Search results

The purpose of this study is investigate the transient aerodynamic characteristics of high-speed vehicle with body roll motion under crosswind condition to improve aerodynamic stability.

An overset mesh was used to simulate the rolling motion of the vehicle body. A wind tunnel experiment was conducted to validate the numerical method.

The results revealed that the vehicle’s aerodynamic characteristics changed periodically with the body’s periodic motion. In the absence of crosswind, the pressure distribution on the left and right sides of the vehicle body was symmetrical, and the speed streamline flowed to the rear of the vehicle in an orderly manner. The maximum aerodynamic lift observed in the transient simulation was −0.089, which is approximately 0.70 times that of the quasi-static simulation experiment. In addition, the maximum aerodynamic side force observed in the transient simulation was 0.654, which is approximately 1.25 times that of the quasi-static simulation experiment.

The aerodynamic load varies periodically with the vehicle body’s cyclic motion. However, the extreme values of the aerodynamic load do not occur when the vehicle body is at its highest or lowest position. This phenomenon is primarily attributed to the mutual interference of airflow viscosity and the hysteresis effect in the flow field, leading to the formation of a substantial vortex near the wheel. Consequently, the aerodynamic coefficient at each horizontal position becomes inconsistent during the periodic rolling of the vehicle body.

The authors propose to estimate a varying coefficient panel data model with different smoothing variables and fixed effects using a two-step approach. The pilot step estimates the varying coefficients by a series method. We then use the pilot estimates to perform a one-step backfitting through local linear kernel smoothing, which is shown to be oracle efficient in the sense of being asymptotically equivalent to the estimate knowing the other components of the varying coefficients. In both steps, the authors remove the fixed effects through properly constructed weights. The authors obtain the asymptotic properties of both the pilot and efficient estimators. The Monte Carlo simulations show that the proposed estimator performs well. The authors illustrate their applicability by estimating a varying coefficient production frontier using a panel data, without assuming distributions of the efficiency and error terms.

This study aims to evaluate the efficacy of a digital medical library, including department-based electronic journal access, library training course participation and scholarly publications.

The data on full-text electronic journal access, participants of library training courses and scholarly publications were exported from a digital medical library database during 2017–2021. In addition, electronic journal access and library training courses were divided into high-level and low-level groups, while scholarly publications were divided into physician and non-physician groups.

The scholarly publications had a positive correlation to library training courses and electronic journal access. Furthermore, scholarly publications showed a significant difference between the high-level and low-level electronic journal access groups but not between the high-level and low-level library training course groups. Scholarly publications and electronic journal access had positive correlations for both the physician and non-physician groups. Scholarly publications and library training courses, and electronic journal access and library training courses had positive correlations only in the non-physician group.

The importance of electronic journal access for scholarly publications is suggested based on the findings of the present study. The training courses held by the medical library had a positive effect on scholarly publications for the non-physician group.

The current study provides insights relevant to the electronic journal access of library-supported scholarly publications among medical departments. These results can serve as a reference for medical library development planning and decision-making in the future.

This study aims to provide insights into Airbnb’s exit from the China market, specifically from the perspective of platform competition.

Based on the understanding of the evolution and competition of peer-to-peer (P2P) accommodation market in China and the double-edged network effects, this viewpoint article provides an in-depth discussion on Airbnb’s withdrawal from the China market.

This viewpoint paper contends that Airbnb faced increasing challenges in establishing unique competitive advantages against local rivals, who demonstrate a capacity for innovation and maintaining loyal customers in adapting to the market evolution. Consequently, this may inhibit Airbnb from attracting the mainstream market and lead Airbnb into a negative spiral, exacerbated by indirect network effects.

This study offers insights into the failure of an internationalisation process, drawing from an analysis of the competitive environment and the competition strategies of P2P accommodation platforms in China. These findings have practical implications for the implementation of international business strategies in P2P accommodation.

本观点文章旨在基于平台竞争的视角对爱彼迎退出中国的现象进行阐释

基于对中国共享住宿/民宿市场的演变和竞争、双边网络效应的理解, 本文对爱彼迎退出中国进行了深入探讨。

本文提出, 爱彼迎在建立独特竞争优势以应对本地竞争对手方面面临日益严峻的挑战, 因为本地竞争者在适应市场变化方面展现出突出的创新和留客的能力。这可能会阻碍爱彼迎吸引主流市场, 并导致其跌入由间接网络效应加剧的恶性循环中。

基于对中国共享住宿平台的竞争环境和策略的分析, 本文洞悉了一个国际化失败的案例。本文的发现对于共享住宿的国际化策略实施具有实践意义。

Este artículo de opinión pretende aportar ideas sobre la salida de Airbnb del mercado chino, concretamente desde la perspectiva de la competencia entre plataformas.

