Search results

The research evaluated the feasibility of 3D dynamic fit utilizing female compression tops by comparatively analyzing the virtual and actual dynamic fit.

Six female participants were 3D body-scanned and photographed in compression tops in four types of athletic movements (pull-up, kettlebell swing, circle-crunch and sit-up). Fit measurements, waist cross-sectional areas, waist width, waist depth, numerical simulation of clothing pressure (kPa) and objective pressure measurements (kPa) were collected from 3D virtual animation, 3D fit scan data and actual photos with the four types of athletic motions. The data were comparatively investigated between virtual and actual dynamic fit.

The 3D-animated body was not reflected with human body deformation because only bone structure was changed while maintaining the constant forms of muscle and body surface in athletic movements. Due to this consistency of virtual dynamic fit, there were significant differences with the actual dynamic fit at the top length, shoulder width and waist cross-sectional areas. Also, the virtual dynamic pressure indicated significantly higher levels than the objective dynamic pressure while presenting no significant correlations at the front neckline, breast, lateral waist, upper back, back armhole and back waist.

This study is the first to verify multiple aspects of virtual dynamic fit using 3D digital technology. This study provided useful information about which aspects of the current virtual animation need to be improved to apply in the dynamic fit evaluation.

This paper presents an experimental investigation in establishing the relationship between FDM process parameters and tensile strength of polycarbonate (PC) samples using the I-Optimal design.

I-optimal design methodology is used to plan the experiments by means of Minitab-17.1 software. Samples are manufactured using Stratsys FDM 400mc and tested as per ISO standards. Additionally, an artificial neural network model was developed and compared to the regression model in order to select an appropriate model for optimisation. Finally, the genetic algorithm (GA) solver is executed for improvement of tensile strength of FDM built PC components.

This study demonstrates that the selected process parameters (raster angle, raster to raster air gap, build orientation about Y axis and the number of contours) had significant effect on tensile strength with raster angle being the most influential factor. Increasing the build orientation about Y axis produced specimens with compact structures that resulted in improved fracture resistance.

The fitted regression model has a p-value less than 0.05 which suggests that the model terms significantly represent the tensile strength of PC samples. Further, from the normal probability plot it was found that the residuals follow a straight line, thus the developed model provides adequate predictions. Furthermore, from the validation runs, a close agreement between the predicted and actual values was seen along the reference line which further supports satisfactory model predictions.

This study successfully investigated the effects of the selected process parameters - raster angle, raster to raster air gap, build orientation about Y axis and the number of contours - on tensile strength of PC samples utilising the I-optimal design and ANOVA. In addition, for prediction of the part strength, regression and ANN models were developed. The selected ANN model was optimised using the GA-solver for determination of optimal parameter settings.

The proposed ANN-GA approach is more appropriate to establish the non-linear relationship between the selected process parameters and tensile strength. Further, the proposed ANN-GA methodology can assist in manufacture of various industrial products with Nylon, polyethylene terephthalate glycol (PETG) and PET as new 3DP materials.

Accurate and automatic clothing pattern making is very important in personalized clothing customization and virtual fitting room applications. Clothing pattern generating as well as virtual clothing simulation is an attractive research issue both in clothing industry and computer graphics.

Physics-based method is an effective way to model dynamic process and generate realistic clothing animation. Due to conceptual simplicity and computational speed, mass-spring model is frequently used to simulate deformable and soft objects follow the natural physical rules. We present a physics-based clothing pattern generating framework by using scanned human body model. After giving a scanned human body model, first, we extract feature points, planes and curves on the 3D model by geometric analysis, and then, we construct a remeshed surface which has been formatted to connected quad meshes. Second, for each clothing piece in 3D, we construct a mass-spring model with same topological structures, and conduct a typical time integration algorithm to the mass-spring model. Finally, we get the convergent clothing pieces in 2D of all clothing parts, and we reconnected parts which are adjacent on 3D model to generate the basic clothing pattern.

The results show that the presented method is a feasible way for clothing pattern generating by use of scanned human body model.

The main contribution of this work is twofold: one is the geometric algorithm to scanned human body model, which is specially conducted for clothing pattern design to extract feature points, planes and curves. This is the crucial base for suit clothing pattern generating. Another is the physics-based pattern generating algorithm which flattens the 3D shape to 2D shape of cloth pattern pieces.

