Search results

In high voltage direct current cable systems, cable joints are known as the least reliable components due to the use of multiple dielectrics. Resulting from the electric field and temperature depending conductivity of the different dielectrics, field enhancement at critical areas, e.g. triple points, may result in accelerated aging and the failure of the component. To reduce the stress, different field grading techniques are applied. The purpose of this study is to investigate different grading techniques for cable joints. Different shapes of the electrode and a varying nonlinear conductivity of field grading materials (FGM) are used for the simulation of the electric field.

Coupled electro-thermal field simulations are applied for different joint geometries, to obtain the stationary electric field. Electric field simulations in cable joint using geometric and nonlinear field grading techniques are shown.

Using the geometric field grading, the shape of the stress cone determines the field values in critical areas (triple points). High stress reduction is obtained for a certain curvature of the stress cone. For the nonlinear stress control, materials with a higher conductivity in comparison to the cable and the joint material are used. A field reduction is obtained by increasing the total conductivity. On the other hand, this is also increasing the insulation losses within the total FGM. More applicable is the decrease of the switching field or the increase of nonlinearity, which is only locally increase the conductivity and the insulation losses. Furthermore, simulations results show that an approximately constant field reduction is obtained, if the nonlinearity is above a certain threshold.

This study is restricted to a field dependency of FGM only. For impulse voltages, high temperature and electric conductivity values my result in a thermal runaway. Furthermore, only direct current field grading techniques are studied.

The field grading of cable joints, using geometric and nonlinear techniques, is analyzed. A comparison between the electric field, by varying the curvature of the ground stress cone or the FGM conductivity constants in a complex joint geometry is novel. With its effect on the electric fields, general requirements for the geometry (geometric field grading) or the values of the FGM constants (nonlinear field grading) are defined to obtain a sufficient field grading.

The purpose of this paper is to analyze the accuracy of finite element method simulations for high voltage equipment featuring resistive field grading.

In such simulations, the order of the mesh used and the polynomial order of the ansatz functions are varied while maintaining mesh and simulation parameters. The resulting accuracy of the simulations is analyzed by an error convergence study which shows the relative errors against the number of degrees of freedom the computational time and the memory consumption.

Simulation results of simplified benchmark geometry and applications to large‐scale 3D high voltage equipment are presented herein.

The impact of the order of the mesh and the Ansatz functions are studied for realistic high voltage setups. The paper helps the user of simulation software to choose adequate simulation parameters.

This paper aims to develop an automated domain decomposition strategy that is based on the presence of nonlinear field grading material, in the context of model order reduction for transient strongly nonlinear electro-quasistatic (EQS) field problems.

The paper provides convincing empirical insights to support the proposed domain decomposition algorithm, a numerical investigation of the performance of the algorithm for different snapshots and model order reduction experiments.

The proposed method successfully decomposes the computational domain, while the resulting reduced models are highly accurate. Further, the algorithm is computationally efficient and robust, while it can be embedded in black-box model reduction implementations.

This paper fulfills the demand to effectively perform model order reduction for transient strongly nonlinear EQS field problems.

Gas insulated systems, such as gas insulated lines (GIL), use insulating gas, mostly sulfur hexalfluoride (SF₆), to enable a higher dielectric strength compared to e.g. air. However, under high voltage direct current conditions, charge accumulation and electric field stress may occur, which may lead to partial discharge or system failure. Therefore, numerical simulations are used to design the system and determine the electric field and charge distribution. Although the gas conduction shows a more complex current–voltage characteristic compared to solid insulation, the electric conductivity of the SF₆ gas is set as constant in most works. The purpose of this study is to investigate different approaches to address the conduction in the gas properly for numerical simulations.

In this work, two approaches are investigated to address the conduction in the insulating gas and are compared to each other. One method is an ion-drift-diffusion model, where the conduction in the gas is described by the ion motion in the SF₆ gas. However, this method is computationally expensive. Alternatively, a less complex approach is an electro-thermal model with the application of an electric conductivity model for the SF₆ gas. Measurements show that the electric conductivity in the SF₆ gas has a nonlinear dependency on temperature, electric field and gas pressure. From these measurements, an electric conductivity model was developed. Both methods are compared by simulation results, where different parameters and conditions are considered, to investigate the potential of the electric conductivity model as a computationally less expensive alternative.

The simulation results of both simulation approaches show similar results, proving the electric conductivity for the SF₆ gas as a valid alternative. Using the electro-thermal model approach with the application of the electric conductivity model enables a solution time up to six times faster compared to the ion-drift-diffusion model. The application of the model allows to examine the influence of different parameters such as temperature and gas pressure on the electric field distribution in the GIL, whereas the ion-drift-diffusion model enables to investigate the distribution of homo- and heteropolar charges in the insulation gas.

This work presents numerical simulation models for high voltage direct current GIL, where the conduction in the SF₆ gas is described more precisely compared to a definition of a constant electric conductivity value for the insulation gas. The electric conductivity model for the SF₆ gas allows for consideration of the current–voltage characteristics of the gas, is computationally less expensive compared to an ion-drift diffusion model and needs considerably less solution time.

