Search results

The purpose of this study is to investigate the effect on flexural strength of fire-damaged concrete repaired with high-strength mortar (HSM).

Reinforced concrete beams with dimension of 100 mm × 100 mm × 500 mm were used in this study. Beams were then heated to 400°C and overlaid with either HSM or high-strength fiber reinforced mortar (HSFM) to measure the effectiveness of repair material. Repaired beams of different material were then tested for flexural strength. Another group of beams was also repaired and tested by the same procedure but was heated at higher temperature of 600°C.

Repair of 400°C fire-damaged samples using HSM regained 72 per cent of its original flexural strength, 100.8 per cent of its original toughness and 56.9 per cent of its original elastic stiffness. Repair of 400°C fire-damaged samples using HSFM regained 113.5 per cent of its original flexural strength, 113 per cent of its original toughness and 85.1 per cent of its original elastic stiffness. Repair of 600°C fire-damaged samples using HSM regained 18.7 per cent of its original flexural strength, 25.9 per cent of its original peak load capacity, 26.1 per cent of its original toughness and 22 per cent of its original elastic stiffness. Repair of 600°C fire-damaged samples using HSFM regained 68.4 per cent of its original flexural strength, 96.5 per cent of its original peak load capacity, 71.2 per cent of its original toughness and 52.2 per cent of its original elastic stiffness.

This research is limited to the size of the furnace. The beam specimen is limited to 500 mm of length and overall dimensions. This dimension is not practical in actual structure, hence it may cause exaggeration of deteriorating effect of heating on reinforced concrete beam.

This study may promote more investigation of using HSM as repair material for fire-damaged concrete. This will lead to real-world application and practical solution for fire-damaged structure.

The aim of this research in using HSM mostly due to the material’s high workability which will ease its application and promote quality in repair of damaged structure.

There is a dearth of research on using HSM as repair material for fire-damaged concrete. Some research has been carried out using mortar but at lower strength compared to this research.

This research aims to use the finite element method to examine critical distress modes in the pavement layers due to changes in the structural properties brought upon by fire damage.

A full dynamic analysis is performed to replicate heavy vehicle axle wheel loads travelling over a pavement section.

Results show a 72 per cent decrease in the number of load repetitions which a fire-damaged pavement can experience before fatigue cracking of the asphalt. Further, there is a 51 per cent decrease in loading cycles of the subgrade before rutting of the fire-damaged system.

Fatigue of asphalt and deformation of subgrade from repeated vehicular loading are the most common failure mechanisms, and major attributors to pavement maintenance and rehabilitation costs. Pavement analysis has always been concentrated on evaluating deterioration under regularly occurring operational conditions. However, the impact of one-off events, such as vehicle petroleum fires, has not been evaluated for the effects on deterioration.

This paper aims to present a mathematical model of predicting the residual moment capacity of fire-damaged reinforced concrete (RC) elements after cooling to ambient temperature which also reflects the role of bond between steel rebar and surrounding concrete.

The prediction of residual moment capacity of fire-damaged RC element has been carried out for two scenarios: by assuming perfect bond between surrounding concrete and steel rebar after fire exposure and by incorporating a relative slip between surrounding concrete and steel rebar and hence assuming partial bond between them after fire scenario. The predicted results are then compared with the experimental results available in different literatures.

It is found that on comparison between the predicted results and the experimental results, the proposed mathematical prediction model, when bond-characteristics are considered, shows better agreement with the experimental results as compared with those by conventional method with perfect bond assumption.

The constitutive relationship for thermal residual properties of steel rebar and concrete has been used in the proposed prediction model along with relative slip approach between surrounding concrete and steel rebar after fire scenario and consequently to predict the residual moment capacity of the fire-damaged RC element after cooling.

