (Vf) were printed. A drop-weight impact test was performed at energies of 2, 5, 8 and 10 J. Flexural testing was performed to evaluate the flexural strength, flexural modulus and absorbed energy under bending (AEUB) before and after impact. Additionally, 3D printed carbon fibre composites were tested at two different temperatures to study their behaviour under room and sub-ambient temperatures. Failure modes were investigated using optical and high depth of field microscopes for all 3D printed composite samples.
Findings
Kevlar/nylon composites with a unidirectional lay-up and 50% Vf exhibited the most prominent results for AEUB at room temperature. The high-Vf carbon fibre composite showed the highest ultimate strength and modulus and performed best at both temperature regimes.
Originality/value
The work, findings and testing produced in this paper are entirely original with the objective to provide further understanding of 3D printed composites and its potential for use in many applications.
Details
Keywords
Michael Rosenthal, Markus Rüggeberg, Christian Gerber, Lukas Beyrich and Jeremy Faludi
The purpose of this study is to quantify the vertical shrinkage rates and the mechanical strength of three-dimensional (3D) printed parts for a variety of wood-based materials for…
Abstract
Purpose
The purpose of this study is to quantify the vertical shrinkage rates and the mechanical strength of three-dimensional (3D) printed parts for a variety of wood-based materials for liquid deposition modeling.
Design/methodology/approach
The overall hypothesis was that a well-chosen combination of binders, fibers and fillers could reduce shrinkage in the Z dimension and increase compressive and flexural strength (DIN 52185, 52186). To test this assumption, eight sub-hypotheses were formulated. Mixtures of the ingredients were chosen in different ratios to measure the performance of prints. For time efficiency, an iterative heuristic approach was used – not testing all variations of all variables in even increments, but cutting off lines of testing when mixtures were clearly performing poorly.
Findings
The results showed that some mixtures had high dimensional accuracy and strength, while others had neither, and others had one but not the other. Shrinkage of 3D printed objects was mainly caused by water release during drying. An increase of the wood as well as the cement, sand, salt and gypsum content led to reduced vertical shrinkage, which varied between 0 and 23%. Compressive and flexural strength showed mixed trends. An increase in wood and salt content worsened both strength properties. The addition of fibers improved flexural, and the addition of cement improved compression strength. The highest strength values of 14 MPa for compressive and 8 MPa for flexural strength were obtained in the test series with gypsum.
Originality/value
This paper is an important milestone in the development of environmentally friendly materials for additive manufacturing. The potential of many ingredients to improve physical properties could be demonstrated.
Details
Keywords
Isaac Ferreira, Carolina Melo, Rui Neto, Margarida Machado, Jorge Lino Alves and Sacha Mould
The purpose of this study is to evaluate and compare the mechanical performance of FFF parts when subjected to post processing thermal treatment. Therefore, a study of the…
Abstract
Purpose
The purpose of this study is to evaluate and compare the mechanical performance of FFF parts when subjected to post processing thermal treatment. Therefore, a study of the annealing treatment influence on the mechanical properties was performed. For this, two different types of Nylon (PA12) were used, FX256 and CF15, being the second a short fibre reinforcement version of the first one.
Design/methodology/approach
In this study, tensile and flexural properties of specimens produced via FFF were determined after being annealed at temperatures of 135°C, 150°C or 165°C during 3, 6, 12 or 18 h and compared with the non-treated conditions. Differential scanning calorimetry (DSC) was performed to determine the degree of crystallinity. To evaluate the annealing parameters’ influence on the mechanical properties, a full factorial design of experiments was developed, followed by an analysis of variance, as well as post hoc comparisons, to determine the most significative intervening factors and their effect on the results.
Findings
The results indicate that CF15 increased its tensile modulus, strength, flexural modulus and flexural strength around 11%, while FX256 presented similar values for tensile properties, doubling for flexural results. Flexural strain presented an improvement, indicating an increased interlayer behaviour. Concerning to the DSC analysis, an increase in the degree of crystallinity for all the annealed parts.
Originality/value
Overall, the annealing treatment process cause a significant improvement in the mechanical performance of the material, with the exception of 165°C annealed specimens, in which a decrease of the mechanical properties was observed, resultant of material degradation.
Details
Keywords
Wei Chen, Qiuju Zhang, Ye Yuan, Xiaoyan Chen and Qinghao He
Continuous fiber reinforced thermoplastic composites (CFRTPCs) with great mechanical properties and green recyclability have been widely used in aerospace, transportation, sports…
Abstract
Purpose
Continuous fiber reinforced thermoplastic composites (CFRTPCs) with great mechanical properties and green recyclability have been widely used in aerospace, transportation, sports and leisure products, etc. However, the conventional molding technologies of CFRTPCs, with high cost and low efficiency, limit the property design and broad application of composite materials. The purpose of this paper is to study the effect of the 3D printing process on the integrated rapid manufacturing of CFRTPCs.
Design/methodology/approach
Tensile and flexural simulations and tests were performed on CFRTPCs. The effect of key process parameters on mechanical properties and molding qualities was evaluated individually and mutually to optimize the printing process. The micro morphologies of tensile and flexural breakages of the printed CFRTPCs were observed and analyzed to study the failure mechanism.
Findings
The results proved that the suitable process parameters for great printing qualities and mechanical properties included the glass hot bed with the microporous and solid glue coatings at 60°C and the nozzle temperature at 295°C. The best parameters of the nozzle temperature, layer thickness, feed rate and printing speed for the best elastic modulus and tensile strength were 285°C, 0.5 mm, 6.5r/min and 500 mm/min, respectively, whereas those for the smallest sectional porosity were 305°C, 0.6 mm, 5.5r/min and 550 mm/min, respectively.
