Search results

This study aims to introduce the design and the design process for an innovative sanitary fixture to be used in public facilities for the purpose of ablution. This purpose-made fixture is needed to support the hygienic, safe and comfortable performance of this essential function in public facilities in many parts of the world. The study also clarifies the need for this function and critically reviews current designs to address it.

The study started by critically reviewing the standard built-in models for ablution. It also identified and analyzed new approaches to designing standalone ablution fixtures. The study then specified the characteristics of a better ablution fixture and involved drafting a design based on these characteristics, making a wooden prototype to test the design and receiving users’ feedback. The design was adjusted and tested again for more feedback. Finally, the study resulted in the development of a final design. It used digital fabrication to create the design prototype with improved aesthetics, tested it again and received user feedback.

A survey of users showed that they found the innovative fixture more comfortable and safer than the commonly used built-in models. The main concern was the potential for water to splash on clothes from the high faucet.

In addition to showing an innovative design for a purpose-made sanitary fixture for ablution, the study makes the reader aware of the various challenges of providing a hygienic, safe and comfortable facility for users to perform this function. This is very useful for the many designers and facility managers who deal with the issue.

This study aims to comprehensively investigate the mixed-mode fracture behavior and mechanical properties of selective laser sintering (SLS) polyamide 12 (PA12) components, considering different build orientations and layer thicknesses. The primary objectives include the following. Conducting mixed-mode fracture and mechanical analyses on SLS PA12 parts. Investigating the influence of build orientation and layer thickness on the mechanical properties of SLS-printed components. Examining the fracture mechanisms of SLS-produced Arcan fracture and tensile specimens through experimental methods and finite element analyses.

The research used a combination of experimental techniques and numerical analyses. Tensile and Arcan fracture specimens were fabricated using the SLS process with varying build orientations (X, X–Y, Z) and layer thicknesses (0.1 mm, 0.2 mm). Mechanical properties, including tensile strength, modulus of elasticity and critical stress intensity factor, were quantified through experimental testing. Mixed-mode fracture tests were conducted using a specialized fixture, and finite element analyses using the J-integral method were performed to calculate fracture toughness. Scanning electron microscopy (SEM) was used for detailed morphological analysis of fractured surfaces.

The investigation revealed that the highest tensile properties were achieved in samples fabricated horizontally in the X orientation with a layer thickness of 0.1 mm. Additionally, parts manufactured with a layer thickness of 0.2 mm exhibited favorable mixed-mode fracture behavior. The results emphasize the significance of build orientation and layer thickness in influencing mechanical properties and fracture behavior. SEM analysis provided valuable insights into the failure mechanisms of SLS-produced PA12 components.

This study contributes to the field of additive manufacturing by providing a comprehensive analysis of the mixed-mode fracture behavior and mechanical properties of SLS-produced PA12 components. The investigation offers novel insights into the influence of build orientation and layer thickness on the performance of such components. The combination of experimental testing, numerical analyses and SEM morphological observations enhances the understanding of fracture behavior in additive manufacturing processes. The findings contribute to optimizing the design and manufacturing of high-quality PA12 components using SLS technology.

The Furniture, Fixture and Equipment (FFE) sector is well placed to leverage virtual reality (VR) technology for competitive and operational advantages; however, the diffusion of VR applications in this sector has followed a steep curve. This study reports on the implementation of two novel VR applications in the FFE sector and also investigates the challenges and benefits associated with their use and adaptability.

A sequential exploratory mixed research methodology consisting of three phases was adopted for this study. This included identification of factors that affect/facilitate the implementation of VR (Challenges and Benefits) using experiments during in-house prototyping of VR applications, a rigorous literature review and questionnaire survey to solicit FFE Stakeholder's (n = 117) opinion on the utility and usefulness of the proposed applications and to the understand factors that facilitate and inhibit their implementation in FFE's context, particularly as a design communication and coordination tool.

The findings of this study revealed that distributed and single-user VR has become essential to digitalising the FFE sector's design communication with improved design communication being regarded as the most important benefit of its use. Conversely, the most critical challenge that inhibits the implementation of these two VR applications in the FFE sector is the perceived cost.

This study provides valuable insight to FFE's stakeholders to devise action plans to mitigate myriad complex and interrelated factors that affect the adoption of virtual reality technology in the FFE sector that are otherwise very hard to understand, and the consequential implementation of any mitigation plans cannot be devised.

The purpose of this paper is to use a wear test to determine the effect of sand on the wear rates of materials typically used in aerospace applications. Once a repeatable wear test has been established, it can be used to test any combination of materials or coatings. The effectiveness of several different test methods will also be evaluated, including the sample height, surface roughness and mass difference. In addition, the current work will observe the differences between applying sand before the samples are brought into contact or after. The wear rates obtained from these tests could also be used to predict the wear of other components in similar abrasive particulate environments.

