Search results

The purpose of this study is to analyze the robot trends of the next generation.

This paper is divided into two sections: the key modern technology on which Europe's robotics industry has built its foundation is described. Then, the next key megatrends were analyzed.

Artificial intelligence (AI) and robotics are technologies of major importance for the development of humanity. This time is mature for the evolution of industrial and service robots. The perception of robot use has changed from threading to aiding. The cost of mass production of technological devices is decreasing, while a rich set of enabling technologies is under development. Soft mechanisms, 5G and AI have enabled us to address a wide range of new problems. Ethics should guide human behavior in addressing this newly available powerful technology in the right direction.

The paper describes the impact of new technology, such as AI and soft robotics. The world of work must react quickly to these epochal changes to enjoy their full benefits.

This paper uses dialectical inquiry to explore tensions that arise when adopting Industry 4.0 technologies in a lean production system and their reconciliation mechanisms.

We conducted an in-depth qualitative case study over a 3-year period on an Italian division of an international electrotechnical organisation that produces electrical switches. This organisation successfully adopted Industry 4.0 technologies in a lean production system. The study is based on primary data such as observations and semi-structured interviews, along with secondary data.

We identify four empirically validated dialectic tensions arising across different Industry 4.0 adoption stages due to managers’ and workers’ contrasting interpretations of technologies. Consequently, we define the related reconciliation mechanisms that allow the effective adoption of various Industry 4.0 technologies to support a lean production system.

This is the first empirical investigation of tensions in the adoption of Industry 4.0 technologies in a lean production system. Furthermore, the paper presents four theoretical propositions and a conceptual model describing which tensions arise during the adoption of Industry 4.0 technologies in a lean production system and the reconciliation mechanisms that prevent lean production system deterioration.

The agri-food industry is experiencing a revolutionary shift due to the introduction of Industry 4.0 technologies to improve efficiency, transparency and sustainability. The importance of agri-food supply chains (AFSC) in promoting sustainability is expanding as the globe struggles with issues including resource scarcity, climate change and population growth. In order to better understand how Industry 4.0 might improve sustainability in a world that is changing quickly, this work aims to focus on identifying various sustainability assessment factors influencing AFSC to increase overall sustainability, minimize resource consumption, cut waste and streamline operations.

Important sustainability assessment factors are identified from the past academic literature and are then validated using the fuzzy-Delphi method. A method called decision-making trial and evaluation laboratory (DEMATEL) is used to examine and analyze structural models with complex causal linkages. The results are then validated using sensitivity analysis.

The factors that emerged as the highest ranked for evaluating the sustainability of Industry 4.0 in AFSC are market competitiveness, and knowledge and skill development, followed by resource efficiency. Industry 4.0 technologies are essential for increasing the marketability of agricultural products because of the major implications of market competitiveness. The significance of knowledge and skill development draws attention to Industry 4.0’s contribution to the promotion of chances for farmers and agricultural employees to increase their capability.

By outlining the nexus between Industry 4.0 technologies and sustainability, the study presents a comprehensive framework that would be relevant for researchers, policymakers and industry stakeholders who want to leverage Industry 4.0 technology to build more sustainable AFSC in the future. The study findings can help the farmers or producers make sensible choices that adhere to sustainability standards and guarantee long-term financial viability.

The originality of this work lies in the identification of sustainability assessment factors especially for AFSC in the era of digitalization which has not been discussed previously.

This paper aims to develop a method based on artificial intelligence capable of predicting the due date (DD) of job shops in real-time, aiming to assist in the decision-making process of industries.

This paper chooses to use the methodological approach Design Science Research (DSR). The DSR aims to build solutions based on technology to solve relevant issues, where its research results from precise methods in the evaluation and construction of the model. The steps of the DSR are identification of the problem and motivation, definition of the solution’s objectives, design and development, demonstration, evaluation of the solution and the communication of results.

Along with this work, it is possible to verify that the proposed method allows greater accuracy in the DD definition forecasts when compared to conventional calculations.