Basándonos en la comprensión de la evolución y la competencia del mercado de alojamientos P2P en China, así como en los “efectos de red de doble filo”, este artículo de opinión ofrece una discusión en profundidad sobre la retirada de Airbnb del mercado chino.

Este documento sostiene que Airbnb enfrentó desafíos crecientes para establecer ventajas competitivas únicas frente a sus rivales locales, demostrando estos últimos una capacidad de innovación y del mantenimiento de la lealtad de sus clientes al adaptarse a la evolución del mercado. En consecuencia, esto puede inhibir a Airbnb para atraer al mercado principal y llevar a la empresa a una espiral negativa, exacerbada por efectos de red indirectos.

Este estudio ofrece una visión del fracaso de un proceso de internacionalización, a partir de un análisis del entorno competitivo y de las estrategias de competencia de las plataformas de alojamiento P2P en China. Estos resultados tienen implicaciones prácticas para la aplicación de estrategias empresariales internacionales en los alojamientos P2P.

Although blockchain technology holds significant promise in influencing supply chain resilience (SCR), its effectiveness depends on a variety of factors. However, given that blockchain adoption in SCR is still in its infancy, there is a lack of empirical research to reveal the critical success factors maximizing its efficacy. This study aims to apply an organizational information processing theory (OIPT) perspective to explore how transformational supply chain leadership (TSCL) can facilitate the deployment and connection of blockchain technology to meet the imperatives of enhancing SCR.

This study used a two-wave survey method to gather data from 317 Chinese manufacturers to empirically examine the hypothesized relationships.

The findings suggest that the adoption of blockchain technology enhances both the proactive and reactive dimensions of SCR, and these effects can be realized through the mediating role of TSCL. Furthermore, the positive effect of blockchain technology on TSCL is strengthened in the context of dysfunctional competition.

These findings suggest that companies can only enhance the benefits of disruptive technologies, such as blockchain, by fully integrating them into the operational and supply chain processes.

This research offers novel insights into the specific processes of how blockchain technology can be used to enhance SCR. It also deepens our comprehension of how digital technology can be optimally harnessed within the framework of OIPT, thus providing a contribution to the literature on emerging technologies and SCR.

This study aims to investigate how relationship conflict (RC) hinders green customer integration (GCI) and which strategy could be developed to alleviate the negative effect of RC.

The authors use a sample of 206 Chinese firms to examine hypothesized relationships drawing on social exchange theory and buyer-supplier relationship perspective. Methods including exploratory factor analysis and confirmatory factor analysis are used to assess reliability and validity. Hypotheses are tested using hierarchical regression analysis. Post hoc analysis is adopted to evaluate the robustness.

The results show that RC negatively relates to GCI. Normative commitment partially mediates the relationship between RC and GCI, while the mediating role of instrumental commitment is insignificant. In addition, coercive influence strategy positively moderates the RC-normative commitment and RC-GCI relationships.

While this study clarifies the mechanism of how RC impedes GCI and how to address RC in buyer-supplier relationships, it could be more meaningful to extend the current research and figure out how to address RC in different supply chain relationships. Besides, it will make sense to conduct longitudinal studies and explore the dynamic nature of RC in supply chain relationships.

In practice, firms find it challenging to achieve GCI owing to the ubiquitous existence of RC. The findings reveal that RC detriments GCI partially through normative commitment, and the use of coercive influence strategy mitigates the detriments of RC. Thus, the authors provide solutions for firms to address RC for achieving GCI.

RC is unavoidable in organizational interactions. Prior studies have not revealed the processes through which RC relates to GCI. The authors bridge the gap by exploring the mediating role of organizational commitment and the moderating role of influence strategy, which offers a better understanding of how RC is associated with GCI, and add knowledge of addressing RC for achieving GCI.

The increasing accumulation of synthetic plastic waste in oceans and landfills, along with the depletion of non-renewable fossil-based resources, has sparked environmental concerns and prompted the search for environmentally friendly alternatives. Biodegradable plastics derived from lignocellulosic materials are emerging as substitutes for synthetic plastics, offering significant potential to reduce landfill stress and minimise environmental impacts. This study highlights a sustainable and cost-effective solution by utilising agricultural residues and invasive plant materials as carbon substrates for the production of biopolymers, particularly polyhydroxybutyrate (PHB), through microbiological processes. Locally sourced residual materials were preferred to reduce transportation costs and ensure accessibility. The selection of suitable residue streams was based on various criteria, including strength properties, cellulose content, low ash and lignin content, affordability, non-toxicity, biocompatibility, shelf-life, mechanical and physical properties, short maturation period, antibacterial properties and compatibility with global food security. Life cycle assessments confirm that PHB dramatically lowers CO₂ emissions compared to traditional plastics, while the growing use of lignocellulosic biomass in biopolymeric applications offers renewable and readily available resources. Governments worldwide are increasingly inclined to develop comprehensive bioeconomy policies and specialised bioplastics initiatives, driven by customer acceptability and the rising demand for environmentally friendly solutions. The implications of climate change, price volatility in fossil materials, and the imperative to reduce dependence on fossil resources further contribute to the desirability of biopolymers. The study involves fermentation, turbidity measurements, extraction and purification of PHB, and the manufacturing and testing of composite biopolymers using various physical, mechanical and chemical tests.

