Search results

1 – 7 of 7
Article
Publication date: 28 October 2020

Fernanda Rodrigues, Flávio Antunes and Raquel Matos

The use of building information modelling (BIM) methodology has been increasing in the architecture, engineering, construction and operation sector, driven to a new paradigm of…

Abstract

Purpose

The use of building information modelling (BIM) methodology has been increasing in the architecture, engineering, construction and operation sector, driven to a new paradigm of work with the use of three-dimensional (3D) parametric models. However, building information modelling (BIM) has been mostly used for as-built models of a building, not yet been widely used by designers during project and construction phases for occupational risks prevention and safety planning. This paper aims to show the capacity of developing tools that allow adding functionalities to Revit software to improve safety procedures and reduce the time spent on modelling them during the design phase.

Design/methodology/approach

To reach this objective, a structural 3D model of a building is used to validate the developed tools. A plugin prototype based on legal regulations was developed, allowing qualitative safety assessment through the application of job hazard analysis (JHA), SafeObject and checklists. These tools allow the automated detection of falls from height situations and the automated placement of the correspondent safety systems.

Findings

Revit application programming interface allowed the conception and addition of several functionalities that can be used in BIM methodology, and more specifically in the prevention of occupational risks in construction, contributing this paper to the application of a new approach to the prevention through design.

Originality/value

This paper is innovative and important because the developed plugins allowed: automated detection of potential falls from heights in the design stage; automated introduction of safety objects from a BIM Safety Objects Library; and the intercommunication between a BIM model and a safety database, bringing JHA integration directly on the project. The prototype of this work was validated for fall from height hazards but can be extended to other potentials hazards since the initial design stage.

Article
Publication date: 22 May 2009

Flavio Cesar Faria Fernandes, Moacir Godinho Filho and Maurice Bonney

The purpose of this paper is to present a practical proposal for integrating production control (PC) and quality control (QC) at the shop floor level.

2348

Abstract

Purpose

The purpose of this paper is to present a practical proposal for integrating production control (PC) and quality control (QC) at the shop floor level.

Design/methodology/approach

The proposed method is based on three principles which relate PC and QC at the shop floor level. The proposal is applied successfully at the world's largest pencil factory.

Findings

The results show that the proposed method contributes to improve four performance indicators related to PC and QC at the company studied: increase the average throughput in about 28.9 per cent; reduce the average value of work in process (WIP) in about 35.6 per cent, reduce the average lead time by about 45.4 per cent, and reduce the average defect rate by about 71.4 per cent.

Research limitations/implications

The proposal (mainly because of principle III) is developed to be applied in repetitive production (RP) systems, i.e. environments characterized by low production volume and low product variety.

Practical implications

Some practical implications for industrial managers arises from this study: managers must consider the importance of integrated PC and QC functions in order to get better results concerning performance indicators such as throughput, WIP, lead time, and rejection rate; the materials flow simplification is a prerequisite for a lot of improvement initiatives at the shop floor level; the adequate choice of the production control system (PCS) is vital in order to get positive results regarding the performance indicators related to PC; the determination of the production pace (or rate) for a RP system must take account capacity restrictions and the influence of defect rate on production rate.

Originality/value

The paper is original in that it shows that the performance of the shop floor level can be improved by means of integrating PC and QC, by discussing and implementing a method which simplifies the material flow in the shop floor level, chooses the most adequate PCS and shows how the production rate influence on the rejection rate. Therefore, the paper is important for those which practice industrial management, more specifically on PC and QC functions.

Details

Industrial Management & Data Systems, vol. 109 no. 5
Type: Research Article
ISSN: 0263-5577

Keywords

Article
Publication date: 4 November 2020

Leandro Reis Muniz, Samuel Vieira Conceição, Lásara Fabrícia Rodrigues, João Flávio de Freitas Almeida and Tãssia Bolotari Affonso

The purpose of this paper is to present a new hybrid approach based on criticality analysis and optimisation to deal with spare parts inventory management in the initial…

1511

Abstract

Purpose

The purpose of this paper is to present a new hybrid approach based on criticality analysis and optimisation to deal with spare parts inventory management in the initial provisioning phase in the mining industry. Spare parts represent a significant part of mining companies' expenditures, so it is important to develop new approaches to reduce the total inventory value of these items.