Some limitations of this study can be pointed. It is possible to mention questions related to the tasks to be informed by users, as they could lead to problems in the performance of the artifact as the input data may not be correctly posted due to the misunderstanding of the question by part of the users.

The proposed artifact is a method capable of contributing to the development of the manufacturing industry to improve the forecast of manufacturing dates, assisting in making decisions related to production planning. The use of real production data contributed to creating, demonstrating and evaluating the artifact. This approach was important for developing the method allowing more reliability.

Small and medium-scale enterprises (SMEs) that operate with modest financial investments and commodities face numerous challenges to remain in business. One major philosophy used by SMEs these days is the implementation of lean manufacturing to get solutions for various issues they encounter. But is lean getting sustained over time? The purpose of this research is to design a Sustainable Lean Performance Index (SLPI) to assess the sustainability of lean systems and to pinpoint the variables that might be present as potential lean system inhibitors which hinder the sustainability of leanness.

A multi-level sustainable lean performance model is constructed and presented based on the literature research, field investigation and survey conducted by administering a questionnaire. Fuzzy logic approach is used to analyse the multi-level model.

SLPI for the SMEs is found using fuzzy logic approach. Additionally, the ranking score system is applied to categorise attributes into weak and strong categories. The performance of the current lean system is determined to be “fair” based on the Euclidean distance approach and the SLPI for SMEs.

This work is concentrated only in South India because of the country’s vast geographical area and rich and wide diversity in industrial culture of the nation. Hence, more work can be done incorporating the other parts of the country and can analyse the lean behaviour in a comparative manner.

The generalised sustainable lean model analysed using fuzzy logic identifies the inhibitors and level of performance of SMEs in South India. This can be implemented to find out the level of performance in the SMEs after a deeper study and analysis around the SMEs of the country.

The sustainable assessment of lean parameters in the SMEs of India is found to be very less in literature, and it lacks profundity. The model established in this study assesses the sustainability of the lean methodology adopted in SMEs by considering the lean and sustainability attributes along with enablers like technology, ethics, customer satisfaction and innovation with the aid of fuzzy logic.

This paper aims to overcome the inability of both comparing loss costs and accounting for production resource losses of Overall Equipment Effectiveness (OEE)-related approaches.

The authors conducted a literature review about the studies focusing on approaches combining OEE with monetary units and/or resource issues. The authors developed an approach based on Overall Equipment Cost Loss (OECL), introducing a component for the production resource consumption of a machine. A real case study about a smart multicenter three-spindle machine is used to test the applicability of the approach.

The paper proposes Resource Overall Equipment Cost Loss (ROECL), i.e. a new KPI expressed in monetary units that represents the total cost of losses (including production resource ones) caused by inefficiencies and deviations of the machine or equipment from its optimal operating status occurring over a specific time period. ROECL enables to quantify the variation of the product cost occurring when a machine or equipment changes its health status and to determine the actual product cost for a given production order. In the analysed case study, the most critical production orders showed an actual production cost about 60% higher than the minimal cost possible under the most efficient operating conditions.

The proposed approach may support both production and cost accounting managers during the identification of areas requiring attention and representing opportunities for improvement in terms of availability, performance, quality, and resource losses.

The study aims to explore digital transformation from the viewpoint of human resource management to uncover possible threads of relationship using bibliometric analysis. It also aims to identify the trending research themes within the domains of digital transformation (DT) and human resource management (HRM) collectively.

The research employs a mix of quantitative bibliometric techniques and qualitative content analysis. A corpus of 227 articles retrieved from the Scopus database was analyzed using the R-based Biblioshiny and VOS viewer.

The study shows publication trends, influential authors, leading journals, highly productive institutions, and, countries in the domain of DT and HRM. Co-citation and co-occurrence analysis was undertaken to identify the research clusters, depicting trending research themes that extensively dominate the research under this domain.

This study will serve as a ready reckoner for academicians and business leaders, giving them useful insights to make their road towards digital transformation less challenging with the assistance of human capital.

