Search results

To develop a method based on urea/microwave treatment for improving the dyeability of the flax fibre.

The treatment was carried out under a variety of conditions in terms of the power of the microwave, the time of microwave treatment and the use of urea in the treatment solution. The physical chemical properties of the treated flax fibres were characterised using a variety of techniques including scanning electron microscopy (SEM), X‐ray diffractometry, spectrophotometric measurement and tensile measurement.

It was found that the treated flax fibres had significantly improved dyeability. The causes to the improvement of the dyeability of the flax fibre were found to be the increased absorption of dye on the fibre and the increased reaction probability between the dye and the fibre. The procedure for optimum modification appeared to be soaking the flax fabrics in 10 per cent urea solution; treating the fabrics with microwave at 350 W for 2.5 minutes; and treating the fabrics with microwave at 700 W for one minute.

The treatment method developed addressed a problem of great concern in textile coloration, i.e. poor dyeability of flax fibre. The method developed provided a practical and effective solution to such a problem.

The method of treatment of flax fibre, involving soaking in urea and baking in microwave, for the improvement of dyeability was novel. The method could be adapted for use in industrial scale flax dyeing with satisfactory levels of exhaustion and fixation.

The purpose of this paper is to study the optimum culture condition of flax-retting enzyme, and applying the enzyme liquors to retting. In addition to research the structure of flax stem in enzyme retting using scanning electron microscopy (SEM).

The influence of cultural parameters such as moisture level, temperature, incubation time and inoculum size were evaluated with respect to polygalacturonase and xylanase yield. The structure of flax stem was revealed by SEM.

The flax was retted by dilute enzyme liquors (polygalacturonase/25 U/ml, xylanase/1 U/ml), and 24-h retting period was obtained. The SEM studies revealed the removal of a large amount of non-cellulosic gummy material of flax stem in enzyme retting.

First, flax-retting enzyme containing higher-yield polygalacturonase, lower-yield xylanase and no cellulose was yielded by SSF. Second, the composition of enzyme could meet flax retting and no damage cellulosic fibre. Finally, only low-cost wheat bran, citrus peel powder and mineral salt were employed in substrate, which could reduce the overall cost of enzyme production and flax retting.

The purpose of this paper is to develop an environmentally friendly dyeing process using brown pigment from chestnut shells (BPFCS). This material is obtained from foodstuff residues and can make a significant contribution to reusing a reproducible biomass resource, economizing petroleum, avoiding water pollution and protecting human health.

The brown pigment is extracted from the raw material and purified with solvents containing 30 and 100 per cent EtOH. It is then used to dye flax fabric in aqueous solution with added NaCl as a dye accelerator. The effects of dyeing conditions and fastness are investigated. The pigment, and the pristine and dyed fabrics are analysed by Fourier‐transform infrared spectroscopy (FT‐IR) and the fabric samples are observed using a scanning electron microscope (SEM). Fastness to washing, rubbing and light are also measured.

BPFCS show promising dyeability on cellulosic fibers. White flax fabric is successfully dyed with the pigment to a yellow‐brown colour. The base dyeing conditions are as follows: pigment concentration 16 g/l, NaCl concentration 10 g/l, liquor ratio 10:1, temperature 95°C, dyeing time 40 min. The dyed fabrics have lower fastness to washing and higher fastness to rubbing and light. A total of 4 per cent Al³⁺ or Fe²⁺ treatment of dyed fabric can improve fastness to washing, but decrease fastness to rubbing. The yellowish‐brown samples are transformed to brown or dark‐green after Al³⁺ or Fe²⁺ treatment, respectively. The pigment is a mixture with abundant hydroxyl groups.

The studies of dyeing conditions and fastness are carried out in detail as BPFCS used as a dye. However, a qualitative analysis of the pigment could not be performed due to the difficulty of separating the mixture. The BPFCS used in this paper can dye cellulosic fiber and can also be used to dye other fibers such as silk, wool and PET. Dyeing conditions for these other fibers need to be investigated.

BPFCS may play an important role in the dyeing industries because of its good dyeability, lack of toxicity and resistance to water, rubbing and light. The present work offers an environmentally friendly dye and a simple dyeing method.

At present, no report exists in the literature of work on dyeing flax fabric with BPFCS. This paper represents a preliminary study to determine the relationships of dyeing conditions to fastness and the role of mordant. BPFCS appears to be a new and practically useful natural dye.

The purpose of this study is to understand the behavior of hybrid bio-composites under varied applications.

Fabrication methods and material characterization of various hybrid bio-composites are analyzed by studying the tensile, impact, flexural and hardness of the same. The natural fiber is a manufactured group of assembly of big or short bundles of fiber to produce one or more layers of flat sheets. The natural fiber-reinforced composite materials offer a wide range of properties that are suitable for many engineering-related fields like aerospace, automotive areas. The main characteristics of natural fiber composites are durability, low cost, low weight, high specific strength and equally good mechanical properties.

The tensile properties like tensile strength and tensile modulus of flax/hemp/sisal/Coir/Palmyra fiber-reinforced composites are majorly dependent on the chemical treatment and catalyst usage with fiber. The flexural properties of flax/hemp/sisal/coir/Palmyra are greatly dependent on fiber orientation and fiber length. Impact properties of flax/hemp/sisal/coir/Palmyra are depended on the fiber content, composition and orientation of various fibers.

This study is a review of various research work done on the natural fiber bio-composites exhibiting the factors to be considered for specific load conditions.