A modified block-on-flat wear test of anodized aluminum on hard coat anodized aluminum was used to study this. The experiments were performed with and without sand to study the effects of the sand. Two methods of adding sand were also evaluated. Weighing and profilometry were used to study the differences between the tests.

Wear rates have been calculated based on both the change in the masses of the samples and the change in the height between the upper and lower samples over the course of each test. The wear rates from the change in the masses are repeatable with and without sand, but the results for the change in height show no repeatability without sand. In addition, only in the presence of sand do the trends for the two methods agree. The wear rate was found to be non-linear as a function of load and therefore not in agreement with Archard’s Wear Law. The wear rate also increased significantly when sand was present in the contact for the duration of the test. The sand appears to change the wear mechanism from an adhesive to an abrasive mechanism. Black wear particles formed both when there was sand and when there was not sand. The source of these particles has been investigated but not determined.

This work has not been previously published and is the original work of the authors.

The learning outcomes of the study are to analyze the launch of a new business line for Trend at the commercial and market levels; identify the potential of the green consumer in Peruvian emerging market; and apply strategic tools to analyze the viability of launching a new business line in a new market.

José Luis Galindo planned to launch a new line of toilets in the Peruvian market called EcoTrend, based on the analysis of the responsible consumption trend and the presence of a new green consumer. Therefore, he carried out a series of studies and estimates to define the feasibility of the value proposition of his ecological toilet. However, Galindo doubted if these studies and estimates were enough to carry out the launch and commercial success of the EcoTrend line. Galindo, founder and current general manager of a company called Cerámica Industrial Trend S.A.C, is broadly knowledgeable about the construction sector in Peru and has more than 30 years of work experience in the ceramic bathroom fixtures industry. Throughout his professional career, Galindo has managed three of the leading bathroom fixture companies in Peru. However, it was when he started Trend, a company focusing specifically on the manufacture of toilets, that his dream of becoming an entrepreneur came true. Trend is focused on its one-piece toilet line. These toilets are characterized by their high-quality workmanship, which is achieved through the efficient and distinctive production process of Trend’s workforce. The workforce stays on its toes due to constant, thorough training, a key to Trend’s market competitiveness. In addition, the new EcoTrend line sowed in Galindo uncertainty in the commercial viability because the product was new in the market and was going to bring a great challenge.

Depending on the scope of the course, different teaching objectives could be oriented toward entrepreneurship, management sciences, strategy and green marketing. The case can be used to teach higher level undergraduate marketing and management courses.

Teaching notes are available for educators only.

CSS 8: Marketing.

This paper highlights a crucial public safety issue due to falling objects from tall residential buildings in Singapore. A systematic façade inspection regime and a system of evaluation of severity for the detection and assessment of potential falling objects from tall buildings are presented.

The research uses qualitative case study approach with 450 tall residential buildings sampled for the study. The common materials, elements, components with high risk of falling objects, the nature and type of the falling, the critical factors affecting the falling, the respective level of severity, and the effectiveness of various diagnostic techniques and protocols, are summarised.

Façade for tall residential buildings in Singapore comprises mainly cementitious materials cast in situ or precast, with fixtures and architectural features, all of which have potential of falling. The common anomalies arising from each material and fixture/features are identified, the causes evaluated and their implications to future design, construction and maintenance analysed.

This study provides original and significant information to a crucial public safety issue, setting design and construction criteria that will serve as a benchmark for new and existing facades, applicable to all cities dominated by tall buildings. The paper presents original figures, checklists and guides as a basis for readers' consideration to use according to their respective unique conditions.

The design of buildings is crucial to functionality and safety for senior citizens. People often refrain from talking about old age and its related support; however, it is inevitable. The paper aims to highlight the essentials of a home design that considers the aged citizens in Nigeria.

A qualitative research technique is used in the study. A closed-ended questionnaire and an interview were used to gather information on the requirements for aging-in-place basics in home design from middle-aged and elderly households.

Findings from the study revealed that a majority of the respondents considered old age as a phase of life to prioritize in home design. Lighting, furniture and fixtures and electrical installations are variously perceived by the respondents as aging-in-place essentials.

The study has far-reaching consequences for the built environment, particularly for homeowners. It is related to the third sustainable development goal (SDG), which seeks to secure the health and well-being of people of all ages.

The study's uniqueness and usefulness are highlighted in the gaps between present house design culture and the reality of senior citizen occupants' dwellings, as well as the appropriateness to satisfy changing demands associated with old age. It would encourage homes to develop the culture and duty of providing a sustainable home that is accessible to everybody and provides emotional and physical safety for the elderly.

The present study investigates the mechanical properties of three types of Ti6Al4V ELI bone screws realized using the laser powder bed fusion (LPBF) process: a fully threaded screw and two groups containing differently arranged sectors made of lattice-based Voronoi (LBV) structure in a longitudinal and transversal position, respectively. This study aims to explore the potentialities related to the introduction of LBV structure and assess its impact on the implant’s primary stability and mechanical performance.