The Equal Pay Act 1970 (which came into operation on 29 December 1975) provides for an “equality clause” to be written into all contracts of employment. S.1(2) (a) of the 1970 Act (which has been amended by the Sex Discrimination Act 1975) provides:

The purpose of the study is to perform elastic stress and deformation analysis of a functionally graded hollow disk under different conditions (rotation, gravity, internal pressure, temperature with variable heat generation) and their combinations.

The classical method of solution, Navier's equation, is used to solve the governing equation. The analysis considers thermal and mechanical boundary conditions and takes into account the variation of material properties according to a power law function of the radius of the disk and grading parameter.

The findings of the study reveal distinct trends and behaviors based on different grading parameters. The influence of gravity is found to be negligible, resulting in similar patterns to the pure rotation case. Variable heat generation introduces non-linear temperature profiles and higher displacements, with stress values influenced by grading parameters.

The study provides valuable insights into the behavior of displacement and stresses in hollow disks, offering a deeper understanding of their mechanical response under varying conditions. These insights can be useful in the design and analysis of functionally graded hollow disks in various engineering applications.

The originality and value of this study lies in the consideration of various loading combinations of rotation, gravity, internal pressure and temperature with variable heat generation. Furthermore, the study of effect of various angular rotations, temperatures and pressures expands the understanding of the mechanical behavior of such structures, contributing to the existing body of knowledge in the field.

Underground cables can produce higher electromagnetic fields directly above them than an overhead line. The majority of cable failures on distribution system are caused by defects in the cable accessories. Nowadays, significant research has been carried out worldwide into examining whether electricity, and in particular, the presence of electric and magnetic fields have an adverse impact on health, especially the occurrence of cancer and childhood leukemia. The purpose of this paper is to optimize the electric field distribution in underground cable accessories. This reduces the impact of the harmful effects of the fields on living beings and humans.

Cable terminations and joints are designed to eliminate the stress concentration at the termination screen to avoid the breakdown of the cable and high values of electric field at these points. Any improvement in the cable termination and joints construction is of great interest. There are several methods for the solution of electric field distribution. These can be summarized as analytical, experimental, free-hand field mapping, analogue methods and numerical methods. In this paper cable accessories are modeled by using multilayer dielectric system and very thin deflector’s cones.

This model includes specific insulators design and smart choice of electrodes position. Stress-grading nonlinear materials in form of tapes and tubes were used with much success. In order to optimize the cable joint parameters, two criteria were monitored – total electric field magnitude and magnitude of the tangential component. More than 30 percent is reduced impact of cables on the environment.

In order to investigate the accuracy of the applied numerical model, various configurations of the cable accessories are studied. The first time is applied new Hybrid Boundary Elements Method on the protection of the environment.

Recent work has demonstrated the possibility of selectively sintering polymer powders with radio frequency (RF) radiation as a means of rapid, volumetric additive manufacturing. Although RF radiation can be used as a volumetric energy source, non-uniform heating resulting from the sample geometry and electrode configuration can lead to adverse effects in RF-treated samples. This paper aims to address these heating uniformity issues by implementing a computational design strategy for doped polymer powder beds to improve the RF heating uniformity.

Two approaches for improving the RF heating uniformity are presented with the goal of developing an RF-assisted additive manufacturing process. Both techniques use COMSOL Multiphysics® to predict the temperature rise during simulated RF exposure for different geometries. The effectiveness of each approach is evaluated by calculating the uniformity index, which provides an objective metric for comparing the heating uniformity between simulations. The first method implements an iterative heuristic tuning strategy to functionally grade the electrical conductivity within the sample. The second method involves reorienting the electrodes during the heating stage such that the electric field is applied in two directions.

Both approaches are shown to improve the heating uniformity and predicted part geometry for several test cases when applied independently. However, the greatest improvement in heating uniformity is demonstrated by combining the approaches and using multiple electrode orientations while functionally grading the samples.

This work presents an innovative approach for overcoming RF heating uniformity issues to improve the resulting part geometry in an RF-assisted, volumetric additive manufacturing method.

The contemporary practice of cultural materials conservation is very much an interdisciplinary field. Preparing students to enter this profession requires a curriculum that combines humanistic and scientific understandings and methodologies. Findings from a review of a new coursework masters programme in Cultural Materials Conservation at the University of Melbourne are used to argue for greater alignment between graduate attribute statements, learning outcomes, assessment tasks and grading criteria. In particular, it is suggested that assessment tasks and grading criteria need to explicitly articulate the central features of interdisciplinary approaches.

The representation of Heterogeneous Object (HO) is divided into two categories: Data model (DM) and material evaluation paradigm (MEP). A hybrid methodology with geometry model and volumetric dataset to represent heterogeneous properties is proposed in this paper. Geometry model of an object can guarantee the accuracy of the final HO slices; and volumetric dataset lends the flexible manipulability and other advantages to HO representation. Two MEPs, namely distance field (DF) based and Fixed Reference Features & Active Grading Source(s) (FRF&AGS) are presented to facilitate the process of HO representation according to the designer)s input parameters. The DM can be modified interactively with users until the final satisfactory result is obtained. In this paper, a scheme of HO slicing is described. In this method, we utilize the slices contour of geometrical model as constraint to reconstruct the HO slices, which can theoretically achieve the same accuracy with the geometrical shape. Some examples of Heterogeneous object represented with our scheme are provided.