Design/methodology/approach

This hybrid approach combines qualitative and quantitative methods based on VED (vital, essential and desirable) analysis, analytical hierarchical process (AHP), and e-constraint optimisation method to obtain the spare parts to be stocked. The study was applied to a large mining company. The mineral sector was chosen due to the great importance to the emerging Brazilian economy and the lack of researches in this sector. In addition, the spare parts have a relevant weight on the total inventory cost.

Findings

Present a novel approach combining multi-objective optimisation and multi-criteria evaluation approaches to tackle the inventory decision in spare parts management. This work also defines and classifies relevant criteria for spare parts management in the mineral sector validated by specialists. The proposed approach achieves an average increase of 20.2% in the criticality and 16.6% in the number of items to be stocked compared to the historical data of the surveyed company.

Research limitations/implications

This paper applies the proposed approach to a mining company in Brazil. Future research in other companies or regions should analyse the adequacy of the criticality criteria, hierarchy and weights adopted in this paper.

Practical implications

The proposed approach is useful for mining industries that deal with a large variety of resource constraints as it helps in formulating appropriate spare part strategies to rationalise financial resources at both tactical and strategic levels.

Originality/value

The paper presents a new hybrid method combining the AHP a multi-criteria decision making (MCDM) approach coupled with e-constraint optimisation to deal with spare parts inventory management allowing for a better spare parts inventory analysis in the initial provisioning phase and providing managers with a systematic tool to analyse the trade-off between spare parts criticality and total inventory value.

Details

The International Journal of Logistics Management, vol. 32 no. 1
Type: Research Article
ISSN: 0957-4093

Keywords

Open Access
Article
Publication date: 6 July 2021

Antonio Lopo Martinez and Flávio Alves de Carvalho

This study examines whether Brazilian health insurance companies (HICs) engage in earnings management through discretionary accruals or operational decisions by refraining from…

1912

Abstract

Purpose

This study examines whether Brazilian health insurance companies (HICs) engage in earnings management through discretionary accruals or operational decisions by refraining from reporting a low indicator of sustainability in the market (IDSM).

Design/methodology/approach

The study used the Jones and Modified Jones models to identify earnings management through discretionary accruals and used the model described by Roychowdhury to estimate the abnormal behaviors of operational decisions. Data covering 2012 to 2018 were collected from the ANS website.

Findings

The results show that HICs engaged in earnings management to avoid reporting a low IDSM. The findings should help health insurance clients make decisions regarding the purchase or change of health insurance. The findings should also encourage regulators to improve their evaluation of the economic and financial risks around HICs.

Originality/value

The National Agency of Supplementary Health (ANS) established a qualification program for HICs, monitoring them based on a set of indicators. Managers may have an incentive to use earnings management to obtain indices that meet the requirements of the ANS qualification program in order to avoid showing signs of abnormality.

研究目的

本研究旨在探討巴西的醫療保險公司,透過避免報導低的市場可持續性指標,是以裁決性應計,抑或是以操作決策來進行盈餘管理。

研究的原創性

國立輔助醫療辦事處 (註:此為直譯)(The National Agency of Supplementary Health)為醫療保險公司建立了一個資格檢定機制,基於一套指標來監管這些公司。公司主管或會有鼓勵性的誘因去使用盈餘管理來取得符合國立輔助醫療辦事處資格檢定機制所要求的指標,從而避免顯示異常的跡象。

研究設計/方法/理念

本研究使用Jones 模型及Modified Jones模型,透過裁決性應計來辨認盈餘管理,研究亦使用羅伊喬杜里 (Roychowdhury) 描述的模型, 來估計操作決策的異常行為。數據取自國立輔助醫療辦事處的網址,並涵蓋2012年至2018年期間。

