Search results
1 – 10 of 505Hajer Rebai, Imen Abdennadher and Ahmed Masmoudi
The purpose of this paper is to deal with several approach to recover the torque production capability of a five phase double-layer fractional-slot PM machine under faulty…
Abstract
Purpose
The purpose of this paper is to deal with several approach to recover the torque production capability of a five phase double-layer fractional-slot PM machine under faulty operation. The considered fault is an open-circuit coil in a given phase.
Design/methodology/approach
In a first step, the mean futures, such as the phase back-EMFs and the electromagnetic torque, are computed by finite element analysis under healthy operation, and are taken as references. Then, they are investigated, under a faulty coil, for different approaches to recover the torque production capability.
Findings
A comparison of the potentialities of the torque recovery approaches has clearly highlight the superiority of the approach consisting in the re-adjustment of the current initial phases, in an attempt to equilibrate the resulting air gap MMF.
Research limitations/implications
This work should be extended by an experimental validation of the predicted results regarding the back-EMFs and the electromagnetic torque.
Practical implications
The investigation of the considered five phase fractional-slot PM machine under faulty operation should be extended to several faulty scenarios in order to fulfill the requirements of many applications such as the propulsion systems.
Originality/value
The paper proposes different approaches to recover the torque production capability of a five phase fractional-slot PM machine under faulty operation.
Details
Keywords
Hamdi Echeikh, Hichem Kesraoui, Ramzi Trabelsi, Atif Iqbal and Mohamed Faouzi Mimouni
This paper aims to deal with direct torque controller when the five-phase induction motor drive in faulty operation. Precisely, open-phase fault condition is contemplated. Also…
Abstract
Purpose
This paper aims to deal with direct torque controller when the five-phase induction motor drive in faulty operation. Precisely, open-phase fault condition is contemplated. Also, the DTC is combined with a speed-adaptive variable-structure observer based on sliding mode observer.
Design methodology/approach
Two novel features are presented. First, the concept of the virtual voltage vector is presented, which eliminates low-frequency harmonic currents and simplifies analysis. Second, speed information is introduced into the selection of the inverter states.
Findings
Direct torque control (DTC) is largely used in traditional three-phase drives as a backup to rotor-stator flux-oriented methods. The classic DTC strategy was primarily designed on the base of hysteresis controllers to control two independent variables (speed, torque and flux). Due to the additional degrees of freedom offered by multiphase machine, extensive works have been extended on the ensemble five-phase drives in healthy operation. In addition, the ability to continue the operation in faulty conditions is considering one of the main advantages of multiphase machines. One can find in the literature different approaches treating this subject. The applicability of DTC after the appearing of a fault has not been enclosed in the literature.
Originality/value
Theoretical development is presented in details followed by simulation results using Matlab/Simulink to analyze the performance of the drive, comparing with the behavior during healthy situation.
Details
Keywords
Ikhlas Bouzidi, Ahmed Masmoudi and Nicola Bianchi
This paper aims to the design and feature investigation of an interior permanent magnet synchronous machine (IPMSM) dedicated to propulsion applications.
Abstract
Purpose
This paper aims to the design and feature investigation of an interior permanent magnet synchronous machine (IPMSM) dedicated to propulsion applications.
Design/methodology/approach
The design approach as well as the performance investigation of the studied machine are based on a two‐dimensional finite element analysis. This latter is extended to a comparison study with other rotor topologies.
Findings
It has been found that the studied IPMSM offers higher performances than the usual PM machine topologies. This highlights the fact that the rotor design greatly affects the performance of PM machines.
Research limitations/implications
Many continuations of the developed works shall be treated in the future, such as: an optimization of the IPMSM design, an extension of the optimization to the machine‐inverter association, and a validation of the foreseen performance by experiments carried out on a prototype of the IPMSM.
Practical implications
The machine under study could be integrated in electric propulsion applications especially as a wheel‐mounted motor.
Originality/value
The paper treats the design and performance investigation of a new topology of IPM machines. It is a five‐phase concentrated winding synchronous machine with permanent magnet buried in an outer rotor.
Details
Keywords
Ghazal Mirzavand and Akbar Rahideh
This study aims to extract an analytical model for five-phase fault-tolerant permanent-magnet vernier machines (FTPMVMs) based on the analytical solution of Maxwell’s equations…
Abstract
Purpose
This study aims to extract an analytical model for five-phase fault-tolerant permanent-magnet vernier machines (FTPMVMs) based on the analytical solution of Maxwell’s equations, which has some advantages than the finite element model.
Design/methodology/approach
FTPMVMs enhance the torque density by combining the vernier characteristics and the fault-tolerant feature. The principle operation of FTPMVMs is discussed based on the magnetic field modulation due to both permanent magnets and armature current. The analytical solution of the magnetic vector potential in each sub-region is obtained based on the sub-domain technique.