Human resource management (HRM) practices must take an ambidextrous approach because of changing work environments and challenges. Ambidextrous practices in HRM fall in the domain of developing expertise for complex environments and reducing ambiguities in present turbulent times. Dual-oriented ambidextrous human resource practices (AHRP) can promote employee innovation performance. Drawing on social exchange theory to explore the impact of AHRP on employee innovation performance, this paper examines the mediating role of inclusive leadership style.

Data were collected through a questionnaire from employees of three Fortune 500 Chinese companies from the telecom, electronics and automotive sectors with temporal separation in two waves. The final sample constituted 276 useable responses.

Results indicate that ambidextrous HR practices have a significant impact on innovation performance, and an inclusive leadership style mediates this relationship, together explaining a 27.8% variance.

This paper examines the effect of dual-oriented AHRPs in the emerging markets context as a guide to best practices for managers to employ ambidexterity in HRM to enhance employees' innovation performance by enhancing both commitment as well as cooperation simultaneously.

The person who works in an office starts his or her day with a choice of attire. The way they look in the office depends on the decisions they make on their clothes. This study aims to identify the challenges faced by employees in the management positions in the Sri Lankan apparel industry who regularly come into contact with customers when they have to decide upon the most appropriate work attire for the position they are occupying in their organization.

Collection of data was primarily achieved through a well-structured questionnaire containing a mixture of open- and closed-ended questions. Targeted employees were managers, designers and merchandisers belonging to Generation Y whose total number was sufficient to obtain 50 feedbacks. Six more interviews were conducted with the intention of finding out more about this matter.

The majority of employees in the management positions in the Sri Lankan apparel industry who have regular contact with customers prefer to dress in “smart casual attire”, which means semi-formal clothes. Lack of availability of certain varieties of business attire in Sri Lanka proved to be a major challenge for some employees. Overpriced clothing, less comfortable clothing and lack of the right fabrics and designs were also challenges. These findings highlight the importance of manufacturing a wider variety of business attire using moderately priced but comfortable fabrics to make affordable and good quality products. There is a need to have a persuasive merchandising method to achieve good sales and provide a pleasant shopping experience to the customers.

Sri Lankan workwear retailers as well as apparel designers can benefit from the findings of this research as there is no evidence of any other studies on this subject. Therefore, this will help them to fill the market gap for business attire by addressing these challenges.

This paper aims to determine the impact of perceived virtuality on team dynamics and outcomes by adopting the Input-Mediators-Outcome (IMO) framework. Further, it also investigates the mediating role of team processes and emergent states.

The authors collected survey data from 315 individuals working in virtual teams (VTs) in the information technology sector in India using both offline and online questionnaires. They performed the analysis using Partial Least Squares Structural Equation Modelling (PLS-SEM).

The authors investigated two sets of hypotheses – both direct and indirect (or mediation interactions). Results show that psychological empowerment and conflict management are significant in managing VTs. Also, perceived virtuality impacts team outcomes, i.e. perceived team performance, team satisfaction and subjective well-being.

The interplay between the behavioural team process (conflict management) and the emergent state (psychological empowerment) was examined. The study also helps broaden our understanding of the various psychological variables associated with teamwork in the context of VTs.

Findings from this study will aid in assessing the consequences of virtual teamwork at both individual and organisational levels, such as guiding the design and sustainability of VT arrangements, achieving higher productivity in VTs, and designing effective and interactive solutions in the virtual space.

The study examined the interplay between behavioural team processes (such as conflict management) and emergent states (such as psychological empowerment). The study also theorises and empirically tests the relationships between perceived virtuality and team outcomes (i.e. both affective and effectiveness). It may serve as a guide to understanding team dynamics in VTs better.

This exploratory study attempts to enhance the current understanding of the research and practice of VTs within a developing economy.

This study assesses performance measurement (PM) system implementation efforts across various organizational contexts and investigates which factors are critical to achieving implementation success (IS).

An empirical field study was conducted to refine a framework of PM system IS that consists of 5 dimensions of success and 29 factors. A survey questionnaire was used to investigate actual organizational practice and exploratory factor analysis was conducted to refine constructs corresponding to potential factors and dimensions of IS. The resulting variables were then investigated using multiple regression analysis to identify critical success factors for implementing PM systems.