研究結果

研究結果顯示,醫療保險公司進行盈餘管理,以求避免報導低的市場可持續性指標。研究結果應可幫助醫療保險客戶在購買或更改醫療保險時作適當的決定。研究結果亦可鼓勵監管者改善他們對醫療保險公司的經濟及財務風險所作的評估。

Details

European Journal of Management and Business Economics, vol. 31 no. 4
Type: Research Article
ISSN: 2444-8451

Keywords

Article
Publication date: 26 June 2019

Barbara Galleli, Flavio Hourneaux Jr and Luciano Munck

The purpose of this paper is to identify and discuss human competences required for sustainability management in organisations.

1461

Abstract

Purpose

The purpose of this paper is to identify and discuss human competences required for sustainability management in organisations.

Design/methodology/approach

The research is based on a systematic review of the literature, through qualitative thematic analysis.

Findings

The research covered 15 years of scientific publications and was summarised in 43 articles. It revealed that education, more than management, was the field of knowledge with more references in human competences, through exploratory methodological approaches. The competences found were plenty, but there is still some misunderstanding regarding their conceptual and theoretical bases.

Research limitations/implications

This research provides evidence that the academic knowledge on the subject is still at its initial stage, and it exposes the debility of the management area in addressing the subject.

Practical implications

The authors intend to indicate to managers some fundamentals for the adoption of human competences for sustainability aiming at a more sustainable performance in organisations.

Social implications

The results may instigate studies concerning the fit of sustainability competences developed on higher education institutions and the job market. From it, curricula and pedagogical projects can be proposed and revised with better alignment to the organisational context.

Originality/value

This paper presents a theoretical contribution by building bridges among different perspectives and fields of knowledge on the topic. The paper also offers a managerial contribution by stimulating practical discussions to develop sustainability in organisations through individuals.

Details

Benchmarking: An International Journal, vol. 27 no. 7
Type: Research Article
ISSN: 1463-5771

Keywords

Abstract

Details

International Journal of Entrepreneurial Behavior & Research, vol. 28 no. 8
Type: Research Article
ISSN: 1355-2554

Article
Publication date: 19 July 2022

Victor Silva Corrêa, Marina de Almeida Cruz, Vânia Maria Jorge Nassif, Pedro Lucas de Resende Melo and Rosileine Mendonça de Lima

Embeddedness has gained prominence in entrepreneurship studies. However, the notion that the embeddedness metaphor relates to “market” structures prevails in studies in the area…

Abstract

Purpose

Embeddedness has gained prominence in entrepreneurship studies. However, the notion that the embeddedness metaphor relates to “market” structures prevails in studies in the area. Entrepreneurship scholars still know little about whether entrepreneurs are eventually embedded in other structures whose relationships go beyond the restricted dimension of the interested actor’s assumption. This study aims to propose investigating the social structures in which a specific type of entrepreneurship, the religious one, is embedded.

Design/methodology/approach

The research was qualitative, using interviews as an evidence collection instrument. A total of 17 entrepreneur-pastors responsible for business churches in Brazil and eight parishioners took part in the study.

Findings

Religious entrepreneurs are embedded in market structures, corroborating a perspective that associates embeddedness with the utilitarian notion. At the same time, entrepreneurs are embedded in two other social structures: reciprocity and redistribution.

Practical implications

This article emphasizes the relevance of going beyond the predominant perspective associated with the utilitarian and rationalized understanding of embeddedness in relationship networks.

Originality/value

This study makes essential contributions. Initially, it attests to the utilitarian perspective of Granovetter’s embeddedness while suggesting incorporating two other dimensions into the metaphor. By highlighting this, this article stresses the need to reinterpret the metaphor of embeddedness and how entrepreneurship scholars use it. Further, by emphasizing the need to consider embeddedness in networks beyond its still utilitarian perspective, this paper highlights unexplored opportunities for entrepreneurship scholars.

Details

Journal of Entrepreneurship in Emerging Economies, vol. 16 no. 2
Type: Research Article
ISSN: 2053-4604

Keywords

1 – 7 of 7