This study is one of the initial efforts to quantitatively synthesize the results of earlier publications using bibliometric techniques in the domain of DT and HRM together. It will aid researchers in locating research gaps and filling those gaps in the future.

The purpose is to apply the co-workership approach to contribute guidelines for manufacturing managers to exploit the potential of digital technologies through a human-centric perspective.

A longitudinal single case study within manufacturing including a mix of qualitative methods with 18 in-depth interviews and focus groups with 25 participants covering all organizational levels and functions.

Findings demonstrate that to re-interpret manufacturing management through the lens of Industry 5.0 (I5.0), managers need to respond to the call for a more human-centric perspective by focusing on organizational prerequisites, such as holistic understanding, inclusive organizational change, leadership practices, learning and innovation processes.

Limitations due to a single case study are compensated with rich data collected over time with the strengths of mixed methods through in-depth interviews and focus groups with participants reflecting and developing ideas jointly.

Managers’ awareness of organizational prerequisites to promote human perspectives in all functions and at all levels in digital transformation is pivotal. Thus, proposed organizational prerequisites are presented as managers’ guidelines for future innovative manufacturing.

Findings emphasize the need for digital transformation managers to apply a human-centric perspective acknowledging how organizational changes affect the inclusion of employees, and thus challenge culture, structure, communication and trust toward I5.0.

The study contributes to the emerging field of I5.0 by applying an interdisciplinary approach to understand the elusive phenomena of enfolding technology and humans.

The aim of this paper states that total productive maintenance (TPM) is an improvement tool which employs the effective utilization of employees in order to enhance the reliability of the equipment in consideration.

This paper identifies and evaluates the factors accountable for the adoption of TPM methodology in manufacturing organizations. Twenty-four factors affecting the TPM implementation are explored and categorized into five significant categories. Afterwards, these identified TPM factors have been evaluated by using a most popular Multi-criteria decision-making (MCDM) approach namely fuzzy pivot pairwise relative criteria importance assessment (F-PIPRECIA).

In this paper, through application of F-PIPRECIA, “Behavioural factor” is ranked first while “Financial factor” the last. Considering the sub-factors, “Top management support and commitment” is ranked first while “Effective use of performance indices” is ranked the last. A further sensitivity analysis indicates the factors that need higher level of attention.

The result of current research work may be exploited by the top administration of manufacturing enterprises for assessing their TPM adoption status and to recognize the frail links of TPM application and improve accordingly. Moreover, significant factors of TPM can be identified and deploy them successfully in their implementation procedure.

The conclusion obtained from this research enables the management to clearly understand the significance of each considered factor on the adoption of TPM in the organization and hence, provides effective utilization of resources.

The study aims to provide a critical review of the extent to which digital technologies are likely to replace human labour, the exponential rise in the amount of work to be done and how far distinctively human skills are future-proofed and therefore likely to be in short supply. It reviews the evidence for a permanent switch to home and remote working enabled by emerging technologies. It assesses the business, digital and labour strategies of work organisations and the promise and challenges from a dominant trend towards a digitally enabled flexible labour model.

A critical review of 1020 plus case studies and the extant literature was carried out.

The relationship between emerging technologies and work is widely misunderstood, and there are major qualifiers to the idea of an overwhelming tsunami of technology drastically reducing headcounts globally. Distinctive human skills remain valuable, the amount of work to be done is increasing exponentially and automation is becoming more a coping than a labour replacement mechanism. Moves to a hybrid digitalised flexible labour model are promising but not if short-term, and if the challenges they represent are not managed well.

The main limitation is that we are making projections into the future, though we are drawing on a lot of different sources and evidence and past data projected into the future.

The problem is not labour displacement but large skills shortages that will slow down the speed of technology adoption. Skills development is vital, as is the taking of long-term perspectives towards the management of hybrid, flexible working based on human-machine interactions.

Organisations need to revitalise their training and development and labour management models. Governments and intermediary institutions need to manage transition states if the skills required to gain economic growth are to be available, and to ensure that large labour pools do not get bypassed from not having requisite skills.

The study offers a more subtle and complex perspective on the emerging evidence about the future of technology and work.