The survey was completed by representatives from 124 organizations and the exploratory factor analysis results indicated that there are three underlying dimensions of IS (i.e. Use of the System, PM System Performance, and Improved Results and Processes) and 12 factors. Of the factors, nine can be considered critical success factors having a significant relationship with at least one dimension of IS: Leader Support, Design and Implementation Approach, Reward System Alignment, Organizational Acceptance, Organizational Culture and Climate, Easy to Define Environment, IT Infrastructure Capabilities, PM System Design Quality, and PM Participation and Training.

The results show that there are distinct dimensions of IS and, although some factors are associated with all dimensions, most are more closely related to only one dimension. This suggests that different strategies should be utilized based on the types of challenges experienced during implementation.

This paper highlights an assignment in a combination upper-division undergraduate and graduate civic leadership class at a Midwestern state comprehensive university. The three-part assignment challenges students’ critical thinking skills and research capabilities while simultaneously necessitating the exploration of contrasting viewpoints on contentious issues.

Intentionally exposing students to diverse perspectives in a controlled environment.

We posit that the severity and frequency of these issues can be mitigated through focused efforts.

Students are better prepared to engage in civil debate on controversial topics, which continuously divide our communities, after completing a class using this pedagogical strategy.

The purpose of this paper is to investigate the distribution characteristics of airflow in mine ventilation suits with different pipeline structures when the human body is bent at various angles. On this basis, the stress points are extracted to investigate the pressure variation of a ventilation suit under different ventilation rates and pipeline structures.

Based on the three-dimensional human body scanner, portable pressure test and other instruments, a human experiment was conducted in an artificial cabin. The study analyzed and compared the distribution characteristics of clearance under three different pipeline structures, as well as the pressure variation of the ventilation suit.

The study found that the clearance in front of two pipeline structures gradually increased in size as the degree of bending increased, and there was minimal clearance in the chest and back. The longitudinal structure exhibits a significant decrease in clearance compared to the spiral structure. The pressure value of the spiral pipeline structure with the same ventilation volume is low, followed by the transverse structure, while the longitudinal structure has the highest pressure value. The increase in clothing pressure value of a spiral pipeline structured ventilation suit with varying ventilation volumes is minimal.

The ventilation suit has a promising future as a type of personal protective equipment for mitigating heat damage in mines. It is of great value to study the pipeline structure of the ventilation suit for human comfort.

Industry 4.0 has an inimitable potential to create competitive advantages for the apparel industry by enhancing productivity, production, profitability, efficiency and effectiveness. This study, thus, aims to assess the digitalisation level of the Tanzanian apparel industry through the Industry 4.0 perspectives.

A mixed-methods-based approach was deployed. This study deployed semi-structured interviews, document review and observation methods for the qualitative approach. For the quantitative approach, closed-ended questionnaires were used to ascertain the digitalisation levels and maturity level of the textiles and apparel (T&A) factories and small and medium-sized textile enterprises in Tanzania. The sample size was 110, with participants engaged through the purposive sampling technique.

Industry 4.0 frameworks evolved into practices mainly since 2011 in several service and manufacturing industries globally. For Tanzania, the findings indicate that the overall maturity level of the T&A industries is 2.5 out of 5.0, demonstrating a medium level of adoption. Thus, the apparel industries are not operating under the industry 4.0 framework; they are operating within the third industrial revolution – Industry 3.0 – framework. For such industries to operate within the fourth industrial revolution – Industry 4.0 – that is only possible if there is significantly well-developed industrial infrastructure, availability of engineering talent, stable commercial partnerships, demand from the marketplace and transactional relationship with customers.

This study’s limitations include: firstly, Industry 4.0 is an emerging area; this resulted in limited theoretical underpinnings in the Tanzanian perspectives. Secondly, the studied industries may not suffice the need to generalise the findings for the entire country, thus needing another study.

Although Industry 4.0 conceptual frameworks have been on trial in several industries since 2011, this is amongst the first empirical research on Industry 4.0 in the Tanzanian apparel industry that assesses the digitalisation levels.