At elevated temperatures, concrete undergoes changes in its mechanical and thermal properties, which mainly cause degradation of strength and eventually may lead to the failure of the structure. Retrofitting is a desirable option to rehabilitate fire damaged concrete structures. However, to ensure safe reuse of fire-exposed buildings and to adopt proper retrofitting methods, it is essential to evaluate the residual load-bearing capacity of such fire-damaged reinforced concrete structures. The focus of the experimental study presented in this paper aims to investigate the fire performance of concrete columns exposed to a standard fire, and then evaluate its residual compressive strengths after fire exposure of different durations.

To effectively study the fire performance of such columns, eight identical 200 × 200 × 1,500-mm high reinforced concrete columns test specimens were subjected to two different fire exposure (1- and 2-h) while being loaded with two different load ratios (20% and 40% of the column ultimate design axial compressive load). In a subsequent stage and after complete cooling down, residual compressive strength capacity tests were performed on each fire exposed column.

Experimental results revealed that the columns never regain its original capacity after being subjected to a standard fire and that the residual compressive strength capacity dropped to almost 50% and 30% of its ambient temperature capacity for the columns exposed to 1- and 2-h fire durations, respectively. It was also noticed that, for the tested columns, the applied load ratio has much less effect on the column’s residual compressive strength compared to that of the fire duration.

According to the unique outcomes of this experimental study and, as the fire-damaged concrete columns possessed considerable residual compressive strength, in particular those exposed to shorter fire duration, it is anticipated that with proper retrofitting techniques such as fiber-reinforced polymers (FRP) wrapping, the fire-damaged columns can be rehabilitated to regain at least portion of its lost load-bearing capacities. Accordingly, the residual compressive resistance data obtained from this study can be effectively used but not directly to adopt optimal retrofitting strategies for such fire-damaged concrete columns, as well as to be used in validating numerical models that can be usefully used to account for the thermally-induced degradation of the mechanical properties of concrete material and ultimately predict the residual compressive strengths and deformations of concrete columns subjected to different load intensity ratios for various fire durations.

This study aims to investigate and compare the interfacial bond characteristics between fire-damaged normal concrete substrate and ultra-high-performance fiber-reinforced concrete (UHPFRC) as a repair material.

First, fire-damaged normal concrete was prepared. Then, with a cast surface, the substrate was subjected to different surface moisture conditions. Three types of moisture conditions were set, namely, air dry, saturated surface dry (SSD) and wet. Slant shear and splitting cylinder tests were conducted to determine the interfacial bond strength of the composite.

In general, results indicate that surface moisture conditions significantly influence bond strength. The substrate under SSD condition exhibited the highest bond strength. The findings suggest that UHPFRC is a promising material for the repair and reuse of fire-damaged concrete structures.

This study compares the bond strength between fire-damaged normal concrete and UHPRC.

Introduction Most professionals engaged in the investigation of fire‐damaged buildings are very conscious of the potentially dangerous environment in which they work. Fire‐damaged structures generally have no remaining services, these either having been destroyed or disconnected. The damaged parts of the structure are generally all in one colour — black — as a result of extensive smoke damage, and visibility in the absence of artificial lighting is invariably poor.

Since columns are critical structural elements, they shall withstand hazards without any considerable damage. In the case of a fire, although concrete has low thermal conductivity compared to other construction materials, its properties are changed at elevated temperatures. Most critically, the residual compressive strengths of reinforced concrete columns are significantly reduced after fire exposure. Validation of the worthiness of rehabilitating concrete structures after fire exposure is highly dependent on accurately determining the residual strengths of fire-damaged essential structural elements such as columns.

In this study, eight reinforced-concrete columns (200 × 200 × 1,500 mm) that were experimentally examined in a prior related study have been numerically modelled using ABAQUS software to investigate their residual compressive strengths after exposure to different durations of standard fire (i.e. one and two hours) while subjected to different applied load ratios (i.e. 20 and 40% of the compressive resistance of the column). Outcomes of the numerical simulations were verified against the prior study's experimental results.