Originality/value
This work promises a significant contribution to the improvement of the printing quality and mechanical properties of 3D printed CFRTPCs parts by the optimization of 3D printing processes.
Details
Keywords
Chanun Suwanpreecha and Anchalee Manonukul
The purpose of this paper is to systematically investigate the influence of build orientation on the anisotropic as-printed and as-sintered bending properties of 17-4PH stainless…
Abstract
Purpose
The purpose of this paper is to systematically investigate the influence of build orientation on the anisotropic as-printed and as-sintered bending properties of 17-4PH stainless steel fabricated by metal fused filament fabrication (MFFF).
Design/methodology/approach
The bending properties of 17-4PH alloy fabricated by low-cost additive manufacturing (MFFF) using three build orientations (the Flat, On-edge and Upright orientations) are examined at both as-printed and as-sintered states.
Findings
Unlike tensile testing where the Flat and On-edge orientations provide similar as-sintered tensile properties, the On-edge orientation produces a significantly higher bending strain with a lower bending strength than the Flat orientation. This arises from the printed layer sliding due to the Poisson's effect, which is only observed in the On-edge orientation together with the alternated layers of highly deformed and shifted voids. The bending properties show that the Upright orientation exhibits the lowest bending properties and limited plasticity due to the layer delamination.
Originality/value
This study is the first work to study the effect of build orientation on the flexural properties for MFFF. This work gives insight information into anisotropy in flexural mode for MFFF part design.
Details
Keywords
Swapnil Vyavahare, Soham Teraiya, Deepak Panghal and Shailendra Kumar
Fused deposition modelling (FDM) is the most economical additive manufacturing technique. The purpose of this paper is to describe a detailed review of this technique. Total 211…
Abstract
Purpose
Fused deposition modelling (FDM) is the most economical additive manufacturing technique. The purpose of this paper is to describe a detailed review of this technique. Total 211 research papers published during the past 26 years, that is, from the year 1994 to 2019 are critically reviewed. Based on the literature review, research gaps are identified and the scope for future work is discussed.
Design/methodology/approach
Literature review in the domain of FDM is categorized into five sections – (i) process parameter optimization, (ii) environmental factors affecting the quality of printed parts, (iii) post-production finishing techniques to improve quality of parts, (iv) numerical simulation of process and (iv) recent advances in FDM. Summary of major research work in FDM is presented in tabular form.
Findings
Based on literature review, research gaps are identified and scope of future work in FDM along with roadmap is discussed.
Research limitations/implications
In the present paper, literature related to chemical, electric and magnetic properties of FDM parts made up of various filament feedstock materials is not reviewed.
Originality/value
This is a comprehensive literature review in the domain of FDM focused on identifying the direction for future work to enhance the acceptability of FDM printed parts in industries.
Details
Keywords
Sugavaneswaran M. and Arumaikkannu G.
This paper aims to additive manufacture (AM) the multi-material (MM) structure with directional-specific mechanical properties based on the classical lamination theory of…
Abstract
Purpose
This paper aims to additive manufacture (AM) the multi-material (MM) structure with directional-specific mechanical properties based on the classical lamination theory of composite materials.
Design/methodology/approach
The polyjet three-dimensional printing (3DP) process is used to fabricate the MM structure with directional-specific mechanical properties. MMs within a layer are positioned and oriented based on the classical lamination theory to achieve directional-specific properties. Mechanical behavior of the AM structure was examined under various loading conditions to justify the directional-specific properties.
Findings
With MM processing capabilities of the polyjet 3DP machine, AM MM structures with directional-specific mechanical properties were fabricated. From experimentation, it was observed that the AM MM structure with a quasi-isotropic laminate has superior tensile and flexural strength, and the AM MM structure with an angle ply laminate has superior shear strength. Various mechanical properties determined through testing will be useful for the selection of an appropriate layup arrangement within a structure for appropriate loading conditions.
Originality/value
This study presents the innovative methodology for the fabrication of AM MM structures with tailor-made mechanical properties. The developed methodology paves way for using the polyjet 3DP MM structure for applications such as the complaint mechanism, snap fits and thin features, which require directional-specific properties.
Details
Keywords
J. Elliott Sanders, Lu Wang and Douglas J. Gardner
The purpose of this study was to produce dimensionally accurate and reliable fused layer modeling (FLM) feedstock composed of an impact modified polypropylene matrix, compounded…
Abstract
Purpose
The purpose of this study was to produce dimensionally accurate and reliable fused layer modeling (FLM) feedstock composed of an impact modified polypropylene matrix, compounded with a cellulose nanofiber (CNF) reinforcement and coupled by a maleic anhydride coupling agent to produce comparable mechanical properties in comparison to the industry-standard method of injection molding (IM).
Design/methodology/approach
A spray dried CNF (SDCNF) was compounded with the polymer matrix using a masterbatch method. The composite was diluted with neat polymer and extruded into a filament and then printed into standardized mechanical testing samples. For comparison, the filament was chopped and standardized samples were produced with IM.
Findings
A loss in mechanical properties of up to 30% was observed in FLM samples. If normalized to reflect improved density from a part consolidation method, losses are reduced to 15% or show improvements in the neat polymer matrix.
Originality/value
Limited research has been done on producing FLM feedstock, reporting mechanical property results based on standardized testing and comparing the same material with IM.
Details