Findings
According to the calculated magnetic vector potential, the magnetic flux density, torque, self- and mutual inductance and back-electromotive force are calculated. The FEM is used to validate the results obtained from the proposed analytic model.
Originality/value
Two-dimensional analytical method is used to obtain the electromagnetic model of FTPMVMs.
Details
Keywords
Ikhlas Bouzidi, Nicola Bianchi and Ahmed Masmoudi
– The purpose of this paper is to deal with the design and optimization of permanent magnet synchronous motors (PMSM) devoted to aeronautic applications.
Abstract
Purpose
The purpose of this paper is to deal with the design and optimization of permanent magnet synchronous motors (PMSM) devoted to aeronautic applications.
Design/methodology/approach
A design approach as well as a performance investigation, based on two-dimensional finite element analysis of selected electromagnetic and thermal features, are applied to chosen PM synchronous machine topologies which differ by their number of phases.
Findings
It has been found that the initial set of geometrical parameters does not fulfill the torque/weight compromise required by a aeronautic applications since it leads to an average temperature rise higher than the authorized limit (class H: 155 K). Therefore, the sizing has been rethought in an attempt to meet the constraints of the considered application.
Research limitations/implications
Several continuations of the developed works shall be treated in the future, such as: (i) the prototyping of the designed machines, (ii) extending the optimization procedure to the whole drive including the motor and the associated static converter, and (iii) the synthesis and implementation of a dedicated control strategy with a suitable emulation of the load.
Practical implications
The studied machines could be integrated in aerospace propulsion systems.
Originality/value
The paper develops a design procedure of PMSM dedicated to aerospace applications where the compromise between torque/weight/temperature represents a crucial design challenge.
Details
Keywords
Jinlin Gong, Bassel Aslan, Frédéric Gillon and Eric Semail
The purpose of this paper is to apply some surrogate-assisted optimization techniques in order to improve the performances of a five-phase permanent magnet machine in the context…
Abstract
Purpose
The purpose of this paper is to apply some surrogate-assisted optimization techniques in order to improve the performances of a five-phase permanent magnet machine in the context of a complex model requiring computation time.
Design/methodology/approach
An optimal control of four independent currents is proposed in order to minimize the total losses with the respect of functioning constraints. Moreover, some geometrical parameters are added to the optimization process allowing a co-design between control and dimensioning.
Findings
The optimization results prove the remarkable effect of using the freedom degree offered by a five-phase structure on iron and magnets losses. The performances of the five-phase machine with concentrated windings are notably improved at high speed (16,000 rpm).
Originality/value
The effectiveness of the method allows solving the challenge which consists in taking into account inside the control strategy the eddy-current losses in magnets and iron. In fact, magnet losses are a critical point to protect the machine from demagnetization in flux-weakening region.
Details
Keywords
Gerasimos G. Rigatos, Pierluigi Siano, Mohammed S. Al-Numay, Bilal Sari and Masoud Abbaszadeh
The purpose of this article is to treat the nonlinear optimal control problem in EV traction systems which are based on 5-phase induction motors. Five-phase permanent magnet…
Abstract
Purpose
The purpose of this article is to treat the nonlinear optimal control problem in EV traction systems which are based on 5-phase induction motors. Five-phase permanent magnet synchronous motors and five-phase asynchronous induction motors (IMs) are among the types of multiphase motors one can consider for the traction system of electric vehicles (EVs). By distributing the required power in a large number of phases, the power load of each individual phase is reduced. The cumulative rates of power in multiphase machines can be raised without stressing the connected converters. Multiphase motors are also fault tolerant because such machines remain functional even if failures affect certain phases.
Design/methodology/approach
A novel nonlinear optimal control approach has been developed for five-phase IMs. The dynamic model of the five-phase IM undergoes approximate linearization using Taylor series expansion and the computation of the associated Jacobian matrices. The linearization takes place at each sampling instance. For the linearized model of the motor, an H-infinity feedback controller is designed. This controller achieves the solution of the optimal control problem under model uncertainty and disturbances.
Findings
To select the feedback gains of the nonlinear optimal (H-infinity) controller, an algebraic Riccati equation has to be solved repetitively at each time-step of the control method. The global stability properties of the control loop are demonstrated through Lyapunov analysis. Under moderate conditions, the global asymptotic stability properties of the control scheme are proven. The proposed nonlinear optimal control method achieves fast and accurate tracking of reference setpoints under moderate variations of the control inputs.
Research limitations/implications
Comparing to other nonlinear control methods that one could have considered for five-phase IMs, the presented nonlinear optimal (H-infinity) control approach avoids complicated state-space model transformations, is of proven global stability and its use does not require the model of the motor to be brought into a specific state-space form. The nonlinear optimal control method has clear implementation stages and moderate computational effort.
Practical implications
In the transportation sector, there is progressive transition to EVs. The use of five-phase IMs in EVs exhibits specific advantages, by achieving a more balanced distribution of power in the multiple phases of the motor and by providing fault tolerance. The study’s nonlinear optimal control method for five-phase IMs enables high performance for such motors and their efficient use in the traction system of EVs.