This study aims to explore how relationship trust and different types of influence strategy (i.e., non-coercive and coercive influence strategy) impact green customer integration (GCI), while investigating the moderating mechanisms of big data development and social capital.

Following hierarchical linear regression analysis, the authors examine hypothesized relationships by combining survey data from 206 Chinese manufacturers with secondary data.

The results show that relationship trust positively affects non-coercive influence strategy, while its impact on coercive influence strategy is insignificant. Non-coercive influence strategy has an inverted U-shaped impact on GCI. Furthermore, big data development flattens the inverted U-shaped relationship between non-coercive influence strategy and GCI. Conversely, social capital steepens the inverted U-shaped relationship between non-coercive influence strategy and GCI.

This study sheds light on managers on how to involve customers in GCI through friendly strategies that favor the involvement of customers and the willingness to develop environmentally friendly initiatives.

Although GCI has received widespread attention, how it can be enhanced remains unclear. These findings provide novel insights into the emerging GCI literature and complement social exchange theory.

External stakeholder risks (ESRs) caused by unfavorable behaviors hinder the success of project portfolios (PPs). However, due to complex project dependency and numerous risk causality in PPs, assessing ESRs is difficult. This research aims to solve this problem by developing an ESR-PP two-layer fuzzy Bayesian network (FBN) model.

A two-layer FBN model for evaluating ESRs with risk causality and project dependency is proposed. The directed acyclic graph (DAG) of an ESR-PP network is first constructed, and the conditional probability tables (CPTs) of the two-layer network are further presented. Next, based on the fuzzy Bayesian network, key variables and the impact of ESRs are assessed and analyzed by using GeNIe2.3. Finally, a numerical example is used to demonstrate and verify the application of the proposed model.

The proposed model is a useable and effective approach for ESR assessment while considering risk causality and project dependency in PPs. The impact of ESRs on PP can be calculated to determine whether to control risk, and the most critical and heavily contributing risks and project(s) in the developed model are identified based on this.

This study extends prior research on PP risk in terms of stakeholders. ESRs that have received limited attention in the past are explored from an interaction perspective in the PP domain. A new two-layer FBN model considering risk causality and project dependency is proposed, which can synthesize different dependencies between projects.

Motivated by the real-world practice that the boom of the online selling induces a higher product return as well, selecting which online channel mode indicates who takes ownership over the product and thus bears the loss of the product return. This paper aims to seek the optimal online channel modes for the two members in a platform supply chain in the presence of product returns.

This study aims to develop a platform supply chain that consists of one platform company and one supplier. Along with an offline distribution channel, the supplier can choose two alternative online selling modes (i.e. the reselling and agency modes) to sell its product through the online marketplace. This paper applies Stackelberg game to derive the equilibrium with different business scenarios and selects the optimal online channel modes for two parties, respectively. Moreover, this paper extends to a different supply chain with a reverse channel leadership and a different product return policy for testing the robustness.

Several interesting and important results are derived in this paper. Firstly, it is found that the relative pricing are largely relied on the costs of two channels. Secondly, the platform supply chain may benefit from a pure channel rather than the dual-channel when this channel enjoys a relatively low cost and/or a sufficiently high consumer preference. Then, the platform and the supplier act contradictorily when selecting their optimal online channel modes. To be specific, the platform motivates to choose the online reselling mode when both the commission rate and the slotting fee are relatively low, whereas the supplier is likely to select the online agency mode under this circumstance. Finally, a win-win situation in regards to the optimal online channel mode for two parties is achievable with numerical experiments.

Based on the analytical studies, the results derived in the authors’ work can provide managerial insights to assist the supplier and the platform company in determining the operational decision and selecting the optimal online channel mode to deal with consumer returns. In addition, appropriate commission rate along with slotting fee will make both parties achieve a win-win situation in determining their optimal online channel mode.

To the authors’ best knowledge, this paper makes the first move to determine the optimal online channel mode in the content of consumer returns and study how it is affected by different product return policies.