The optimized bone screw designs were realized using the LPBF process. The quality and integrity of the specimens were assessed by scanning electron microscopy and micro-computed tomography. Primary stability was experimentally verified by the insertion and removal of the screws in standard polyurethane foam blocks. Finally, torsional tests were carried out to compare and assess the mechanical strength of the different designs.

The introduction of the LBV structure decreases the elastic modulus of the implant. Longitudinal LBV type screws demonstrated the lowest insertion torque (associated with lower bone damage) while still displaying promising torsional strength and removal force compared with full-thread screws. The use of LBV structure can promote improved functional performances with respect to the reference thread, enabling the use of lattice structures in the biomedical sector.

The paper fulfils an identified interest in designing customized implants with improved primary stability and promising features for secondary stability.

Most residential building owners often report problems associated with the plumbing systems. If identified at the early stages, plumbing-related defects can be easily repaired. However, if unnoticed for a long period of time, they could lead to major damages and incur a significant cost to repair. Despite the problems, studies investigating plumbing anomalies and their root causes in residential buildings are limited. This study aims to explore plumbing defects and their potential causes, diagnosis methods and repair techniques in residential buildings.

This research used data collected through an extensive survey of both academic and grey literature. Through the content analysis, plumbing defects and the associated causes have been identified and presented in tabular format.

The study investigated the anomalies and causes in the residential plumbing system under five key sub-systems: water supply system; sanitary plumbing system; roof drainage system; heating, ventilation, air conditioning and gas system; and swimming pool. Accordingly, some of the identified plumbing defects include leakages, corrosion, water penetration, slow drainage and cracks. Damaged pipes, faulty equipment and installations are some of the common causes of the anomalies. Visual inspection, hydrostatic pressure test, thermography, high-tech pipe cameras, infrared cameras, leak noise correlators and leak loggers are techniques used for diagnosing anomalies. Reactive, preventive, predictive and reliability-centred maintenance strategies are identified to control or prevent anomalies.

The findings of this research can be used as a useful tool or guideline for contractors, plumbers, facilities managers and building surveyors to identify and rectify plumbing system-related defects in residential buildings.

Three-dimensional (3D) printed parts usually have poor surface quality due to layer manufacturing’s “stair casing/stair-stepping”. So post-processing is typically needed to enhance its capabilities to be used in closed tolerance applications. This study aims to examine abrasive flow finishing for 3D printed polylactic acid (PLA) parts.

A new eco-friendly abrasive flow machining media (EFAFM) was developed, using paper pulp as a base material, waste vegetable oil as a liquid synthesizer and natural additives such as glycine to finish 3D printed parts. Characterization of the media was conducted through thermogravimetric analysis and Fourier transform infrared spectroscopy. PLA crescent prism parts were produced via fused deposition modelling (FDM) and finished using AFM, with experiments designed using central composite design (CCD). The impact of process parameters, including media viscosity, extrusion pressure, layer thickness and finishing time, on percentage improvement in surface roughness (%ΔRa) and material removal rate were analysed. Artificial neural network (ANN) and improved grey wolf optimizer (IGWO) were used for data modelling and optimization, respectively.

The abrasive media developed was effective for finishing FDM printed parts using AFM, with SEM images and 3D surface profile showing a significant improvement in surface topography. Optimal solutions were obtained using the ANN-IGWO approach. EFAFM was found to be a promising method for improving finishing quality on FDM 3D printed parts.

The present study is focused on finishing FDM printed crescent prism parts using AFM. Future research may be done on more complex shapes and could explore the impact of different materials, such as thermoplastics and composites for different applications. Also, implication of other techniques, such as chemical vapour smoothing, mechanical polishing may be explored.

In the biomedical field, the use of 3D printing has revolutionized the way in which medical devices, implants and prosthetics are designed and manufactured. The biodegradable and biocompatible properties of PLA make it an ideal material for use in biomedical applications, such as the fabrication of surgical guides, dental models and tissue engineering scaffolds. The ability to finish PLA 3D printed parts using AFM can improve their biocompatibility, making them more suitable for use in the human body. The improved surface quality of 3D printed parts can also facilitate their sterilization, which is critical in the biomedical field.

The use of eco-friendly abrasive flow finishing for 3D printed parts can have a positive impact on the environment by reducing waste and promoting sustainable manufacturing practices. Additionally, it can improve the quality and functionality of 3D printed products, leading to better performance and longer lifespans. This can have broader economic and societal benefits.

This AFM media constituents are paper pulp, waste vegetable oil, silicon carbide as abrasive and the mixture of “Aloe Barbadensis Mill” – “Cyamopsis Tetragonoloba” powder and glycine. This media was then used to finish 3D printed PLA crescent prism parts. The study also used an IGWO to optimize experimental data that had been modelled using an ANN.