In a subsequent phase, the results of a parametric study that has been completed as part of the current study to investigate the effects of the applied load ratios show that the application of axial load up to 80% of the compressive resistance of the column did not considerably influence the residual compressive strength of the shorter columns (i.e. 1,500 and 2,000-mm high). However, increasing the height of the column to 2,500 or 3,000 mm considerably reduced the residual compressive strength when the load ratio applied on the columns exceeded 60 and 40%, respectively. Also, when the different columns were simulated under two-hour standard fire exposure, the dominant failure was buckling rather than concrete crushing which was the typical failure mode in most columns.

The outcomes of the numerical study presented in this paper reflect the residual compressive strength of RC columns subjected to various applied load ratios and standard fire durations. Also, the parametric study conducted as part of this research on the effects of higher load ratios and greater column heights on the residual compressive strength of the fire-damaged columns is practical and efficient. The developed computer models can be beneficial to assist engineers in assessing the validity of rehabilitating concrete structures after being exposed to fire.

This case study concerns a two‐storey supermarket building which was partially gutted by fire during the Handsworth riots in Birmingham in 1985. Burks Green and Partners were commissioned by the loss adjustors to investigate the structural significance of damage to the building and to advise on the viability of repair. Representatives of the insured considered that the best course of action was to demolish and rebuild. In the course of investigation, certain inherent defects in the structure also became apparent and it was necessary to encompass these within the repair scheme. In order to satisfy the owner's representatives about the effectiveness of proposed repairs, a trial area was first repaired and load‐tested.

The creation of occupant satisfaction can be reached through the involvement of building performance mandates (BPMs) while enhancing the functionality of buildings. BPMs comprise five mandates namely, spatial performance, thermal performance, indoor air quality performance, acoustic performance, and visual performance. BPMs have been recognized as a vital element when refurbishing post-fire apparel buildings. However, the evaluation of post-fire refurbishment projects is mainly focused on mechanical and physical properties while ignoring the BPMs. Further, there is insufficient literature on the BPMs in post-fire building refurbishment. Hence, the purpose of this research is to identify the importance of BPMs, and its challenges and propose strategies to enhance the building performance of post-fire refurbished apparel manufacturing buildings in Sri Lanka.

The study was conducted by involving a qualitative research approach. An extensive literature review and eighteen semi-structured interviews under three fire-affected apparel cases were involved as data collection methods and collected data were analyzed using content analysis.

Findings highlighted the procedure of post-fire refurbishment and the importance of BPMs for apparel buildings to enhance building performance in post-fire situations. The research identified 42 challenges encountered in maintaining BPMs of post-fire refurbished apparel buildings and provided 70 strategies to overcome the identified challenges.

This study offers a comprehensive analysis of challenges in maintaining BPMs and strategies to overcome the identified challenges which facilitate enhancing the performance of post-fire refurbished apparel buildings in Sri Lanka.

This paper aims to present technical aspects of the assessment method and evaluation of fire damaged steel structures. The current work focuses on the behavior of structural normal steel (hot-rolled and cold-formed) and high-strength bolts after exposure to elevated temperatures. Information on stainless steel, cast iron and wrought iron is also presented.

Because of the complexity of the issue, an elaborate presentation of the mechanical properties influencing factors is followed. Subsequently, a wide range of experimental studies is extensively reviewed in the literature while simplified equations for determining the post-fire mechanical properties are proposed, following appropriate categorization. Moreover, the reinstatement survey is also comprehensively described.

Useful conclusions are drawn for the safe reuse of the structural elements and connection components. According to the parametric investigation of the aforementioned data, it can be safely concluded that the most common scenario of buildings after fire events, i.e. apart from excessively distorted structures, implies considerable remaining capacity of the structure, highlighting that subsequent demolition should not be the case, especially regarding critical infrastructure and buildings.

The stability of the structure as a whole is addressed, with aim to establish specific guidelines and code provisions for the correct appraisal and rehabilitation of fire damaged structures.