Social implications
Nonlinear optimal control for five-phase IMs supports the deployment of their use in EVs. Therefore, it contributes to the net-zero objective that aims at eliminating the emission of harmful exhaust gases coming from human activities. Most known manufacturers of vehicles have shifted to the production of all-electric cars. The study’s findings can optimize the traction system of EVs thus also contributing to the growth of the EV industry.
Originality/value
The proposed nonlinear optimal control method is novel comparing to past attempts for solving the optimal control problem for nonlinear dynamical systems. It uses a novel approach for selecting the linearization points and a new Riccati equation for computing the feedback gains of the controller. The nonlinear optimal control method is applicable to a wider class of dynamical systems than approaches based on the solution of state-dependent Riccati equations.
Details
Keywords
Yi Sui, Ping Zheng, Peilun Tang, Fan Wu and Pengfei Wang
The purpose of this paper is to investigate a five-phase permanent-magnet synchronous machine (PMSM) that features high-power density and high-fault-tolerant capability for…
Abstract
Purpose
The purpose of this paper is to investigate a five-phase permanent-magnet synchronous machine (PMSM) that features high-power density and high-fault-tolerant capability for electric vehicles (EVs).
Design/methodology/approach
The five-phase 20-slot/18-pole PMSM is designed by finite-element method. Two typical rotor structures which include Halbach array and rotor eccentricity are compared to achieve sinusoidal back electromotive force (EMF). The influence of slot dimensions on leakage inductance and short-circuit current is analyzed. The method to reduce eddy current loss of permanent magnets (PMs) is investigated. The machine performances under both healthy and fault conditions are evaluated. Finally, thermal behavior of the machine is studied by Ansys.
Findings
With both no-load and load performances considered, rotor eccentricity is proposed to reduce the harmonic contents of EMF. Increasing slot leakage inductance is an effective way to limit the short-circuit current. By segmenting PMs in circumferential direction, the PM eddy current loss is reduced and the machine efficiency is improved. With proper fault-tolerant control strategy, acceptable torque performance can be achieved under fault conditions. The proposed machine can safely operate under Class F insulation.
Originality/value
So far, many researches focus on multiphase PMSMs used in aviation fields, such as fuel pump and electric actuator. Differing from PMSMs used in aviation applications, machines for EVs require characteristics like wide speed ranges and variable operating conditions. Hence, this paper proposes a five-phase 20-slot/18-pole PMSM for EVs. The proposed design methodology is applicable to multiphase PMSMs with different slot/pole combinations.
Details
Keywords
Massimo Barcaro and Nicola Bianchi
The purpose of this paper is to give an overview of the design issues of permanent magnet machines for the hybrid electric and plug‐in electric vehicles, including railway…
Abstract
Purpose
The purpose of this paper is to give an overview of the design issues of permanent magnet machines for the hybrid electric and plug‐in electric vehicles, including railway traction and naval propulsion.
Design/methodology/approach
Focus is given on both synchronous permanent magnet and reluctance machines. An overview of the design rules are provided, covering the topics of: fractional‐slot windings, fault‐tolerant configurations, flux‐weakening capability, and torque quality.
Findings
The peculiarities of these machines and the advanced design considerations to fit the automotive requirements are analyzed.
Originality/value
The paper includes a wide description of innovative electrical machines for electric vehicles, including not only the traction capability, but also analysis of features as weight reduction, torque ripple reduction, increase of fault tolerance, and so on.
Details
Keywords
Siavash Sadeghi and Leila Parsa
The purpose of this paper is to minimize the torque pulsation in Halbach array permanent magnet synchronous machines (PMSMs).
Abstract
Purpose
The purpose of this paper is to minimize the torque pulsation in Halbach array permanent magnet synchronous machines (PMSMs).
Design/methodology/approach
Because of its specific structure, the cogging torque influences the main part of the torque pulsation in a Halbach array PMSM. In this paper, first it is shown that the conventional magnet skewing method does not have a significant effect on the torque pulsation in this motor, and then an improved skewing method with fewer skewing steps is proposed. In this method permanent magnet segments are placed sinusoidally, with two‐step skewing along the rotor. Generalization with different combinations of slots and poles is considered for a Halbach array PMSM.
Findings
Using a detailed finite element method (FEM) it was found that with the proposed technique the cogging torque factor is reduced to as low as 8 percent, while the average value of the torque is maintained near the machine nominal average torque.
Practical implications
Halbach array PMSMs are very good candidates for high dynamic performance applications such as aerospace applications due to their high acceleration and deceleration features. This technique also resolves the mechanical vibration and acoustic noise issues, which are caused by torque pulsation and significantly affect machine performance.
Originality/value
The originality of this paper lies in the FEM results. Since Halbach array PMSMs have a special structure it was shown that the conventional skewing method does not work well for this machine. The new proposed technique has a significant effect on the torque pulsation.
Details