This paper aims to investigate the current state of biocomposites used in fused deposition modelling (FDM) with a focus on their mechanical characteristics.

The study presents a variety of biocomposite materials that have been used in filaments for 3D printing by different researchers. The process of making filaments is then described, followed by a discussion of the process parameters associated with the FDM.

To achieve better mechanical properties of 3D-printed parts, it is essential to optimize the process parameters of FDM while considering the characteristics of the biocomposite material. Polylactic acid is considered the most promising matrix material due to its biodegradability and lower cost. Moreover, the use of natural fibres like hemp, flax and sugarcane bagasse as reinforcement to the polymer in FDM filaments improves the mechanical performance of printed parts.

The paper discusses the influence of critical process parameters of FDM like raster angle, layer thickness, infill density, infill pattern and extruder temperature on the mechanical properties of 3D-printed biocomposite.

Building the relationship between retting termination and pectin content remained in the fiber is crucial for ensuring the identity quality of retted flax. In order to measure the pectin content, pectin must be removed thoroughly from the fiber. The purpose of this paper is to find the most suitable method to extract pectin from flax phloem fiber.

Methods of extracting pectin from fruits were employed to ensure the complete removal of pectin from flax for the first time, including extraction with ethylene diamine tetraacetic acid, hydrochloric acid and ion exchange resin. Traditional ammonium oxalate-KOH method was adopted as control. Each procedure was optimized according to the yield of pectin. A characteristic chromogenic technique for determining the exact pectin amount was used, which ensured the precise measurement of pectin extracted.

Results showed that comparing with the traditional ammonium oxalate-KOH method, methods of hydrochloric acid and ion exchange resin extract >95 percent (w/w) pectin and the extract conditions are much milder.

Bulk of literatures have covered the problem of how to define the quality of retted flax. But the flax industry in China still uses sensory method to check the retting termination. Connect the fiber quality with pectin content is a brand new idea. Also, the exaction method employed from fruit pectin extract is applied in flax pectin for the first time. These methods are essential for building the relationship between the pectin content and retting termination and also significant for discovering the suitable enzyme for enzyme retting.

This paper aims to report the effect of titanium oxide (TiO₂) particles on the specific wear rate (SWR) of alkaline treated bamboo and flax fiber-reinforced composites (FRCs) under dry sliding condition by using a robust statistical method.

In this research, the epoxy/bamboo and epoxy/flax composites filled with 0–8 Wt.% TiO₂ particles have been fabricated using simple hand layup techniques, and wear testing of the composite was done in accordance with the ASTM G99-05 standard. The Taguchi design of experiments (DOE) was used to conduct a statistical analysis of experimental wear results. An analysis of variance (ANOVA) was conducted to identify significant control factors affecting SWR under dry sliding conditions. Taguchi prediction model is also developed to verify the correlation between the test parameters and performance output.

The research study reveals that TiO₂ filler particles in the epoxy/bamboo and epoxy/flax composite will improve the tribological properties of the developed composites. Statistical analysis of SWR concludes that normal load is the most influencing factor, followed by sliding distance, Wt.% TiO2 filler and sliding velocity. ANOVA concludes that normal load has the maximum effect of 31.92% and 35.77% and Wt.% of TiO2 filler has the effect of 17.33% and 16.98%, respectively, on the SWR of bamboo and flax FRCs. A fairly good agreement between the Taguchi predictive model and experimental results is obtained.

This research paper attempts to include both TiO₂ filler and bamboo/flax fibers to develop a novel hybrid composite material. TiO₂ micro and nanoparticles are promising filler materials, it helps to enhance the mechanical and tribological properties of the epoxy composites. Taguchi DOE and ANOVA used for statistical analysis serve as guidelines for academicians and practitioners on how to best optimize the control variable with particular reference to natural FRCs.

Composites based on fiber are commonly used in high-performance building materials. The composites mostly use petrochemically derived fibers like polyester and e-glass, due to their advantageous material features like high stiffness and strength. All the same, these fibers also have important shortcomings related to energy consumption, recyclability, initial processing expense, resulting health hazards, and sustainability. Increasing environmental awareness and new sustainable building technologies are driving the research, development, and usage of “green” building materials, especially the development of biomaterials.

In this chapter, the natural fiber evaluation approach is applied, which covers a diverse set of criteria. Consequently, the comparative assessment of diverse natural fiber types is applied through the use of an expert decision system approach. The best performing fiber choice is made by comparatively evaluating the materials related to green building. The proposed fiber can be used and applied by green building material manufacturing companies in various countries or locations as a reference when selecting the fiber with the best performance.

The study aims to review the literatures on the effect of fiber length on the mechanical response of natural fiber composite will help the researchers to know about the perspective of the various natural fibers in making of composite concerning fiber length. The review summarized the work of the other researchers, thereby unambiguously précised suitability of a specific natural fiber for a matrix in use. Thus, one can identify the use of the same fibers–matrix combination to obtain composites with different properties with the control of fiber/matrix interface.

The review work proposes a new kind of diagrammatic representation that expresses the influence of fiber length. This work has not been explored before in this specific format. The chronology of work may help to select natural fibers for use in composites for a specific matrix.

The length of the fiber perception in terms of “critical” length decides the need for pre-treatment process of natural fiber to improve shear stress at the interface for various matrices.

The current review paper attempts to shed light on the association between the fiber length of natural fiber and the mechanical response of natural fiber composite. Moreover, it probes the concepts of critical fiber length as a persuadable factor.